• Journal of Radiation Protection and Research
• /
• v.29 no.2
• /
• pp.141-150
• /
• 2004

Dose rate characteristics of cosmic radiation field at flight altitudes were analyzed and the route doses to the personnels on board due to cosmic-ray were calculated for Korean-based commercial international airline routes using CARI-6. Annual individual doses to aircrew and the collective effective dose of passengers were estimated by applying the calculated route doses to the flight schedules of aircrew and the air travel statistics of Korea. The result shows that the annual doses to aircrew, around 2.62 mSv, exceed the annual dose limit of public and are comparable to doses of the group of workers occupationally exposed. Therefore it is necessary to consider the frequent flyers as well as the aircrew as the occupational exposure group. The annual collective dose to 11 million Korean passengers in 2001 appeared to be 136 man-Sv. The results should be modified when the dose rates of cosmic radiation at high altitude are revised by taking into account the changes in the radiation weighting factors for protons and neutrons as given in ICRP 92.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8B
• /
• pp.1460-1468
• /
• 2000

The goal of this research is the real-time implementation of MPEG-1 Layer III audio decoder using the fixed-point digital signal processor of TMS320C6201 The main job for this work is twofold: one is to convert floating-point operation in the decoder into fixed-point operation while maintaining the high resolution, and the other is to optimize the program to make it run in real-time with memory size as small as possible. We, especially, devote much time to the descaling module in the decoder for conversion of floating-point operation into fixed-point operation with high accuracy. The inverse modified cosine transform(IMDCT) and synthesis polyphase filter bank modules are optimized in order to reduce the amount of computation and memory size. After the optimization process, in this paper, the implemented decoder uses about 26% of maximum computation capacity of TMS320C6201. The program memory, data ROM, data RAM used in the decoder are about 6.77kwords, 3.13 kwords and 9.94 kwords, respectively. Comparing the PCM output of fixed-point computation with that of floating-point computation, we achieve the signal-to-noise ratio of more than 60 dB. A real-time operation is demonstrated on the PC using the sound I/O and host communication functions in the EVM board.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.3-11
• /
• 2002

Recently, waste printed circuit board (PCB) has significantly increased in its amount due to the rapid development of electronic industries. Since several kinds of noxious materials and also valuable metals are contained in it, the waste PCB is in an urgent need of recycling for the dual purposes for the prevention of environmental pollution and recovery of valuable resources. Also, the catalyst which equipped in the exhaust pipes of automobiles to reduce emission of air pollutants contains precious met-als so that their recovery from the waste auto-catalysts is required. In this study, the recovery of valuable metals from waste PCB and auto-catalyst by arc furnace melting process has been investigated, which is known to be very stable and suitable f3r less production of pollutants due to its high operating temperature. The effect of the kind of flux on the recovery of precious metals was examined by using quicklime, converter slag, and copper slag as the flux. In addition, the influence of direct and alternating current and the applying direction of direct current has been investigated. It was observed that using converter or copper slag as a flux was more desirable for a higher efficiency in the precious metal recovery compared with quicklime. For the effect of current, application of direct current taking the bottom as a negative pole generally showed a better efficiency for the extraction of valuable metals from waste PCB, which was also observed for the case of waste auto-catalyst. The average recovery of precious metals from both wastes by arc furnace melting process was very high, which was up to in the range of 95～97%.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.248-254
• /
• 2014

The purpose of this study is to develope a control system for a small X-ray tube generator and investigate control methods for the X-ray generator. The small X-ray tube was developed for electronic brachytherapy, and thus, the new control method should be investigated, if the small X-ray tube is used for the imaging system. The Axxent S700 X-ray tube and the XF060NZZ485 high voltage generator were used to compose a X-ray imaging system and control board was developed by using AT90CAN128 MCU. The two control methods were investigated after tube voltage was set to 50 kV, one was filament current control method and the other was beam current control method. The former was subdivided into two methods according to the filament heating time, the 5 and the 10 seconds respectively. In the filament current method, the beam current did not rise up to the desired value, if the filament current had not been maintained for at least 10 seconds. The onset filament currents to generate beam current were varied from 1,300 to 1,350 mA and over 5 seconds were needed in order to reach the desired tube current value after beam current was generated. However, in the tube current control method, the beam current reached to the desired value without any time delay with the filament current of 1,500 mA. In this study, we found that the beam current control method was appropriate for the use of small X-ray tube developed for brachytherapy in the X-ray imaging system.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.287-294
• /
• 2003

There are a lot of curved subway stations in Seoul metropolitan area. These must be straightly constructed as many as possible. But some of stations are roundly designed and built in order to avoid pre-existed underground obstacle such as basement of high rise building, underground gas or water pipe line and subway stations from another line. As shown fig 1, one of the biggest problem occurring curved subway station is considered large gap between platform and vehicle when vehicle completely stop at the station. The gap potentially is in existence to subway passenger as very dangerous factors in rush hours. If passenger accidentally drop their food or leg between this gap when they get on the train and train leaves station, the passenger will be seriously injured by vehicle. In this paper, various design and instruments are introduced and best solution for this matter will be presented. In order to eliminate any possibility of accident happened gap between platform and vehicle, KRRI(Korea Railroad Research Institute) have been developed new safety instrument. These technologies were applied for patent by KRRI. These mechanisms will provide confidence as well as safety to Korean subway passenger

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2009

Watermelons (Citrulus vulgaris Schrad) are usually sorted manually by weight, appearance, and acoustic impulse, so grading of maturity and internal quality is subject to inaccuracies. It was necessary to develop a nondestructive evaluation technique of internal watermelon quality to reduce human error. Thus, acoustic characteristics related to internal quality factors were analyzed. Among these factors, three (ripeness, presence of an internal cavity, and blood-colored flesh) were selected for evaluation. The number of peaks and the sum of peak amplitudes for watermelons with blood-colored flesh were lower than for normal fruits. The portable evaluation system has an impact mechanism, a microphone sensor, a signal processing board, an LCD panel, and a battery. A performance test was conducted in the field. The internal quality evaluation model showed 87% prediction accuracy. Validation was conducted on 72 samples. The accuracy of quality evaluation was 83%. The quality of samples was evaluated by an inspector using conventional methods (hitting the watermelon and listening to the sounds), and then compared with prototype results. The quality evaluation accuracy of the prototype was better than that of the inspector. This nondestructive quality evaluation system could be useful in the field, warehouse, and supermarket

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.1
• /
• pp.36-50
• /
• 1998

The purpose of this study was to investigate quantity food production practices in foodservices by analysing the menus of April, 1996, The questionnaire was developed and responded to by 96 dietitians in Sangju, Munkyung, Gumee, Kimchun, and Andong during November, 1996. The survey was performed by simple random samplings. The results were as follosw; 1. Hospitals and industry served food for thirty days and schools for twenty days. Kimchi was a select-menu for hospitals and one side dish for industry and schools. The type of menu was a single use menu which consisted of cooked rice, soups and three side dishes. 2. The most frequently used ingredients were green onions, rice, carrots, onions, Korean radish roots, pork, eggs, glutinous rice, and milk. Kimchis were served most frequently in all food services and cooked rices and soups were next. 3. The age of most of the respondents was 26 to 30.54.2% of subjects were juniou college graduates and 77.1% were single. Fifty seven point three percent of the dietitians lived with family relatives, or friends. 87.5% of the dietitians had been working for 1 to 5 years. 4. Most foodservices were self-operated. The number of meals served was determined by meal coupon counting in hospitals(37.5%), meal board counting in industry(29.2%), and attendance card counting in schools(41.1%) The cost of sales per meal was approximately 2,450 won in hospitals and was approximately 1,100 won in industry and schools. The average number of days per menucycle was 7.4 in hospitals. 10.3 in industry and 25.5 in schools. Hospitals, industry, and schools held about 118, 265 and 263 recipes respectively. The average number of dietitians was 2.6 in hospitals and 1.0 in industry and schools. Except for the number of recipes, the general practices of foodservices were significantly different(P<0.05). 5. In the general quantity food production, food and seasonings measuring was hardly done. the percentage of foodservices using chemical seasonings was higher in hospitals and industry than in schools. the most important concern was taste, Registered cooks were employed in 75% of schools but only 50.0% in hospitals and 20.8% in industry. Most of the dietitians respinded that their cooks skill was not bad. The education of unregistered cooks was performen once or two times a month in hospitals and industry, and in schools performed everyday. The problem when educating cooks was the lack of cooking skill of the dietitians in schools, and the lack of time in hospitals, and the negative attitude toward education in industry. The method for improving cooking in all foodservices was OJT, or the extension of education facilities and the development and dissemination of standard recipes. The frequency of throwing away leftovers was higher in hospitals. But in industry, the frequency of saving leftovers was higher. 6. Though all foodservices have standard recipes, the number that used them was low, Another problem is that standard recipes resulted in leftovers. The inconveniences of using standard recipes were the difficulty of applying standard recipes to various numbers of customers the complication of use, or facility insufficiency.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.203-214
• /
• 2010

This study numerically investigates the wave control of 2-rowed Impermeable Rectangular Submerged Dike(IRSD) with an object of how to control short-period and solitary waves simultaneously based on the Bragg resonance phenomenon that elevates the wave control performance. The boundary integral method using Green formula and the 3-D one-field Model for immiscible TWO-Phase flows (TWOPM-3D) by 3-D numerical wave flume have been used for the numerical predictions for short-period and solitary waves, respectively. These numerical models were verified through the comparisons with the previously published numerical results by other researchers. Through the parametric tests of numerical experiments for short-period waves, an optimum model of 2-rowed IRSD of a lowest transmission coefficient has been found. Furthermore, the performances of 3-D wave control for solitary waves were evaluated for the various free board, crown widths and gap distance between dikes, and have been compared with those of a single-rowed IRSD. Numerical results show that a 2-rowed IRSD with a less cross sectional area than 1-rowed one improves the wave attenuation performances when it is compared to that of single-rowed IRSD. Within the test frequency ranges of the numerical simulations conducted in this study, 2-rowed IRSD with an optimum gap distance shows an outstanding improvement of the wave attenuation up to 58% compared to that of single-rowed IRSD.

• Clean Technology
• /
• v.18 no.4
• /
• pp.440-445
• /
• 2012

15 carbon footprint product (CFP) schemes, including Korea Carbon Footprint Label, UK Carbon Trust's Carbon Reduction Label and Japan CFP are implemented in the world. A CFP describes green house gases (GHGs) emissions emitted throughout product's life cycle and is intended to reduce GHGs emissions by labeling a CFP result on product. This study calculates Korea, UK and Japan CFP result of vacuum cleaner, detergent, packagin material in order to analyze the Korea, UK and Japan CFP standards. Our results demonstrate significant differences among then calculated results because of criteria, emission factors, etc. Therefore, there are many difficulties in providing various CFP results and the international standard and guidelines for product category are needed.

• Korean Journal of Social Welfare
• /
• v.57 no.4
• /
• pp.5-33
• /
• 2005

In order to examine the causes of the social policy changes in Korea during the late of 1990s, this study tries to compare the social policy decision-making structure between Kim Yong-Sam Government and Kim Dae-Jung Government. This study applies policy network analysis method which measures the relation and power structures of policy actors and as a result shows the characteristics of the policy making structure. Analysing the 6 policy domains and 52 policy events, this study finds that the importance and location of veto points which were created by the social policy decision processes have changed. In Korea, social policy decision processes have been produced power structures in which Ministry of Finance and Economic Planning Board have played a decisive role. In result, these executives can have controlled policy making processes and had veto power, i. e. veto points in policy decision-making structure. But, during Kim Dae-Jung government, accountability issues of financial crisis and reorganization of ministries have changed the importance and location of veto points. Pro-welfare groups of civil society got a chance to penetrate policy decision-making structure during that time. This study argues that these changes of policy decision-making structure may be associated with the social policy changes in Korea during the late of 1990s.