• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.330-338
• /
• 2015

The influences of fluorescence, scattering, and flocculation in turbid material by light scattering of N-propyl-N,N-dimethylethanolamine, fluorescence agent and absorption agent were interpreted for the scattered fluorescence intensity and wavelength. They have been studied the molecular properties by the spectroscopy of laser induced fluorescence (LIF) and flocculation. The effects of optical properties in scattering media have been found by the optical parameters(${\mu}_s$, ${\mu}_a$, ${\mu}_t$). Flocculation is an important step in many solid-liquid separation processes and is widely used. When two particles approach each other, interactions of several colloid particles can come into play which may have major effect on the flocculation and LIF process. The values of scattering coefficient ${\mu}_s$ are large by means of the increasing scattering of scatterer, The values have been found that the slope decays exponentially as a function of concentration from laser source to detector by our experimental result. It may also aid in designing the best model for oil chemistry, bio-pharmaceutical, laser medicine and application of medical engineering on LIF and coagulation in particle transport mode.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.114-121
• /
• 2002

Alkali metal compounds existed in original coal or sorbents are exhausted as vapor or small particle at the outlet of combustor when operating PFBC power plant. These compounds can be removed with dust removal equipment, but total generation efficiency will be decreased because of lower operating temperature of dust removal equipment. Alkali metal contained in vapor phase is initially deposited onto turbine blade results in serious corrosion. The concentration of alkali vapor in the PFBC flue gas is 20∼40 ppm which is dependent on mineral characteristics and composition as well as operating condition of PFBC. However, the allowance limit of alkali metal vapor is assigned as less than 50 ppb for gas turbine when coal or oil is used as fuel. Therefore, alkali metal vapor in PFBC or IGCC process should be removed by solid sorbents to prevent corrosion of turbine blade and improve plant efficiency. In the present investigation, powder of Bauxite, Kaolinite and Limestone is used in the preparation of cylinder-type pellet which is inserted into the pressurized alkali removal reactor for the alkali absorption experiment. Experimental results showed that the alkali removal efficiency in the order of Bauxite, Kaolinite and Limestone. Alkali vapor removal efficiency is related with reaction temperature, porosity of pellet and alkali vapor concentration of flue gas.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.26-30
• /
• 1994

The purpose of this study was to investigate the effects of heating times of soy protein isolate(SPI) and mixing ratio of coagulants mixture on water holding capacity(WHC) and oil absorption capacity (OAC) of SPI, texture properties and yield of tofu. The effect of heating at $100^{\circ}C$ on the amounts of coagulants required for coagulation showed that the amounts of $CaCl_{2},\;MgCl_{2}$ and GDL decreased as the heating time extended to $6{\sim}9$ minutes while $CaSO_{2}$ was changed little. The tofu yield showed maximum for the tofu prepared by 6 minutes boiling and coagulation with $CaSO_{4}$. The WHC of SPI was significantly reduced by heating at $100^{\circ}C$ while OAC was rather increased until 9 minutes of heating. The textural properties of SPI tofu coagulated with mixed coagulants$(CaSO_{4}-GDL,\;CaSO_{4}-CaCl_{2},\;CaCl_2-GDL)$ showed that softer tofu was obtained as the ratio of $CaSO_{2}$ increased and harder tofu as the ratio of $CaCl_{2}$ and GDL increased. The maximum and minimum tofu yields were prepared from 100% of $CaSO_{2}$ and 100% of GDL, respectively. Organoleptic properties showed that more uniform and tender tofu were obtained with higher portion of $CaSO_{2}$ in the mixed coagulants and higher intensity of sourness and bitterness were scored as the GDL and $CaCl_{2}$ added more.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.178-186
• /
• 2020

Verdigris is a traditional artificial pigment reported on old research papers and according to the methods mentioned in the literature, it is manufactured by the corrosion of copper or copper alloys using vinegar and by further scraping the generated rust. Since the Three Kingdoms Period, various household products with copper alloys, such as bronze and brass, have been used, and pigment analysis of these cultural heritage items has revealed the presence of tin, zinc, lead, and copper in green pigments. Based on these data, five types of verdigris were prepared from copper and copper alloys, and analyzed. the analysis results revealed a bluish green pigmentation, and the chromaticity, particle shape, and oil absorption quantity of each verdigris differed based on the type of copper alloy used in its preparation. The main components of verdigris are Cu, Sn, Zn and Pb, and their proportions depended on the type of copper alloy used during manufacturing. However, the main constituent mineral of the pigments is the same as 'hoganite[Cu(CH₃COO)₂·H₂O]', regardless of the copper alloy used. The result of accelerated weathering test for stability evaluation revealed that verdigris was discolored rapidly, thereby indicating that its stability was low, in particular, the pigments comprising lead presented relatively lower stability.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.187-196
• /
• 2020

In this study, we tried to reproduce some of the cosmetics from the Joseon period based on the previous analysis of the cosmetics excavated from the tomb of Princess Hwahyup. The two cosmetic powders, the white powder consisting of lead(II) carbonate and talc and the cinnabar-based red powder, were reproduced according to the records from the 6th to the 19th centuries. We also studied the degradation profiles of these reproduced samples by comparison of XRD patterns. Basic lead carbonate of the reproduced white powder turned into lead(II) carbonate, while the reproduced red powder showed different crystalline structure from the excavated cosmetics even after the degradation. Results of the evaluation tests showed that these reproduced cosmetics fell short of the standards set for the modern-day cosmetics, but based on their mixing ratio, the spreadability and oil absorption capacity of some samples of the reproduced white powder were found to be similar to those of the modern cosmetics.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2015

This study were conducted the particle-size analysis on 57 blue pigments to understand the step distribution characteristics of blue pigments made out of Azurite by using Malvern's Mastersizer 2000. As the result, most of the conventional blue pigments in Korea, Japan, and Chinese showed good granularity step separation except for few, and the smaller the particle, the more the Span value increased and the wider the granularity distribution range. On the basis of Friedman and Sanders's Grain size, most of the pigments were sand size to silt size. 72.2% of B-100 was clay size and 2.5% of A-14 was gravel size. Even the same components can differ by the grain size directly affecting the important property such as color formation, oil absorption, specific gravity, usability, etc. so the information about the granularity distribution would be used for basic data to deal with natural pigments.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.27-33
• /
• 2017

Up to now, better convenience and portability were important factors in the development of the cosmetics and achieved by immersing low viscosity makeup water-in-oil (W/O) emulsion into the impregnation material. Conventionally, polyurethane sponges having porous network structures and hard textures have been dominantly used. It has an advantage of easy to manufacture because of its good impregnation property due to its structural characteristics. However, it releases emulsion too much at first use, and shows unexpected dramatic decline during the period of usage. In this study, we studied on makeup W/O emulsion with various features and developed the new foaming sponge, which showed excellent formability and proper absorption and discharge ability of cosmetic composition through the combination of natural rubber (NR) and styrene butadiene rubber (SBR). This impregnation material is characterized by the softness of elasticity like a rubber, high elongation and uniform output. We confirmed that this material can be used to develop makeup products using various oils depending on polarity and controlling the viscosity of the makeup W/O emulsion. Thus, it is concluded that these results provide valuable information in developing new cosmetics impregnation materials.

• Culinary science and hospitality research
• /
• v.20 no.6
• /
• pp.56-68
• /
• 2014

Yam Yackwa (YP) was made by addition of yam power (15%) into flour. Depending on extension of storage time, lightness and redness of YP were increased. Yellowness of YP was decreasing until 3 days and increased from 9 days of storage. However, the yellowness of Yackwa without Yam powder (Non-YP) was increasing until 3 days and decreased from 6 days of storage. Hardness, gumminess, and chewiness of YP were improved compared to Non-YP. It means that the addition of yam power makes Yackwa soft. Oil absorption of Non-YP was low. Acid value and peroxide value of YP were 1.57 and 19.04, respectively. Moisture contents, crude ash, crude fat, crude protein, and carbohydrate of YP were $2.55{\pm}0.08%$, $0.71{\pm}0.01%$, $6.11{\pm}0.06%$, $15.97{\pm}1.40%$, and $64.66{\pm}0.09%$, respectively.

• Korean Journal of Ichthyology
• /
• v.10 no.1
• /
• pp.1-10
• /
• 1998

The early history of Korean mandarin fish, Siniperca scherzeri was studied to obtain some information required in aquaculture and reinforcement of natural population. During the period from June 1996 to July 1997, the mature adults of Siniperca scherzeri were collected from the middle Soyang Lake at Puksan - myon, Chunchon - shi, Kangwon - do, Korea. The eggs from females were obtained by injecting HCG or/and GnRH - a and fertilized by dry method in the laboratory. The fertilized eggs, measuring 1.70~2.10 mm in diameter and expanded to 2.20~2.66mm after absorption of water, were globosity, light orange yellow, separative, submergence and had one large oil globules of 0.5~0.7 mm. The blastodisc was formed in 1 hour and cleavage started in 1 hour 30 min. after fertilization, and the intervals of each stage of cleavage was about 50 min. at the water temperature of $21{\sim}24^{\circ}C$. Hatching occurred 131 hours 30 min. after fertilization and newly hatched larvae were 5.86~6.85 mm in total length(TL) and numerous stellate melanophores were distributed on the yolk and abdomen of caudal peduncle. The yolk was almost absorbed and the teeth development. 3 days after hatching, at 6.98~7.60 mm TL. The head spines and the teeth were largely developed and all fins were completely formed and became postlarva stage 15 days after hatching, at 10.10~12.90 mm TL. The body shape and the color pattern were similar to adult, 25 days after hatching, at 15.3~23.8 mm TL. In 5 months after hatching were reached at 154.10~175.02 mm TL and 49.32~82.67 g in body weight.

• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.133-139
• /
• 2017

This study investigated the effects of NaCl and jasmonic acid (JA) on the growth and physiological responses of spearmint (Mentha spicata L.). Spearmint was hydroponically grown for 3 weeks in modified Hoagland solution containing 0 (untreated control), JA ($20{\mu}M$ JA pretreatment), NaCl (50 mM NaCl treatment) and JA + NaCl ($20{\mu}M$ JA pretreatment + 50 mM NaCl treatment). Growth characteristics, chlorophyll, vitamin C, proline contents, DPPH scavenging activity and inorganic ion contents were evaluated. As a results, there were significant decreases in the plant height, leaf length, leaf width, and fresh weight of plants, treated with NaCl compared with control. On the other hand, the dry matters of shoot and root treated with JA + NaCl combination were better than control or NaCl treatment. Chlorophyll a and b contents in JA treatment was the highest. Vitamin C, antioxidant activity, and proline content in shoot were increased in NaCl treatment which showed low level of growth rate. The K/Na ratio, which is known to indirectly reflect the balance of ion uptake, was higher in a single treatment of JA than the control group, while lower in salt treatment (NaCl and JA + NaCl) because of high $Na^+$ absorption. In conclusion, these results showed that moderate stress treatment such as low level salt treatment and plant growth regulator jasmonic acid (JA) application would be potential strategies to improve the quality of spearmint by inducing the accumulation of secondary metabolites containing high antioxidant activity and essential oil.