• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.6
• /
• pp.338-348
• /
• 2003

In the past decade, considerable progress has been made in developing the appropriate biotechnology for microalgal mass cultivation aimed at establishing a new agro-industry. This review points out the main biological constraints affecting algal biotechnology outdoors and the requirements for making this biotechnology economically viable. One of them is the availability of a wide variety of algal species and improved strains that favorably respond to varying environmental conditions existing outdoors. It is thus just a matter of time and effort before a new methodology like genetic engineering can and will be applied in this field as well. The study of stress physiology and adaptation of microalgae has also an important application in further development of the biotechnology for mass culturing of microalgae. In outdoor cultures, cells are exposed to severe changes in light and temperature much faster than the time scale re-quired for the cells to acclimate. A better understanding of those parameters and the ability to rapidly monitor those conditions will provide the growers with a better knowledge on how to optimize growth and productivity. Induction of accumulation of high value products is associated with stress conditions. Understanding the physiological response may help in providing a better production system for the desired product and, at a later stage, give an insight of the potential for genetic modification of desired strains. The potential use of microalgae as part of a biological system for bioremediation/detoxification and wastewater treatment is also associated with growing the cells under stress conditions. Important developments in monitoring and feedback control of the culture behavior through application of on-line chlorophyll fluorescence technique are in progress. Understanding the process associated with those unique environmental conditions may help in choosing the right culture conditions as well as selecting strains in order to improve the efficiency of the biological process.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.343-348
• /
• 2013

In line with the advances in factory automation, various pieces of equipment are now operated in batch processes controlled by computers. However, many kinds of faults can occur in complicated and large systems, which can result in low productivity and economic loss. The reliability and safety of systems have been studied because of the difficulty of determining the severity and location of faults. Therefore, it is necessary to detect and diagnose such faults in order to guarantee the reliability and safety of the equipment. In this paper, a diagnosis method for the ball bearings of a hydraulic pump is applied using a vibration signal for the maintenance of injection molding equipment. The bearings' defects are selected as a main failure mode through a failure mode and effect analysis (FMEA). Usually, there are nonlinear and impulse components of vibration in a ball bearing with faults. For the effective fault diagnosis of a ball bearing, nonlinear diagnostic methods and time-frequency analysis are applied, in addition to the methods currently used, such as power spectrum, time series analysis, and statistical methods. As a result of this study, a failure diagnosis system is provided that is useful even for non-experts. This is a condition-based method that makes it possible to resolve problems in a timely and economical way, in contrast to the prior method, which required regular but wasteful maintenance based on the experience of expensive external experts.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.149-152
• /
• 2005

A new methodology to detect forest fire burnt scars at near real time using MODIS (Moderate-resolution Imaging Spectroradiometer) data is presented here with a goal of introducing a new and improved capability to detect forest fire burnt scars in Thailand. This new technology is expected to increase the efficiency and effectiveness of the forest fire tackling resources distribution and management of the country. Using MODIS data in burnt scars detection has two major advantages - high availability of data and high resolution per performance ratio. Results prove the near real time algorithm suitable and working well in order to monitor the forest fire dynamic movement. The algorithm is based on the threshold separated linear equation of burnt and un-burnt. A ground truth experiment confirms the burnt and un-burnt? areas characteristics (temperature and NDVI). A threshold line on a scatter plot of Band I and Band 2 is determined to separate the burnt from un-burnt pixels. The different threshold values of NDVI and temperature use to identify pixels' anomaly, abnormal low NDVI and high temperature. The overlay (superimpose) method is used to verify burnt pixels. Since forest fire is a dynamic phenomenon, MODIS burnt scars information is suiting well to fill in the missing temporal information of LANDSAT for the forest fire control managing strategy in Thailand. This study was conducted in the Huai-Kha-Kaeng (HKK) Wildlife Sanctuary, Thailand

• Health Policy and Management
• /
• v.4 no.2
• /
• pp.1-26
• /
• 1994

As the hospital environment is changing rapidly, management is therefore obligated to use new ways to provide better service to patients. For example information system is introduced to some hospitals in Korea. Information system has several benefits such a soperational efficiency by on-line delivery and processing of data, accurate and rapid information production, continuous monitoring of performance and feedback, improvement of work process and better service quality. Still, many hospitals cannot be sure that information system is useful for improving organization performance. Because only one or two area of hospital information system were considered for development and with limited development hospital information system cannot be used effectively. The purpose of this study is to suggest the model of information system utilizaton and to analyze the hospital in formation system in Korea. The results are following; 1. In Korea, proportion of operating system of comuter is 31% of UNIX, 11% of IBM OS and 10% of PC LAN. 2. As we expect, scope of application software and amounts of heardware and software invest ments are affected by concern of CEO. 3. Many CIO(chief information officer) say that the biggest problems are lack of after-service and obsolescence of computer equipments in terms of hardware and shortage of application software for hospital in terms of software. 4. Personnel of information system department is so small that hospital information system can't be improved. 5. During the development of information system, full-time participation of end user is only 20% hospital with almost less than 12 person-month. This study was accomplished by survey through mail questionnaires. Response to the survey was only 55% and it was hard to generalize all the result obtained from this survey. However, We hope that this study would be helpful for helth care organization to acknowlege hospital information system in korea and to design the future architecture and frame of information system.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.53-61
• /
• 1999

The safety of gas utilities is intimidated by many causes. Among them, subsidence is a dominant cause to decrease the safety of gas utilities. So it is very important to monitor the displacement of subsidence. The purpose of this study is to on-line monitor the subsidence of gas utilities using Static GPS(Global Positioning System)technique. Static GPS technique, which is one of various GPS techniques and originally applied to monitor the crustal activity, was applied for two gas station in Korea Gas Corporation. Prior to applying this technique to the field, i.e, gas station, a preliminary test was peformed to confirm the accuracy of this technique. As a result, it was proved that this technique can measure the displacement of gas utilities three dimensionally by sub-millimeter. After getting confirmation of GPS technique, we applied this technique for two gas stations and monitored the amount of subsidence during 5 months. As a result of field test, we can conclude that the gas stations was subsiding several millimeters in a year.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1343-1347
• /
• 2013

This paper presents an analysis methods for current collection quality in catenary system by means of video image based monitoring system. Arcing is the sparking at the interface point between pantograph and contact wire when the electric trains have traction current values at speed. Percentage of arcing at maximum line speed is measurable parameters for compliance with the requirements on dynamic behaviour of the interface between pantograph and contact wire in accordance with requirement of IEC and EN standards. The arc detector and video is installed on a train aim at the trailing contact strip according to the travel direction. The arc detector presented and measured verity of value such as the duration and power density of each arc and the video image is measured a image when the arc is occurred in pantograph. In this paper we analysis of video image in accordance with power density of arcing from arc detector and compared with video image and power density of arcing so as to produce quality of arcing from image.

• Biomolecules & Therapeutics
• /
• v.15 no.2
• /
• pp.102-107
• /
• 2007

Cimetidine, a substrate for P-glycoprotein (P-gp), is a well known drug interacting with a variety of drugs and results in alteration of pharmacokinetic parameters by concomitant administration. The aim of present study was to investigate whether cimetidine affects the transport of various quinolone antibiotics in human colorectal cancer cell line (Caco-2) system which has been typically used to investigate drug transport via P-gp. The apparent permeability coefficients (P$_{app}$) value of 9 quinolone antibiotics in the co-treatment with cimetidine was examined. Apical to basolateral (AP-to-BL) transport of fleroxacin in the co-treatment with cimetidine was increased to 1.5-fold (p<0.01) compared with that of fleroxacin alone, whereas basolateral to apical (BL-to-AP) transport of fleroxacin was decreased to 0.83-fold significantly (p<0.05). Ofloxacin was decreased to 0.8-fold (p<0.01) and 0.72-fold (p<0.01) significantly in AP-to-BL and BL-to-AP direction, respectively by cimetidine cotreatment. The P$_{app}$ values of gatifloxacin, moxifloxacin, ciprofloxacin and rufloxacin also were changed by cimetidine. These results have a potential that cimetidine influences on the pharmacokinetics of quinolone antibiotics. It suggests that careful drug monitoring and dosage adjustment may be necessary during the co-administration of quinolone antibiotics with cimetidine.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.142-149
• /
• 2013

As we, human expand its everyday life boundary to the geosynchronous orbit, we have experienced frequent chance of the atmospheric re-entry and surface impact of space objects(satellite and space debris). Recently a satellite re-entry monitoring room in Korea has been operated to predict the time and the location of the re-entry of space objects. However, we do not have a domestic version of a numerical re-entry model for normal operation using TLE (Two line Element) information from the United States Strategic Command yet. The space information from the several space operation centers has been used to analyse the re-entry situations. In this paper, the re-entry time is calculated with TLE based on the several atmosphere models, the result is comprehensively analyzed, a new re-entry case model fitted from the result of the predicted satellite re-entry times by a new Rubber Sheet Shift Method used by the domestic satellite re-entry room is suggested.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.90-96
• /
• 2003

This study was performed to evaluate effect of extraction mode on SVE efficiency for fuel-contaminated soil. A gas station was selected for this study. As a result of pressure test in well head, soil texture of contaminated site under the gas station was very different from site to site. SVE system was operated in intermittent mode (1hr extraction / 3hr rest) or continuous mode. Capacity of air blower was $1m^3/min$. Extration mode test was conducted in two severe contaminated sites. In both two sites, cumulative TPHgas mass of intermittent extraction mode was higher than that of continuous mode. Considering long term operation of SVE in a field, in general, it was thought that intermittent extraction mode was effective in view of vaporized TPHgas mass and electrical cost.