• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.299-302
• /
• 2000

RTD temperature sensor is a thermoresistor which uses the liner dependence of the resistance of the sensing material on the temperature, and has good stability and sensibility, so it can be used in highly precise temperature measurement. In this study RTD sensor was fabricated using Pt thin film. The Pt thin film was deposited on alumina using DC-Sputter, and annealed with various temperature. Through the experiments of XRD, AFM, 4-point probe, the surface structure of the thin film with annealing conditions and their effects on the electrical resistance were investigated. RTD with serpentine pattern was fabricated using Lift-off and resistance-temperature characteristics were studied.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.4
• /
• pp.10-17
• /
• 2006

Laboratory-scale two-dimensional aquifer physical model studies were conducted to assess the effect of air injection rate and air injection pattern on the removal of disel contaminated soil and groundwater by air/bio-sparging. The experimental results were represented that the optimal conditions in this experiment were as air injection rate of 1,000 ml/min and pulsed air injection pattern(15 min on/off). The results of the TPH reduction, DO consumption and $CO_2$ production indicate the effective biodegradation evidence of diesel. Based on our results, The minimal $O_2$ supply and pulsed air injection pattern could effectively enhance the diesel removal and the pulsing air injection had effect on oxygenation in this system. Thus, the cost of operating air/bio-sparging system will be reduced if optimal air injection rate and pulsed air injection pattern are applied to remediate contaminants.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.179-187
• /
• 1999

The computer pattern sewing machine is an automatic sewing machine that is controlled by an input pattern. Even a novice can run this machine for various tasks fast and reliably such as sewing a button, a belt ring and an airbag, etc. The pattern processing software, which is the main software of this machine, is for editing and modifying pattern data by online teaching or off-line editing, setting up parameters, and calculate a moving distance of working area on the x-y axes. In this paper we propose an algorithm to generate pattern data for sewing by simplifying image data. The pattern data are composed of outline data like dot, line, circle, arc, curve, etc. We need converting this data into sewing data which involve sewing parameter, moving distance of working are an the x-y axes, thread, spindle speed.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.148-162
• /
• 2017

Recently, the accomplishment of a system's quality attributes requires the negotiation of increasingly complex requirements, and this is because the contextual and developmental environments in which software is used has undergone broad changes. Nevertheless, with regard to most architectural designs, many of the proportions depend on the architect's intuition. Moreover, even if reusable architectural patterns are adapted to an architectural design, common schemas for the description of their use are nonexistent, and it is difficult to make a comparison for the selection of an appropriate systemic pattern because the focus of the schemas is not the user's perspective. To achieve a fast initial-design decision, this paper suggests new schemas that reduce the distance between the quality attribute requirements and the design by reinterpreting architectural patterns from the user's perspective. Also, based on the reconstructed pattern model that is derived from the use of the new schemas, an architectural-pattern recommendation method (APOQATo) for which the trade-off and the constraints that are due to the design decision are considered is provided as well as the advantages of the architectural pattern for which the quality attributes are satisfied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.925-928
• /
• 2004

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its use in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries. This paper was carried out some experiments and verifications of mechanism on FIB-CVD using SMI8800 made by Seiko. FIB-CVD has in fact proved to be commercially useful for repair processes because the beam can be focused down to 0.05$\mu\textrm{m}$ dimensions and below and because the same tool can be used to sputter off material with sub-micrometer precision simply by turning off the gas ambient. Recently the chemical vapour deposition induced ion beam has been required more deposition rate and accurate pattern because of trying to manufacture many micro and nano parts. Therefore this paper suggested the optimization parameters and discussed some mechanism of chemical vapour deposition induced ion beam on FIB-CVD for simple pattern.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.349-354
• /
• 2001

In this study, we investigated the effect of the impacting ang1e of particles, the scanning times and the stand-off distance on the surface roughness and the weight-loss rate of samples with no mask, and the wall profile and overetching of samples with different mask pattern in powder blasting of soda-lime glass. The varying parameters were the different impact angles between 50$^{\circ}$ and 90$^{\circ}$, scanning times of nozz1e up to 40 and the stand-off distances 70mm and 100mm. The widths of mask pattern were 0.2mm, 0.5mm and 1mm. The powder was alumina sharp particles, WA#600. The mass flow rate of powder during the erosion test was fixed constant at 175g/min and the blasting pressure of powder at 0.2MPa

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.251-256
• /
• 2003

This study focuses on the development of the conceptual criteria which could be applied to the speed-up strategy of urban rail operation. Down town segment or not, and peak hour or not are the criteria. The author suggests that in the case of down town segment and peak hour urban rail should take the all-stop pattern, if down town segment and off peak hour, then skip-stop pattern, if not-down town segment and peak hour, the A, B skip-stop, and if not-down town segment and off peak hour, the A, B, C skip-stop. If side lines, three rail, or 2 double lines, then express train operation is recommended in the peak hour. Then this study recommends speed-up strategies of each 8 urban lines.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.40.1-40.1
• /
• 2015

Off-axis reflective optical systems have attractive advantages relative to their on-axis or refractive counterparts, for example, zero chromatic aberration, no obstruction, and a wide field of view. For the efficient operation of off-axis reflective system, the surface accuracy of freeform mirrors should be higher than the order of wavelengths at which the reflective optical systems operate. Especially for applications in shorter wavelength regions, such as visible and ultraviolet, higher surface accuracy of freeform mirrors is required to minimize the light scattering. In this work, we propose the error compensation algorithm (ECA) for the correction of wavefront errors on freeform mirrors. The ECA converts a form error pattern into polynomial expression by fitting a least square method. The error pattern is measured by using an ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.). The measured data are fitted by two fitting models: Sag (Delta Z) data model and form (Z) data model. To evaluate fitting accuracy of these models, we compared the fitted error patterns with the measured error pattern.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.101-106
• /
• 2004

The process of removal of gummy proteinous material sericin from silk is commonly called as degumming loss or boil-off loss ratio. In the present study, the boil-off loss ratio in the cocoon shells of twelve multivoltine${\times}$bivoltine hybrids and their parents were analysed. Inheritance pattern of boil-off loss ratio was analysed in crosses involving high and low boil-off loss parents, F$_1$s, F$_2$s and back-crosses by parent off spring regression analysis. Heterosis and heterobeltiosis was also analysed for this character, Highly significant (P＞0.01) variations were observed in eight out of ten multivoltine and two out of five bivoltine parents indicating the presence of genetic variation in the expression of boil-off loss ratio. Among F$_1$ hybrids, ten hybrids expressed significant (P＞0.01) variations when compared with control hybrid PM${\times}$NB$_4$D$_2$. Significant negative heterosis was expressed in three multi ${\times}$ bi hybrids viz., BL67${\times}$CSR$_{101}$, 96A${\times}$CSR$_{19}$ and 96C${\times}$CSR$_{19}$, which is desirable for this character, whereas expression of heterobeltiosis was significant only with one hybrid, 96C${\times}$CSR$_{18}$ in desired direction. Studies on inheritance pattern showed that the character is heritable and contribution percentage of female and male in the ratio of 50.9: 49.1 and it appears that both the parents are influencing in the expression of boil-on loss ratio in silkworm. Based on the overall performance and evaluation by multiple trait evaluation index and also considering the expression of the boil-off loss ratio three hybrids vix., BL67 ${\times}$ CSR$_{101}$, 96A${\times}$CSR$_{19}$ and 96C${\times}$CSR$_{18}$ were found superior and recommended for commercial exploitation.n.ion.n.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.62-70
• /
• 2000

Intelligent vehicles are equipped with radar sensors for collision avoidance. We present a method of suppressing mutual interference among pulse-type radars, where all the radars are standardized. We developed a method of separating the true self-reflection from the false one by controlling the pulse emission of a radar in anorhogonal ON, OFF pattern. Interference signal identified in OFF-intervals is recorded to indicate the positions of the expected ghosts in ON-intervals. PFA and PM are derived for a radar system with I-Q demodulation scheme, where Gaussian noise alone is Rayleigh-distributed and Gaussian noise plus reflected radar pulse are Rician-distributed. The value of the threshold adaptively updated in order to prevent the deterioration of PM. In the experimental result, PFA decreases by an order of 10,000, when compared with the conventional M of N majority voting method.