• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.269-273
• /
• 2007

Purpose: High-pressure injection(HPI) injury is an injury caused by accidental injection of substances by industrial equipment. HPI injury of the hand is a serious injury that can be potentially devastating. There have been a number of publications on the results of its treatment and its functional outcome of these hands. Unfortunately, the clinical outcomes were unsatisfactory following an initial treatment approach of digital expression of the injection material, elevation, soaks, dressing changes, and antibiotics. Methods: A 43-year-old right handed man sustained a high pressure injection injury to the tip of the left index finger. The injected material was industrial paint thinner. Tissue necrosis was noted at the pulp of the finger. Several debridements and irrigation were required. A pedicled chest flap transfer was performed on the eighteenth day after injury as the dorsal nail complex remained viable. This is a retrospective review of our experience with high-pressure finger injection injury caused by paint. A literature review, retrospective chart and radiologic review were presented. Results: Follow-up length was about 1 year. The injuried hand was left nondominant hand, the index. Patient complaints were cold intolerance, paresthesia, contact pain, and impairment of activities of daily living. Conclusion: The outcome of high-pressure injection injuries of the hand is affected by many factors. The time between injury and operative treatment has been regarded as a key determinant by a number of authors. The nature of the injected material is probably more important. It has been noted by many authors that injuries with paints have a worse outcome than those with oil or grease. This study confirms the fact that high-pressure injection injury caused by paint thinner to the hand is a significant problem. Virtually a patient suffers sequelae of this injury. The injury has significant repercussions for future function and reintegration into the work force.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.1
• /
• pp.40-49
• /
• 2023

Objectives: The handling of carcinogenic, mutagenic or reproductive toxic (CMR) materials in paint-related products used by automobile maintenance companies in Busan was investigated and its characteristics were analyzed. Methods: MSDS for paint-related chemical products used by automobile repair companies in Busan were collected and the manufacturers, product uses, names of chemical substances in each component, CAS numbers, content, and more were listed. Results: As a result of collecting MSDS on 4,800 kinds of products handled in the painting process of automobile repair companies in Busan and comparing them with the latest toxic information database, 60 out of a total of 438 substances were found as CMR materials. Seven carcinogens (1A), including quartz, benzene, formaldehyde, and hexavalent chromium, were present. Two reproductive toxic 1A substances were included: hexavalent chromium in paint pigments and lead. Conclusions: Most of the products (95.5%) were found to contain at least of one CMR component, so it was judged that a study on exposure assessment of CMR substances by automobile maintenance workers is needed in the future.

• Journal of architectural history
• /
• v.31 no.4
• /
• pp.45-56
• /
• 2022

Gachiljang(假漆匠), along with Jinchiljang(眞漆匠), is an important craftsman who cannot be left out during the finishing process of wooden furniture and wooden buildings during the Joseon Dynasty. The current definition of Gachiljang does not properly explain the nature and role of Gachiljang. In many related terminology dictionaries, Gachiljang is defined as "artisan who dose the base paintwork of Dancheong." But an analysis of the Joseon Dynasty's Uigwe(儀軌) shows that Gachiljang appears frequently in works that are not related to Dancheong at all. Therefore the current definition seems to be inaccurate and need to be revised. Gachiljang is a name that contrasts with Jinchiljang, and he makes and paints Myongyu(明油). Just as Jinchiljang uses not only lacquer but also various pigments to paint colorful lacquer, Gachiljang also uses various pigments to decorate buildings or furniture in a fancy way and then finishs with a transparent paint. Even in the Dancheong(丹靑) work of the building, all the base painting and finish coating work will be in charge of Gachiljang, except for the paintings performed by the Whawon(畫員) or the Whasa(畫師).

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.1-7
• /
• 2017

Currently, flammable liquids account for more than 87 wt% of the hazardous materials in circulation in Korea, and paint products are the most commonly used mixed hazardous materials. Therefore, one of the most urgent and important issues is that we have to secure the safety for manufacturing, storage and transport of paint products. In this study we investigated and analyzed the domestic hazardous materials safety management method, the international GHS test method and so forth. We tested risks for a variety of oil paints and found a relation between the results. Furthermore, the risk test method and criteria adapted for domestic situation was presented. Paints were classified as hazardous or non-hazardous according to the results of the flash point test, the amount of flammable liquid or the UN-combustion persistence test. It was revealed from the test results of 6 kind of oil-based paints using different resins that they were hazardous materials with very high risks and belonged to the Category 1 or the Category 2.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.244-249
• /
• 2004

In this paper, shielding effectiveness(SE) of the shielding paint of electromagnetic(EM) waves was investigated with actual experiments. The shielding paint used in this study were made of powder of conductive materials - Ag, Cu, Al, Sn, Ni. Cr, Graphite and Charcoal etc. with a solubility in oil and water. Also, the paper was used as a base sheet. The experiment was carried out by using a shielding evaluator(Shielding box) TR17302 with an ADVANTEST spectrum analyzer, model R3361C. It was found from the experimental results that silver, copper, nickel were good candidates as a shielding material against the EM waves with increasing the SE as the composite was laminated. The characteristics of the SE against the EM waves depended on a mode of preparation of specimen. The effects of density of particles on the SE were studied about the EM shielding paint. The SE strongly depended on the electric resistance by density of painting particles. SE increased as the density of particles was increasing.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.61-66
• /
• 2011

The purpose of this paper is to design a hydraulic actuator to operate under high pressure conditions. The flow characteristics under design conditions of hydraulic actuator were numerically conducted by commercial fluid dynamic code(ANSYS CFX V11). The numerical analysis was performed by transient technique according to the variation of stroke times, which was changed from 0 to 1 second by interval of 0.01. Turbulence model, $k-\omega$ SST was selected to secure more accurate prediction of hydraulic oil flow. The ICEM-CFD 11 and CFXMesher, reliable grid generation software was also adapted to secure high quality grid necessary for the reliable analysis. According to the simulation results, the flow rate which was supplied to the hydraulic actuator was 30.4l/min. These results are in good agreement with design results within 3.5% error.

• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.63-71
• /
• 2016

Background: Construction painters have not been studied well in terms of their hazards exposure. The objective of this study was to evaluate the exposure levels of total volatile organic compounds (TVOCs) for painters in the construction industry. Methods: Activity-specific personal air samplings were carried out in three waterproofing activities [polyurethane (PU), asphalt, and cement mortar] and three painting activities (epoxy, oil based, and water based) by using organic-vapor-monitor passive-sampling devices. Gas chromatograph with flame ionization detector could be used for identifying and quantifying individual organic chemicals. The levels of TVOCs, by summing up 15 targeted substances, were expressed in exposure-index (EI) values. Results: As arithmetic means in the order of concentration levels, the EIs of TVOCs in waterproofing works were 10.77, 2.42, 1.78, 1.68, 0.47, 0.07, and none detected (ND) for indoor PU-primer task, outdoor PU-primer task, outdoor PU-resin task, indoor PU-resin task, asphalt-primer task, asphalt-adhesive task, and cement-mortar task, respectively. The highest EI for painting works was 5.61 for indoor epoxyprimer task, followed by indoor epoxy-resin task (2.03), outdoor oil-based-spray-paint task (1.65), outdoor water-based-paint task (0.66), and indoor oil-based-paint task (0.15). Assuming that the operations were carried out continuously for 8 hours without breaks and by using the arithmetic means of EIs for each of the 12 tasks in this study, 58.3% (7 out of 12) exceeded the exposure limit of 100% (EI > 1.0), while 8.3% (1 out of 12) was in 50e100% of exposure limit (0.5 > EI > 1.0), and 4 tasks out of 12 were located in less than 50% of the limit range (EI < 0.5). Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.701-711
• /
• 2021

This study identifies the structure and material characteristics of the mural paintings in Daeungjeon at Ssanggyesa temple in Jindo by conducting scientific research and analysis including microscope examination, SEM-EDS, XRD, particle size analysis, and others. According to the analyses, the murals were considered to be of a typical soil mural style for Korean Buddhist murals, given that the walls were made of sand and soil and the murals had layers consisting of wall layers and a finishing layer. However, some finishing layer used calcite, while some ground layer used zinc white beneath the thick paint. In addition, there were similar features to those found on the surfaces of oil paintings such as cracks along with the paint layer, high gloss on surfaces, and thick brush strokes in many areas. It was found that the walls on which the murals were painted were made of soil but that the paint layer was created based on the oil painting technique using drying oil. It determined that the murals were painted in a unique painting style that is rarely found in other typical Buddhist murals in Korea.

• Archives of Reconstructive Microsurgery
• /
• v.24 no.2
• /
• pp.75-78
• /
• 2015

High-pressure (HP) injection injury to the upper extremity often causes a very serious clinical problem, leading to poor outcomes, including amputation, so that a true surgical emergency is required. The outcomes can be improved with emergent wide surgical debridement. However the diagnosis of these injuries is often delayed due to underestimated evaluation at first appearance and lack of common knowledge of the seriousness of this injury. The type and pressure of the infecting material is an important factor in prognosis and organic solvents infected pressure injury can cause poor outcome and increased amputation rate. In this case, we report on reconstruction of HP oil-based paint injection injuries of the finger using T-shaped pedicles and multiple venous anastomoses. In this concept, arterial flow can be maintained by the reverse flow of distal anastomosis when there is difficulty with the proximal anastomosis. And venous flow can be preserved by deep and superficial vein anastomosis. This concept has various advantages including preserving patency of the pedicle in chronic vasculopathy or trauma cases and maintaining the arterial flow by the reverse flow of distal anastomosis and can improve the free flap survival by a two vascular anastomosis system.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.127-133
• /
• 2022

With the increasing interest in the expression of individuality and appearance of modern people, it is time to conduct research and development of novel hair coloring from various angles. Therefore, taking into account the order of discoloration of hair pigments, we selected a creative and novel emulsion as a novel material for hair coloring, rather than a cosmetic material such as hot water extract using natural products dealt with in previous studies, commercially available hair manicure, and oxidation hair dye for hair. Thus, the change in tensile strength and elongation of hair samples by color was studied. As a result of the study, hair with green emulsion paint had a significantly higher maximum load, maximum stress, maximum elongation and breaking load, breaking stress, breaking elongation values are shown. Maximum in terms of modulus, green emulsion applied hair and the control group were higher in the 0-15s strain and 15-145s sections, respectively, and the tangential modulus value was much higher in the control group than the experimental group hairs in all the 0-145s sections. This study, which analyzes the dynamic changes of hair samples that extend the daily color gamut, will greatly contribute to the development of innovative hair coloring materials in the research and production of hair beauty works, and it is judged that it will also contribute to the development of the beauty industry.