• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.7
• /
• pp.407-413
• /
• 2003

Before expanding of distribution automation application to distribution network, we must examine whether there are economical effect. Investment expense for distribution automation can be divided into facility investment expense, maintenance expense, communication expense, investment expense etc. Effect of distribution automation can classify by effect that can convert into money and effect that can not convert into money. Representative effect is outage time decrease effect, distribution line loss decrease effect, main transformer upload effect, distribution line upload effect, work environment improvement effect of lineman and so on. This paper studied economical effect and break-even Point for investment expense by using data that acquire in KEPCO's distribution network.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.222-229
• /
• 2006

Recently, the development of the paved track is required as a low-maintenance of conventional line. The main reason is that the line capacity and bearing of track are increased progressively. The important factors of paved track are stability and applicability. To be based on this subject, Cement Mortar Pouring(CMP) paved track is developed. CMP paved track is a kind of ballast reinforced track using the prepacked concrete technique. The most important thing to design the paved track is to optimize the track structure considering various conditions. Because construction environment is very limited, cost is expensive and it has very complicated behavior. On this paper, structural characteristics of the paved track are investigated using the 3D finite element analysis to verify the optimized structure of the CMP track.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.325-333
• /
• 2004

Since 1995, One of the NGIS(National Geographic Information System) projects, the underground utilities project has been finished in 2003. The 19 cities in korea for this project will use underground utilities management system using underground utilities database focusing on water and sewage system. However, special expert, technical and experience problem in computer environment has not been had in working department for water and sewage management and maintenance for each local government. The management and maintenance of underground utilities database by manual method is getting lowered a data quality of underground utilities database because of the data omitting, error in writing and securing of the lasted database. Therefore, in this study, Application test for field workers using a mobile tool and environment analysis of wireless communication in Korea and application test of GPS receiver for mobile tools had been processed and made a mobile working environment. The efficient management and maintenance method for underground utilities database has been developed an off- line method for modification and update of database about general work which has a high working frequency because of the limitation of wireless communication environment Also, the emergency working has been applied for on-line method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.12
• /
• pp.675-682
• /
• 2000

When a system is composed of multi-boards, an efficient bus arbitration method for the data transfer bus must be provided for guaranteeing proper operations. In this paper, a new test methodology is developed which is used for testing on-line bus arbitration. In the new test methodology, events that are occurred during bus arbitration are defined, and expected signals during fault-free bus arbitration are compared with the signals captured during on-line bus arbitration using boundary-scan cells. For this, a new test architecture is proposed which is efficient for the maintenance and the repair of multi-board systems. In addition, the new methodology can be used with off-line interconnect test using boundary-scan.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.82-87
• /
• 2010

A measurement system of contact force between overhead contact line and pantograph of train is developed which measures the contact force by using four sets of full-bridge strain gauges instead of load cells and accelerometers. The sensors are installed on the pan head of pantograph and the measured data from the sensors are transmitted to a server system in the train by way of wireless Lan. This configuration of the measuring system makes it easy to install on the trains without any alteration of train system. The measurement system is applied to KTX on the Kyungbu high speed line, and the measured contact force data shows good agreement with those measured by load cell and accelerometers. The waveform of the contact force between overhead contact line and pantograph contains essential information about their conditions. The proposed measurement system can probe any defects on overhead contact lines with train running at high speed, which will be a powerful solution for the maintenance of long-distance overhead contact lines.

• Journal of the Society of Disaster Information
• /
• v.14 no.3
• /
• pp.262-270
• /
• 2018

Purpose: This paper investigates and analyzes the loss and damage ratio of maintenance monitoring sensor in metropolitan and high speed railroad tunnel in Korea and abroad. Method: After 5~6 years from the installation, the maintenance monitoring sensor on metropolitan transit tunnels showed the loss and damage ratio from 14.2% to 14.8% in Seoul metro line no. 5, 6, 7, 9, and 13.9% in UK channel tunnel. Based on the result, 15% is thought to be a proper set for the elapsed years, which is 5 years from the installation. Results: The maintenance monitoring sensor on high speed railroad tunnels showed the loss and damage ratio of 60.9% in Ho-Nam high speed railroad on 1 stage after 3 ~ 5 years from the installation, which was approximately 4 times as high as that of Seoul metro line no. 5, 6, 7, 9. Conclusion: Kyung-Bu high speed railroad on 2 stage, after 8~10 years from the installation, showed the loss and damage ratio of 66.8%. Based on the result, it can be inferred that the loss and damage ratio increases drastically after 5~10 years from the installation. Therefore, it is necessary to study on the loss and damage ratio of long term elapsed years, especially more than 10 years from the installation.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.79-87
• /
• 2008

The major objective of this study is to investigate the effective maintenance system for the infrastructure on the conventional lines in which the tilting train runs. In order to the speed-up of conventional lines that have many curve lines, there needs a improvement construction of substructure such as the straight or double track work and so on. But in this case, it needs to have a plenty of the cost and the period. Therefore, the tilting train which provides the high-speed service effectively in curve tracks was developed. Besides, the efficiency prediction and the linear fitness of the existing conventional lines for a tiling train service were examined on the preceding study which was the development of track system innovation technology for speed-up of them. So, in this paper we propose the more effective maintenance method than the existing it in order to securing the high reliability and safety classified by the infrastructure, in analyzing foreign materials and the maintenance as well as the inspection cycle concerning domestic infrastructures of the track and the catenary etc. on the railway. And we look forward to playing a decisive role as reference material for the effective improvement of the existing maintenance about the infra on the conventional lines for the commercial service of the tilting train.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.1
• /
• pp.1-13
• /
• 2022

The Yongin Light Rail train was manufactured by Bombardier Transportation in Canada in 2008 and is a privately invested railway line that has been operating in Yongin-si, Gyeonggi-do, since 2013. When the frequency of train failure increases due to aging, and there is a delay in the delivery period of imported parts used in the Bombardier manufactured trains, timely vehicle maintenance may not be performed due to lack of parts. To solve this problem, it is necessary to build a 'vehicle parts maintenance demand forecasting system' that analyzes the accurate and actual maintenance demand annual based on the condition of vehicle parts. The full scope of analysis in this paper analyzes failure data from various angles after opening of Yongin light rail vehicle to analyze failure patterns for each part and identify replacement cycles according to possible failures and consumption of parts. Based on this study, it is expected that Yongin Light Rail's maintenance system will change from the existing time-based replacement (TBM) concept to the condition-based maintenance (CBM) concept. It is expected that this study will improve the efficiency of the Yongin Light Rail maintenance system and increase vehicle availability. This paper is a fundamental for establishing of a system for predicting the replacement timing of vehicle parts for Yongin Light Rail. It reports the results of data analysis on some vehicle parts.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1419-1424
• /
• 2004

Railway safety is based on a risk analysis and safety assessment for the whole railway system as human, train, electric, signaling, operation, maintenance and etc. Therefore in this study, after investigating the accidents happened in electric railway on Choongang line for 5 years, from '97 to '01, a Data-Base was made through a cause and result analysis. In consideration of economic loss and human resources damage, a risk assessment for electric railway was also performed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.