• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.11 s.116
• /
• pp.1100-1107
• /
• 2006

As environmental vibration requirements on precision equipment become more stringent, use of pneumatic isolators has become more popular and their performance is subsequently required to be further improved. Performance of passive pneumatic isolators is related to various design parameters in a complicated manner and, hence, is very limited especially in low frequency range by chamber volume. In this study, transmissibility behavior of the pneumatic isolators depending on frequency and dynamic amplitude are presented. Then, an active control technique, time delay control, which is adequate for a low frequency nonlinear system, is applied. A procedure of applying the time delay control law to a pneumatic isolator is presented and it's effectiveness in the transmissibility performance is shown. Comparison between passive and active pneumatic isolators is made based on simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.837-843
• /
• 2006

As environmental vibration requirements on precision equipment become more stringent, use of pneumatic isolators has become more popular and their performance is subsequently required to be further improved. Performance of passive pneumatic isolators is related to various design parameters in a complicated manner and, hence, is very limited especially in low frequency range by chamber volume. In this study, transmissibility behavior of the pneumatic isolators depending on frequency and dynamic amplitude are presented. Then, an active control technique, time delay control, which is adequate for a low frequency nonlinear system, is applied. A procedure of applying the time delay control law to a pneumatic isolator is presented and it's effectiveness in the transmissibility performance is shown. Comparison between passive and active pneumatic isolators is made based on simulation.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.175-177
• /
• 2007

This paper is concerned with a performance analysis using a wired/wireless gateway based on DeviceNet. For the performance analysis, the data transmission time between DeviceNet and the wireless devices is investigated and analyzed. The experimental results show the perfom1ance in terms of the polling/COS service time and end-to-end delay.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.11-16
• /
• 1998

DS/CDMA systems for the high speed communication require high code rats. In discrete time CDMA receivers, the performance degradation, caused by the phase difference between transmission code and reference code, increase the sampling frquency of the receiver. This increment of the sampling frequency makes hard to implement high speed CDMA systems. This paper analyzes the SIR(signal to interference Ratio) performance of the discrete time DS/CDMA system, based on the code phase difference. The results of this paper may be useful to study a low-sampling CDMA receiver.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4349-4371
• /
• 2019

Moldable parallel tasks are widely used in different areas, such as weather forecast, biocomputing, mechanical calculation, and so on. Considering the deadline and the speedup, scheduling moldable parallel tasks becomes a difficulty. Past work majorly focuses on the LA (List Algorithms) or OMA (Optimizing the Middle Algorithms). Different from prior work, our work normalizes execution time and makes all tasks have the same scope in normalized execution time: [0,1], and then according to the normalized execution time, a method is used to search for the reference execution time without considering the deadline of tasks. According to the reference execution time, we get an initial scheduling result based on AFCFS (Adaptive First Comes First Served) policy. Finally, a heuristic approach is used to improve the performance of the initial scheduling result. We call our method HSRET (a Heuristic Scheduling method based on Reference Execution Time). Comparisons to other methods show that HSRET has good performance in AWT (Average Waiting Time), AET (Average Execution Time), and PUT (Percentages of Unfinished Tasks).

• KIISE Transactions on Computing Practices
• /
• v.21 no.5
• /
• pp.379-386
• /
• 2015

We propose a novel user-perceived performance optimization framework for the Android platform that takes advantage of the user-centric response time analysis. To this end, we propose a new definition of response time, which we call the user-centric response time, as a metric for the quality of user-perceived performance of the smartphone application. In this paper, we describe the design and implementation of an on-line user-centric response time analyzer for Android-based smartphones, which provides smartphone application developers with valuable insight for user-perceived performance optimization. We implemented the user-centric response time analyzer on the Android platform, version 4.0.4 (ICS) running on a Galaxy Nexus smartphone. From our experimental results, the proposed user-centric response time analyzer accurately estimates user-centric response times with an accuracy of 92.0% compared to manually measured times with less than 1% performance penalty. In order to evaluate the efficiency of the proposed framework, we were able to reduce the user-centric response time of the target application by up to 16.4% based on the evaluation results by the proposed framework.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.162-167
• /
• 2021

Objective: This study aimed to identify the different wind speed categories and competitive level among windsurfers through GPS variables to provide the useful information on the development of training programs for enhancing windsurfers' performance. Method: Data from 69 female athletes who participated in 27 races during the 2018-2019 windsurfing season were used for the analysis. Average board speed, total race time, total distance, upwind race time, downwind race time, beam reach race time were collected through GPS. Unconfirmed data were excluded along with penalty point data. The wind conditions were classified as light, light to medium, medium, medium to heavy, and heavy wind, the competitive levels were classified as level 1, level 2, and level 3. Results: As for the average board speed, the level 1 or level 2 group showed higher board speed than the level 3 group in all wind conditions except for the light wind. The total race time and upwind race time showed less time in level 1 or level 2 group than level 3 group in all wind conditions. The total distance, downwind race time and beam reach race time showed less distance and time in level1 group than level 3 group under sufficient wind conditions. Conclusion: Our results show that the aerobic capacity to sustain pumping during upwind course in wind conditions below 15 kts effects performance. In wind conditions of 15 kts or more, indicated that the board control for the fast board speed and small distance required during up, down, beam reach courses had an effect on competition performance. This information can be provided to windsurfers and coaching as basic data for training programs to improve performance.

• The Journal of Information Technology
• /
• v.9 no.4
• /
• pp.75-85
• /
• 2006

This study is to test the influence of stock option granting information on the firm's performance. The important issue in stock option is that agent cost is the important determinant factor for the long term performance. The agent cost arises between the manager and shareholders. So many study are concentrated in diminishing the agent cost, and develop some substitute tools to measure the agent cost. The event study about stock option analyzes returns around event date at a time. Event study provides estimation periods and cumulative returns. Announcements about stock option are generally associated with positive abnormal returns in short term period, but not showing positive effect in long term period. It is important to investigate the responses of stocks to new information contained in the announcements of stock option. Therefore it is important to study the long term performance in the case of stock option. The event time portfolio approach exists the CAR model, BHAR model and WR model. And the calendar time portfolio approach has the 3 factor model, 4 factor model, CTAR model, and RATS model. This study is forced to develop and arrange two approach method in evaluating the performance, the event time portfolio approach and calendar time portfolio approach.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.304-309
• /
• 2015

On construction sites, it is important to monitor the performance of construction equipment and workers to achieve successful construction project management; especially, vision-based detection methods have advantages for the real-time site data collection for safety and productivity analyses. Although many researchers developed vision-based detection methods with acceptable performance, there are still limitations to be addressed: 1) sensitiveness to the shape and appearance changes of moving objects in difference working postures, and 2) high computation time. To deal with the limitations, this paper proposes a detection algorithm of construction equipment based on Integral Channel Features. For validation, 16,850 frames of video streams were recorded and analyzed. The results showed that the proposed method worked in high performance in terms of accuracy and processing time. In conclusion, the developed method can help to understand useful site information including working pattern, working time and input manpower analyses.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.65-68
• /
• 2007

DOCSIS 3.0 MAC protocol regulate CM and CMTS Channel transfer times through MAP message. Standards does not include the details of MAP Inter-arrival Time affecting the performance of MAC protocols for DOCSIS 3.0. In this paper, we evaluationed the performance of protocol follow in MAP Inter-arrival Time on DOCSIS 3.0. Based on the evaluation results, we propose the optimal MAP Inter-arrival Time. We found that the protocol shows best performance when the MAP Inter-arrival Time is 0.05sec. The research results can apply to performance element which important for the construction of DOCSIS 3.0 base cable networks.