• Economic and Environmental Geology
• /
• v.13 no.3
• /
• pp.185-192
• /
• 1980

The rocks exposed in the investigation area are andesite of Late Cretaceous age, and syenite and aplitic granite of Bulgugsa Series of Early Cretaceous Period, which is intruded in the older andesitic rock. The strike and dip of major joint is $N10^{\circ}$ to $60^{\circ}E$, and $70^{\circ}SE$ to vertical respectively. According to seismic exploration, lower velocity zone, deemed to be fractured and/or crushed zone, is appeared along the gully center of east flank of the area. Test drilling shows that andesite bedrock is mostly very hard, massive, and very fine to medium grained and has almost 100 percent RQD and core recovery. In comparision with andesitic bedrock, intruded syenite cores show that it is highly crush especially at the depth from 55m to 63m.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.11-17
• /
• 2013

The recycling technology of carbon residue produced from the process of oil recovery in waste tire pyrolysis is significant in environmental and economical aspects. This study was done to figure out the recycling possibility of carbon residue to activated carbon. For this, the characteristics of the carbon residue obtained from the commercial pyrolysis process of waste tire were studied. Also, the variation of pore structure of carbon residue was studied after 1 hour of carbonization at $600^{\circ}C$ and $800^{\circ}C$ and 3 hours of activation at $950^{\circ}C$. The specific surface area of the carbon residue was $8.0m^2/g$ and it increased to $548.3m^2/g$ after carbonization and activation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.239-245
• /
• 2016

In the midst of continuing international recession, the rate of maritime traffic and marine leisure markets are consistently growing. The Republic of Korea controls the marine traffic volume through vessel traffic centers and various other management facilities. Nevertheless, the continuous growth and complexity of marine traffic is resulting in repeated occurrences of marine accidents. Recovery is very difficult in cases of human injuries or deaths caused by marine accidents due to its nature, and the scale of marine accidents is also becoming greater with advanced ship building technologies. Passenger ships, oil tankers, and other such vessels used for specific purposes requires a more detailed navigational status surveillance and analysis, and numerous research has been conducted with an objective for monitoring such special purpose vessels. However, the data elements transmitted from the ocean to the shore station are limited to AIS and ARPA. We are implementing IoT ship sensor collection and a syncing system capable of transmitting various ship sensing data to the shore station, and also proposing a Safe Navigation Status Analysis System utilizing the collected data.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.

• Journal of Yeungnam Medical Science
• /
• v.8 no.2
• /
• pp.84-94
• /
• 1991

The purpose of this study was to evaluate the influence of high does carbon tetrachloride($CCl_4$) on the hepatotoxic effect of dimethylnitrosamine(DMN) which induces acute hemorrhagic necrosis in liver. Rats were injected intraperitoneally DMN dissolved in physiologic saline by a dose of 40mg/kg. For changes related to $CCl_4$ pretreatment, rats were injected intraperitoneally $CCl_4$ dissolved in olive oil by a dose of 0.4mg/kg, and then injected DMN. The livers were extracted from the rats 3, 6, 12, 24, 48, 72, and 120 hours after $CCl_4$ and/or DMN injection. Liver tissues were examined with light and electron microscopes. The results were summarized as follows ; Light microscopic findings : Severe centrilobular hemorrhagic necrosis developed from 12 hours after injection of DMN and continued to 120 hours. On injection of DMN after $CCl_4$ pretreatment, Massive necrosis occurred early. But active regenerative changes were produced in 24 hours. In 120 hours, the liver recovered in almost normal appearance. The degree of necrosis in pretreated group was similar to that in DMN injection only, and the time of recovery was faster in preteated group. Electron microscopic findings ; The early change was mainly disorganization of RER in DMN injection, and clumping and vesicular dilatation of ER in injection of $CCl_4$. In pretreatment group the early change was similar in appearance with $CCl_4$ group, but severer in degree. According to the results, it was revealed that acute toxic effect of DMN was recovered more rapidly in pretreatment group. Thus it was suggested that $CCl_4$ had protective effect in DMN hepatotoxicity.

• Applied Chemistry for Engineering
• /
• v.25 no.2
• /
• pp.121-133
• /
• 2014

Block copolymers including ABA triblock architectures are useful as thermoplastic elastomers and toughened plastics depending on the relative glassy and rubbery content. These materials can be blended with other polymers and utilized as additives, toughening agents, and compatibilizers. Most of commercially available block copolymers are derived from petroleum. Renewable alternatives are attractive considering the finite supply of fossil resources on earth and the overall economic and environmental expenses involved in the recovery and use of oil. Furthermore, tomorrow's sustainable materials are demanding the design and implementation with programmed end-of-life. The present review focuses on the preparation and evaluation of new classes of renewable ABA triblock copolymers and also emphasizes on the use of carbohydrate-derived poly(lactide) or plant-based poly(olefins) having a high glass transition temperature and/or high melting temperature for the hard phase in addition to the use of bio-based amorphous hydrocarbon polymers with a low glass transition temperature for the soft components. The combination of multiple controlled polymerizations has proven to be a powerful approach. Precision-controlled synthesis of these hybrid macromolecules has led to the development of new elastomers and tough plastics offering renewability, biodegradability, and high performance.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.304-309
• /
• 2007

In this study, the "Multi Well Plate-type cell Apparatus" was designed and setup for performing the producing experiments of methane hydrate by depressurization, heat stimulating methods. In order to characterizing the producing mechanism of hydrate through porous materials, the experiments for various producing methods have been conducted with the aid of the apparatus which has high permeability. In the experimental result of depressurization method, the pressure is temporarily increased unlikely conventional gas reservoir due to the sourcing effect of hydrate dissociation in the pore. Meanwhile, the temperature is decreased because of the endothermic reaction while hydrate is dissociated. In the experimental results of heat stimulating method, the dissociation in depressurization method is more slowly processed than that in thermal method, and hence, its gas production is lower. In the case of production right after heating, hydrate is dissociated only near injecting point and the permeability becomes greater at that area only. It infers that the more gas is produced during relatively earlier producing period. Since then, the hydrate is more slowly dissociated than the case of production after heating and soaking. This time, the performances of pressure and production obtained by thermal method have been analyzed in order to investigate the effect of soaking time on gas recovery. As a result, the gas recoveries in the case of 2 min and 4 min soaking are higher than case in 6 min soaking. This is reason that hydrate is reformed due to the decrease of temperature. It is expected that the experimental results obtained in this work may be more clearly explained by utilizing the lower permeable porous system with the greater hydrate saturation.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.643-659
• /
• 2022

Geologic sequestration technologies such as CCS (carbon capture and storage), EGS (enhanced geothermal systems), and EOR (enhanced oil recovery) have been widely implemented in recent years, prompting evaluation of the mechanical stability of storage sites. As fluid injection can stimulate mechanical instability in storage layers by perturbing the stress state and pore pressure, poroelastic models considering various injection scenarios are required. In this study, we calculate the pore pressure, stress distribution, and vertical displacement along a surface using commercial finite element software (COMSOL); fault slips are subsequently simulated using PyLith, an open-source finite element software. The displacement fields, are obtained from PyLith is transferred back to COMSOL to determine changes in coseismic stresses and surface displacements. Our sequential use of COMSOL-PyLith-COMSOL for poroelastic modeling of fluid-injection and induced-earthquakes reveals large variations of pore pressure, vertical displacement, and Coulomb failure stress change during injection periods. On the other hand, the residual stress diffuses into the remote field after injection stops. This flow pattern suggests the necessity of numerical modeling and long-term monitoring, even after injection has stopped. We found that the time at which the Coulomb failure stress reaches the critical point greatly varies with the hydraulic and poroelastic properties (e.g., permeability and Biot-Willis coefficient) of the fault and injection layer. We suggest that an understanding of the detailed physical properties of the surrounding layer is important in selecting the injection site. Our numerical results showing the surface displacement and deviatoric stress distribution with different amounts of fault slip highlight the need to test more variable fault slip scenarios.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.81-81
• /
• 2020

Pneumonia is infection of air sacs in lungs by bacteria, viruses, fungi and abnormal atmosphere condition. That causes to inflammation and fills up with pus and fulid in air sacs. The symptoms of pneumonia are heavy cough, fever, shortness and rapid respiration and sputum with blood. Also, that remains sequela after the recovery. Thymus quinquecostatus (TQ) has a strong antibacterial effect. That has been used a natural medicine for bronchitis, asthma and nervous inflammation. In this study evaluated anti-inflammatory effects of TQ on IFN (interferon)-γ/TNF (tumor necrosis factor)-α (20 ng/ml) stimulation. MRC-5 cells were seeded at 1 × 10⁵ cells/well in a 24-well plate and stabilized overnight at 37℃. The cells were treated with various concentrations of TQ extracts (DW, 30, 50, 70, 95% EtOH, 0.1~100 mg/ml) for 4h, Subsequently IFN-γ/TNF-α (20 ng/ml) was added to each well and incubated over 12h. the production of inflammatory cytokines were measured by Enzyme-linked immunosorbentassay(ELISA) method. The absorbance was measured at 450 nm using microplate reader. The treatment with TQ extract at dose of 0.1 to 100 mg/ml did not show cytotoxicity in MRC-5 cells (showed cytotoxicity at 95% EtOH 100 mg/ml). The results demonstrated that stimulation of TNF-α/IFN-γ significantly increased the production of inflammatory mediators in the MRC-5 cells compared with unstimulated cells. By contrast, treatment with TQ extreats doses of 0.001 to 10 mM significantly suppressed the production of IL-6 and IL-8. Especially. The higher percent of ethyl alcohol extracts suppressed the production of inflammatory cytokines. This results are considered that essential oil of TQ is extracted according to ethyl alcohol percent. Therefore, TQ has potential to mitigate pulmonary disease that can be used a medicine for pneumonia

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.829-846
• /
• 2015

This study was conducted to determine the effects of organic fertilization rates on the nutrient accumulation and recovery in radish (Raphanus sativus L.) as well as growth and yield of radish in Jeju island. An understanding the relationships between organic fertilization rate, crop nutrient recovery and crop yield can assist in making organic fertilizer recommendation which balances crop value and environmental risk in organic cultivation. Nitrogen (T-N), phosphate ($P_2O_5$) and potassium ($K_2O$) were applied at 0, 115-35-40, 230-70-80 (standard application rate), 460-140-160, 230-200-100 (recommended application rate) and 158-53-35 kg/ha (customary application rate), respectively as the broadcast application of mixed organic fertilizer (N 4.5% - $P_2O_5$ 1.5% - $K_2O$ 1%) in combination with langbeinite ($K_2O$ 22%), 100% at sowing period. The organic fertilizer was made of organic materials like oil cakes. Total yield of radish, as fresh weight of roots, increased with increasing organic fertilizer doses to a maximum at rate of standard or soil-testing application. Nitrogen, phosphate and potassium accumulations of radish increased curvilinearly with increasing organic fertilization rate to a maximum at rate of N 460 - $P_2O_5$ 140 - $K_2O$ 160 kg/ha. However, nitrogen, phosphate and potassium use efficiency of applied organic fertilizer decreased curvilinearly or linearly with increasing organic fertilization rate. Application of organic fertilizer in combination with langbeinite (as a potassium source) had significant effect on the yield of radish. Organic fertilization on a basis of standard or soil-testing application rate is recommended for maximun radish yield in organic cultivation.