• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.385-390
• /
• 2007

Reliable flow measurement for dry season is very important to set up the in-stream flow exactly and total maximum daily load control program in the basin. Especially, in the points which tidal current effects are dominant because reliability of the low measurement decrease. The reliable measuring methods are needed. In this study, we analysis the water surface elevation difference of water surface elevation. Quantity relationship to consider tidal currents in these regions. It is known that tidal current effects from Nakdong river barrage are dominant in Samrangjin measuring station. We developed multiple regression equation with water surface elevation, quantity, and difference of water surface elevation and compared these results water measured rating curve. All of these regression equation including linear regression equation and log regression equation fits better measured data them existing water surface elevation quantity line and Among three equations, the log regression equation is best to represent the measured the rating curve in Samrangjin point. The log regression equation is useful method to obtain the quantity in the regions which tidal currents are dominant.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.42-47
• /
• 2014

The urban railway station is a structure that consumes a large amount of electric energy. Thus, the rationalization of using electric power is acutely demanded, but statistical data and design criteria that consider operating power load characteristics and structures, are very insufficiency. Therefore, this study investigated and analyzed that electricity consumption a year, characteristics, gross floor area of the station, structure, and etc, on the basis of Seoul metro station 1~4 line. Through regression analysis theory, we verified the overall features and the main tendency by analysis of specific parameter value(average, maximum, minimum, etc). The object of this study is the analysis about power density considering structure of the urban railway station, managing electric energy for the rationalization and setting a new standard of maintenance and construction.

• Korean Management Science Review
• /
• v.19 no.2
• /
• pp.191-204
• /
• 2002

As the portion of information systems (IS) budget to the total government budget becomes greater, the cost estimation of IS development and maintenance projects is recognized as one of the most important problems to be resolved for scientific and efficient management of IS budget. Since IS budget makes much effect on the delivery time, quality and productivity of IS projects, the exact cost estimation is also necessary for the successful accomplishment of IS projects. The primary concern in the cost estimation of IS projects is software cost estimation, which requires the measurement of the size of softwares. There are two methods for sizing software : line-of-code approach, function point model. In this paper, we propose a function-point-based model for estimating software cost. The proposed model is derived by collecting about fifty domestic IT projects in public sector and analyzing their relationship between cost drivers and development effort. Since the proposed model is developed by simplifying the function point model that can be used only when detailed user requirements are specified, it can be also applied at project planning and budgeting phase.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.2
• /
• pp.80-87
• /
• 1999

We propose the various Telemedicine applications using collaborative PACS environment. Traditionally, almost all medical images have been printed on radiological films. These films are expensive to produce and easy to misplace and usually only one copy exists, thus limiting the number of persons who have simultaneous access to the images. But the merit of this system including PACS(Picture Archiving and Communications System ) is very many which are small depository, low maintenance expense, good efficience(storage, speed) and good flexibility but the development costs is higher. This research has been done creating multimedia-based Telemedicine system for home PCs in network environment. Most of Telemedicine used hardware and exclusive line of high cost as CATV broadcasting technique. But this system will contribute to change the Home-PC for better use of collaborations among doctor and patients through various modes of interactions in cyberspace.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.798-803
• /
• 2006

The suspension elements like primary coil spring, yaw damper, body to body damper are core parts of high speed railway bogie and the faults relating to these elements are reported recently. Thus, this study is started to analyze the displacements characteristics of suspension elements of high speed railway rolling-stock for the purpose of preventing the faults and developing the maintenance technology for suspension elements like spring and dampers. For this purpose, we made a plan to measure the displacements of the primary coil spring, yaw damper and body to body damper in actual running condition. We developed the measurement device to measure the longitudinal displacement and angular displacement of suspension elements and installed this device to test suspension elements. Test to measure displacements of suspension elements is conducted in service line of high speed railway. The displacement data which is acquired from the test with actual vehicles was analyzed for its maximum displacement depending on the track sections. As a result of analysis, we obtained the displacement trends occurring with the sections and valuable results like maximum values and the displacement distribution.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1130-1136
• /
• 2015

Most equipments which are used to measure the switching power of the turnout depend on imports. As the data is limited to the measurements of the switching power, it is said that the equipment is insufficient to check the errors of the turnout and the electrical point machine, and set up the data for operating and maintenance. We studied not only measurements of the switching power of all turnout being used in domestic but also the development of the turnout performance total analysis equipment which can measure switching time, voltage, and current etc. at the same time. Considering that switching power of the turnout is the most basic element to check the irregularities of the turnout, in this paper, we analyzed the irregularities of the turnout through correlation between switching power of the turnout, voltage, and current of the electrical point machine. Also we performed test in commercial railway line where the turnout of MJ81 type and NS type was installed. And it is said that the test results can be used as basic technologies for ICT based real-time diagnosis and monitoring of the turnout.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.2
• /
• pp.21-28
• /
• 2007

This thesis analyzed the uniqueness of a toilet plane structure, centering on a case of Beautiful Public Toilet Construction Project under a project by Chungcheongnam-do and drew a conclusion as followings. Most of public toilets, constructed under a project by Chungcheongnam-do, were located in remains, tourist resorts, parks, and the outskirts of traditional markets. They were constructed at the selected location within an easy access of most user and plane structure was also designed so that the persons, in charge of management and maintenance, and the users could use them without difficulty. But some public toilets didn't establish the handicaps' toilet or made them difficult to sue due to location or size. The plane structure style was various such as a rectangular, stream line, or circle in accordance with location or building size. A circle-styled toilet offered a good view but didn't offer a good access or an effective space for users. In addition, when a handicapped person enters a toilet, he or she has to enter or go out of it through a sliding dor. So a constructor has to make progress of a work in accordance with this point.

• Korean Journal of Clinical Laboratory Science
• /
• v.43 no.3
• /
• pp.89-97
• /
• 2011

The Human Papilloma Virus (HPV) infection has been strongly associated with pathogenesis of uterine cervix carcinoma. HPV type 16, a causative agent of uterine cervix carcinoma, encodes the E6 and E7 oncogenes, expression of which is pivotal for malignant transformation and maintenance of malignant phenotypes. To develop a gene therapy for HPV-related carcinoma, We investigated the effect of E6 short-interfering RNA (E6 siRNA) on the expression of this oncogene and on the growth of HPV 16-related uterine cervix carcinoma cells. SiHa cells, a uterine cervix carcinoma cell line, which contain a single copy of HPV 16 integrated in the chromosome and express the E6 and E7 oncogenes. Before 24 hr of transfection, cells were seeded and transfected with control plasmid or E6 siRNA-expressing plasmid. The mRNA was analysed by reverse transcriptase polymerase chain reaction (RT-PCR). The cell growth rate was investigated by MTT method. The E6 mRNA level in SiHa cells was decreased in HPV 16 E6 siRNA-expression vector transfected cells and a decrease in the growth of these cells was also observed. From these results. it is evident that E6 siRNA played a role in suppression of growth of SiHa cells and has a fair chance as a candidate for gene specific therapy for HPV related uterine cervix carcinoma.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.1
• /
• pp.129-138
• /
• 2013

Water interruption is often caused by a rupture in the branch-like singular pipeline. This will cause critical complaints from household and may decrease public service quality. As an alternative of singular pipeline, additional parallel pipeline could be installed for sustainable water supply. This system is called double pipeline system and able to be utilized for water transmission line between treatment plant and distribution reservoir. Construction of double pipeline was thought to increase capital cost, which can be an issue to waterworks authorities. Reducing capital cost was possible by means of installing connectors between two parallel pipelines because of reduced diameter of each pipe. To obtain optimal design condition for connectors, it was necessary to compare water pressure according to accident location, to investigate flow according to connection pipe spacing, connection pipe diameter, and aging of pipe. Reliable and economical connection layouts were determined based on these results. The cost estimation for each design condition was carried out. Cost was approximately reduced by 20 ~ 30 % compared to the double pipeline without connections. In addition to this, connection between double pipelines could expect extra benefits for maintenance since the pipe could be repaired and rehabilitated without interruption.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.151-156
• /
• 2013

The experiment was done on cars travelling at the speeds of 20km/h, 60km/h and 100km/h using the performance testing mode for chassis dynamometer. In this experiment, the relativity between the secondary waveform coming from ignition coil and exhaust emissions were measured in case of cars with failures, in oxygen sensor, spark plugs. The following results obtained by analysis of the relativity between the secondary waveform and exhaust emissions. 1) When the oxygen sensor is failure, the average value of CO emission measured was 6.8 times higher than the standard CO emission value and the average value of HC emission measured was 2.3 times higher than the standard emission level. 2) When engine parts are in failure, more fuel enters the cylinder due to longer opening duration of injector, and it tended to make CO and HC emission values increase. 3) Combustion duration, the shape of flame propagation during spark line, and the size of the discharge-induced energy were the three main elements that directly cause variations in CO and HC emission values.