• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.33-33
• /
• 2000

In this paper a new distributive control system for BA(Building Automation ) lighting control used on general microprocessors is presented. For optimal lighting control and saving energy, The system have to control the group and pattern lighting control as well as individual light control at one time. Tn this paper, This functions are accomplished with low-cost and simple microprocessor. A plurality of modulated light control terminals are connected to the central control unit through a pair of power line. This power line provide both power and signal to the each terminal and the data is transmitted through cyclic time division multiplex transmission. With this structure a low-cost distributive control system for lighting applications has been achieved, allowing energy and maintenance saving and reliability increase of the light control system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.299-304
• /
• 2008

Catenary and Pantograph are a power supply devices for electric trains and shall be steadily contacted. Rail catenary must be installed precisely and managed for stable train operations. But external factors such as weathers, nature, etc., or aging affect catenary geometry. Changed catenary height causes high voltage spark or instant electric disconnection. Big spark and disconnection damage pantograph shoe and catenary coating and might interrupt rail operations. To prevent a big scale spark or electric disconnection catenary maintenance shall be required with catenary geometry measurement systems. In this paper, we describe the development of catenary height and stagger measurement system. The catenary height and stagger measurement system uses Acuity company's AR4000 Range Finder for distance measurement and AccuRange Line Scanner for degree measurement. This system reports suspicious overhead line sections with excessive height and stagger variance.

• 조명전기설비학회논문지
• /
• 제12권2호
• /
• pp.54-61
• /
• 1998

PLC를 사용한 공정제어시스템의 설계에서 PLC 표준언어중 LD 언어가 가장 널리 사용되고 있다. 그러나 LD 언어는 데이터처리와 유지보수에 대한 단점이 있다. 반면에 SFC 그래픽언어는 복잡한 순차동작을 간결하게 記述할 수 있는 완벽한 방법이지만, 인터록조건을 記述하는데 문제점이 있다. 본 논문에서는 기존의 SFC 컴파일러를 사용하여 인터록을 실현하는 방법을 제시하고, 실예로서 In-Line Spin Coater에 적용하여 타당성을 확인하였다.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.288-292
• /
• 2010

Recently, in energy storage system, the EDLC is paid attention as a new environmentally friendly energy storage element. This capacitor has higher energy density than the electrolytic capacitor. Also, this capacitor has a lot of advantage such as no maintenance, longer life cycle and faster charge-discharge time than the battery system. But the EDLC must have a each charge-discharge controller to effectively control, an energy design method circuit to use effectively energy, and several compensation techniques to control a optimal operating. In this respect, this study suggests major parameters to effectively represent the characteristics of EDLC, the measurement methods of those parameters have been investigated with experiments, and the interpretation about the buck/boost DC/DC converter for the operation of EDLC.

• 한국농촌건축학회논문집
• /
• 제2권3호
• /
• pp.65-76
• /
• 2000

This study aims to clarify the characteristics of townhouse corresponding to the changing life style for the future, and suited to the small and medium urban areas of Korea(focused on Chongju area) from its traditionality and regionality's point of view. The results of this study are as follows; 1. The traditional design elements of Chongju area : 1) A court; a court of inner building - light, wind. 2) A balcony; intermediate space, cornice. 3) Eave line; a horizontal line for approach. 2. The regional design elements of Chongju area : 1) Maintenance of skyline which had the same building height as strip of road. 2) The formal spatial design elements to think about natural view. 3) Simple appearance and delicate detail.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.376-378
• /
• 2003

Since the first underground transmission line of Korea was installed between Danginri and Yongsan substations in 1974, the two types of underground transmission power cables, oil-filled and XLPE, have been applied for underground transmission lines. As the manufacturing technologies of XLPE cable have been improved and the simplicity of installation and maintenance has been focused on, the installations of XLPE cables have been largely increased since the mid 1990's. For the first time, in Korea, the 345kV XLPE cable was installed between Youngseo and Youngdeungpo substations in 2003, June. So, this paper introduces the project profile, the design of cable and its accessory, the cable system design, installation and site test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1815-1817
• /
• 2003

Since the first underground transmission line in Korea was installed in 1974, the two types of underground transmission power cables, oil-filled and XLPE, have been applied for underground transmission lines. As the manufacturing technologies of XLPE cable have been improved and the simplicity of installation and maintenance has been focused on, the installations of XLPE cables have been largely increased since the mid 1990's. For the first time, in Korea, the 345kV XLPE cable was installed at Pyungtaek thermal power plant in 2003, February. So, this paper introduces the project profile, the design of cable and its accessory, the cable system design, installation and site test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.384-385
• /
• 2007

The fault current through the earth originated from a power line ground fault might cause arcing through the soil to an adjacent pipeline, which might bring about not only a catastrophic accident such as gas explosion and oil leakage but also a hazard to the safety of workers responsible for the maintenance and repair of the pipeline. In this paper we experimented on the soil breakdown test using the fixture and outlined the standards for the separation distance of a buried pipeline adjacent to the power line tower.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.145-152
• /
• 2016

OBJECTIVES : Visibility at night can be improved by using retroreflection for short distances and phosphorescent line markings for long distances. In this study, we analyzed the characteristics of the phosphorescent line marking through a laboratory luminance test. Field performance analysis was performed through tests conducted on the road. We also examined the luminance measurement methods using the digital image obtained during the phosphorescent visibility evaluation. METHODS : In this study, the laboratory luminance test of the phosphorescent line marking was conducted using seven specimens to characterize the luminance changes according to the type of the glass beads, the thickness of the phosphorescent line marking, and the brightness and irradiation time of the light source. Phosphorescent and general line markings were made at 150 m to investigate the field luminance performance. A preliminary review of the luminance measurement methods was made using a digital image from a digital single-lens reflex (DSLR) camera. The measured luminance ratio of the general and the phosphorescent line markings was compared with the calculated luminance ratio using luminance analysis. RESULTS : Through the laboratory luminance test, it was seen that the change in luminance, which corresponds to the brightness of the light source, appears large but the influence of the thickness and irradiation time is low. The field performance test of the phosphorescent line marking conducted on the road involved measuring the luminance on the day the marking was made and 7 days after the marking was made. The luminance was found to be $190mcd/m^2$ at 30 min after sunset and approximately $10-12mcd/m^2$ 4h after sunset. The results of the luminance test were captured using a digital image for each time group. The luminance ratio of the phosphorescent line marking, when compared to that of the general line marking, showed a similar trend within a 13% maximum error. Additionally, when this luminance ratio is compared to the direct field measurement, it could be confirmed that the luminance ratio, as captured in the digital image, showed a similar tendency. CONCLUSIONS : 1) The change in luminance corresponding to the brightness of the light source is significant in comparison with that corresponding to the thickness and the irradiation time. In addition, the results of the field test for the phosphorescent line marking satisfied the phosphorescent fire protection standard. 2) We examined the validity of the luminance measurement method using a digital image and we concluded that the change in the luminance ratio shows a similar tendency in both the cases. The results can form the basis for luminance measurement methodology for the construction and maintenance of phosphorescent line markings.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권6호
• /
• pp.77-83
• /
• 2019

원자력발전소에 지진격리장치를 설치하면 지진에 의한 하중을 지진격리장치가 담당하면서 설치 전보다 큰 변위가 발생하게 될 것으로 예상되며, 변위증가에 따라 일부 설비의 지진리스크가 증가될 가능성이 있다. 특히 지진격리된 구조물과 일반 구조물을 연결하는 설비인 배관 시스템의 경우 지진리스크가 크게 증가될 것으로 예상된다. 본 연구에서는 원자력발전소 배관 시스템의 취약부위인 강재 배관 Tee의 한계상태를 누수로 정의하고 면내반복가력시험을 수행하였다. 강재 배관 Tee의 모멘트와 변형각은 기존의 센서를 이용한 계측이 어려우므로 이미지 신호를 이용하여 측정하였다. 본 연구에서는 3인치 강재 배관 Tee의 모멘트와 변형각의 관계를 이용한 누수 선도 및 저주기 피로 곡선들을 제시하였다.