• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.139-147
• /
• 2005

The lubricant impregnated MC nylon has good frictional properties, but its mechanical strength is inferior to steel for the mechanical elements. For the tribological application Nylon as gears, sliding bearings, cam and etc, the steel shafts are fitted in pre-heated nylon cylinder by a process of interference expansion fit and bonded by induction heating method. The joint shear strength of the two materials was measured by a universal test machine. From the study, the adhesive shear strength between these two materials was affected by the factors of the interference between nylon and steel, the size of nylon cylinder, knurl of steel shaft and inducting heating conditions. The most effective jointing conditions were analyzed and decided for the practical application in the industry.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.534-542
• /
• 2006

This paper presents results of frequency domain spectroscopy (FDS) measurements on oil-impregnated pressboard insulation, their analyses and use of the data for modeling high frequency response (FRA) of transformers. The dielectric responses were measured in a broad frequency range, i.e. from 0.1 mHz to 1 MHz, on model samples containing different amount of moisture. The responses were parameterized with terms representing dc conductivity, low frequency dispersion and Cole-Cole polarization mechanisms and they were thereafter used to model the FRA response of a three-phase transformer.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.576-577
• /
• 2006

This study was conducted to improve the durability and decrease the friction of the sintered bushing used in the joints of construction equipment. Research was carried out to examine the effects of the groove pattern on the inner surface. The following results were obtained: (1) The bushing (EK Bush) with grooves on the inner diameter showed increased durability as compared to a non-grooved bushing. (2) The helical-grooved bushing showed the least amount of wear; it was １/10 of the wear of the non-grooved bushing. (3) If the distance between grooves was decreased, then the coefficient of friction also decreased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.110-122
• /
• 1996

The n-3 family fatty acids containing ${\alpha}$-linolenic acid(18:3, ALA) have been known as physiological activation materials such as inhibitory effects on the incidence of hyper-tension, coronary heart disease and cancers as well as the control of senilc dementia. Although a lot of ALA(about $63\%$) are contained in perilla oil, it has not been commercialized yet because the purification technique of the ALA has not been well established. The procedure of purification of ALA from perilla oil was saponified with 1 N-KOH /ethanol and then saturated and low level unsaturated fatty acids were removed by low-temperature crystallization method. The concentrated unsaturated fatty acids (containing about $75\%$ ALA) went down through the silver nitrate-impregnated silica column chromatography for separation of high purity of ALA. The results obtained we Fraction B, C and D contained ALA more than $85.5\%$(recovery, >$88.9\%,\;95.4\%$(recovery, >$54.4\%$) and $99.9\%$(recovery, >$31.5\%$) in purity, respectively. Seed oil content of the tested varieties were ranged from 34.8 to $54.1\%$ with $45.3\%$ of varietal means. The major omega fatty acids contained in the oil were oleic acid(n-9) $15.2\%$, linoleic acid(n-6) $13.9\%$ and linolenic acid(n-3) $63.1\%$ in the mean value. Varietal variation of n-9, 6 and 3 fatty acids ranged of $9.5\~21.4\%,\;9.1\~20.4\%$ and $50.6\~70.5\%$ respectively. Unsaturated fatty acid were averaged $92.2\%$ of seed oil in fatty acid composition. The ratios of n-6 to n-3 ranged of $0.13\~0.34\%$($0.22\%$ in mean value). The highest n-3 fatty acid variety was Yecheonjong being $70.5\%$. The lowest variety in ratios of n-6 to n-3 was Goseongjong being $0.13\%$. Oil content showed positive correlation with stearic acid and linolenic acid, while the negative correlation with oil content and linoleic acid. On the other hand, A significant negative correlation were showed between linolnic acid and the ratios n-6/n-3 fatty acid, saturated fatty acid. Saturated fatty acid was highly correlated with unsaturated fatty acid negatively being $r= -0.723^{**}$.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.721-726
• /
• 2012

Thermoplastic polyurethane (TPU) elastomer is used as an encapsulant in undersea sonar devices. A new material for sonar encapsulant exhibiting better mechanical strength than TPU along with a lower swelling ratio for seawater and oil is required to prolong its application. TPU grafted silica nanoparticles (TPU-g-silica) were prepared and then they were melt mixed with TPU to fabricate desirable composites for underwater applications. The composite containing silica nanoparticles exhibited better tensile strength and lower swelling ratios in the seawater and oil than TPU regardless of the surface treatment of the silica particles. At fixed silica content in the composite, the TPU/TPU-g-silica composite exhibited better tensile strength and lower swelling ratio than the TPU composite with the pristine silica particles. Furthermore, the TPU/TPU-g-silica composite exhibited enhanced tensile strength as compared to TPU after being impregnated with oil.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.842-851
• /
• 2016

The objective of this study was to improve physical and mechanical properties of soft-inner part of oil palm trunk (S-OPT) after impregnation with phenol formaldehyde (PF) resin and densification by close system compression (CSC) method. Effect of different methods of PF resin impregnation (i.e., no vacuum-pressure, vacuum, and vacuum-pressure) was evaluated. The results showed that PF resin impregnation and CSC significantly improved the physical and mechanical properties of S-OPT up to: (1) 176% in density; (2) 309% in modulus of rupture (MOR); (3) 287% modulus of elasticity (MOE); and (4) 191% in the compressive strength. Physical and mechanical properties of S-OPT showed their best performances when PF resin impregnated with vacuum-pressure method as shown by higher weight gain, density, MOR, MOE, compressive strength, and lower recovery of set due to better penetration of PF resin into S-OPT. Combining PF resin impregnation and densification by CSC method could be a good method to improve physical and mechanical properties of S-OPT.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.675-682
• /
• 2005

Al containing mesoporous molecular sieve (Al-MMS) was synthesized by hydrolysis of $H_2SiF_6$ and $Al(NO_3)_3{\cdot}9H_2O$. The material obtained was characterized by XRD, $N_2$-physisorption. The specific surface area was $981m^2/g$, and the average pore size was uniformity $39{\AA}$. It was confirmed that the acidity of Al-MMS was milder than that of zeolite Y based on the results of $NH_3$-TPD. Active materials, Pt and Pd, were loaded on Al-MMS in order to examine the feasibility of using Al-MMS as a catalyst support in the hydrogenation of aromatic compounds included in the residue oil of a naphtha cracker. The hydrogenation activity of PtPd/Al-MMS has been studied by following the kinetics of the hydrogenation of naphthalene, and by comparing the kinetic parameters obtained with Pt and Pd catalysts supported on the other mesoporous material support and commercial conventional support materials. PtPd/Al-MMS catalyst shows the highest activity of hydrogenation and sulfur resistance. The high activity of PtPd/Al-MMS was confirmed again in the hydrogenation of PGO (pyrolized gas oil), which is residue oil obtained from a naphtha cracker. Therefore, PtPd/Al-MMS can be applied to the hydrogenation of aromatic compounds included in the residue oil of a commercial naphtha cracker commericially.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.361-364
• /
• 2004

EPA and DHA extracted from methyl esterified squid oil were purified by silver exchanged resin, silver nitrate-impregnated silica gel, silver exchanged zeolite, and silica gel column chromatography, among which column chromatography using mixture of silver exchanged resin and silica gel (10% by weight) showed the best result. By this simple purification method, EPA and DHA were concentrated from 12.5 to 27.9% (yield, 86,0%) and from 21.7 to 49.5% (yield, 87.3%), respectively. Silver exchanged resin had additional advantages of outstanding reusability and simple recovery of silver.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.62-68
• /
• 1997

현재 널리 보급되어 있는 볼베어링은 몇개의 볼에 의해 작동하기에 회전이 불균일하며 진동과 소음이 크다. 이는 고속에서 한계를 갖는 주된 원인이 되고 있다. 또한 그리스의 손실로 인한 수명의 단축이나, 유출된 그리스로 인한 손상은 제품의 내구성에 치명적인 결과를 초래한다. 더욱이 기존에 사용하는 소형 정밀 베어링은 전량 수입에 의존하고 있으며, 기술 선진국의 기술이전 회피로 개발이 어려우며, 수입물량도 확보하기 어려운 상황이다. 이를 극복하기 위한 하나의 방법이 볼과 그리스를 대신해서 유체의 압력을 이용한 유체동압베어링의 개발이다. 유체동압을 이용한 베어링의 장점은 그리스의 누유가 없고, 이로 인한 설계상의 제약이 없으며, 볼베어링으로는 불가능한 고속회전에 적합하고, 안전성이 뛰어나며 회전이 균일하여 제품의 신뢰성을 향상시킬 수 있다. 유체동압 함유소결함유베어링은 진동과 소음이 적고, 저렴하며 구조가 간단하고, 급유기를 필요로 하지 않는 자기윤활(self-lubrication)특성과 생산성 등 많은 장점을 가지고 그 사용범위가 점차 광범위하게 넓어지고 있지만, 저속상태에서의 유막형성, 고속상태에서 기름의 누유, 고하중상태에서 강도와 기공의 눌어붙음과 출발과 정지 시에 발생하는 두 금속간의 직접 접촉을 피할 수 없는 것과 같은 해결해야 하는 문제를 가지고 있다. 본 연구에서는 이러한 단점을 해결하기 위하여 유체동압 함유소결베어링이 마찰특성을 알아보고자 한다.

• Korean journal of applied entomology
• /
• v.47 no.3
• /
• pp.287-292
• /
• 2008

Repellent and acaricidal activities of eucalyptus oil, permethrin, and DEET against Leptotrombidium pallidum larvae, which are a vector transmitting tsutsugamushi disease, were evaluated under laboratory conditions using a filter paper impregnated method. The $LD_{50}$ values of eucalyptus oil and DEET were 0.025 and 0.018 $mg/cm^2$, respectively while that of permethrin was higher than 0.2 $mg/cm^2$. In the repellency test of these materials at 6.14 $mg/cm^2$, eucalyptus oil gave complete repellency, and the larvae crossed the treated zone killed. But permethrin showed 60% repellency at 9.20 $mg/cm^2$ and the mites croosed the zone were not killed. The percent repellency of DEET at 0.53 $mg/cm^2$ was 8.3 and 2.8 times higher than that of permethrin and eucalyptus oil, respectively. The acaricidal activities of emulsifiable concentrates-pump sprayers containing the eucalyptus oil as an active ingredient were assayed. The emulsifiable concentrates containing 1% and 3% eucalyptus oil showed weak mortality at 1 hour after treatment, while all ones containing more than 6% oil produced 100% activity against L. pallidum larvae. The mortality also increased as exposure time to the concentrates increase. These results suggest that the potential of eucalyptus oil highly expected to be used as a control or repellent agent against L. pallidum larvae may be very high.