• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.370-376
• /
• 2003

Poly(DL-lactide-co-glycolide) nanoparticles were prepared by the modified spontaneous emulsification solvent diffusion method. Polymer solution was prepared by two water-soluble organic solvents, such as ethanol and acetone. Because of its biocompatible nature, PEG-PPG diblock copolymer was used as surfactant and stabilizer. The influence of several preparative variables on the nanoparticle formation, such as type and concentration of stabilizing agent, stirring methods, water/oil phase ratio and polymer concentration were investigated in order to control and optimize the process. After preparation of nanoparticles, particle size and distribution were evaluated by the light scattering particle analyzer. As results, the particle size was 50-200 nm and dispersibility was monodisperse. It was found that the appropriate selections of binary solvent mixtures and polymeric concentrations in both organic and aqueous phases could provide a good yield and favorable physical properties of PLGA nanoparticles.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.1
• /
• pp.21-25
• /
• 2002

The contribution of lipid to thermal flayer generation from glucose-protein reaction was accomplished by isolating flavor compounds from casein-glucose (CG)and casein-glucose-coin oil (CGL) which were stored for 2 and 4 weeks at 6$0^{\circ}C$ and then reacted at 16$0^{\circ}C$ for 1hr. The volatiles from the reactant mixtures were isolated by a solvent extraction method with methylene chloride and analyzed by gas chromatography and gas chromatography-mass spectrometry. Pyrazine, methylpyrazine, 2,5-dimethylpyrazine, 2-dimethylpyrazine ,2-ethy-5- methyIpyrazine and 2-acetylpyrrole originated from interaction of thermal degradation of casein and lipid oxidation were identified in the CGL samples. It was also found that 3-methyl-1-butanol, 2-cyclopene-1,4-diode, heptanal, nonanal, and 2-heptanone were derived from lipid source. Two additional fatty acids, heptanoic acid and octanoic acid were also identified in the CGL samples. 5-Hydroxymethyl-2-furfural, the most abundant volatile, was responsible for the formation of sugar degradation product. The results suggested that the presence of lipid in the samples had more effect on the contribution of volatile formation of glucose-protein thermal reaction than the absence of lipid in the samples.

• Environmental Analysis Health and Toxicology
• /
• v.6 no.3_4
• /
• pp.105-121
• /
• 1991

The object of this study is to investigate the toxicity of fenvalerate [(RS)-$\alpha$-cyano-3 -phonoxybenzyl-(RS)-2-(4-ch1orophenyl)-3-methylbutyrate] and the effect of carbaryl on the toxicity of fenvalerate. Rats were treated with fenvalerate (50 mg/kg, 100 mg/kg), carbaryl (50 mg/kg, 100 mg/kg) or mixtures of the two compounds (fenvalerate+carbaryl: 50 mg/kg+50 mg/kg, 50 mg/kg+100 mg/kg) by oral administration for 1~3 weeks. Control groups were treated with corn oil. The experimental results were summarized as follows. 1. LD$_{50}$ values of fenvalerate and carbaryl in male rats were 385 mg/kg and 625 mg/kg respectively. When 50 mg/kg and 100 mg/kg of carbaryl were administratrd, LD$_{50}$values of fenvalerate were 265 mg/kg and 225 mg/kg respectively. 2. Biochemical parameters such as ALT, LDH and glucose in serum were much more increased in the groups treated with mixture than the groups treated with either one of fenvalerate or carbaryl. 3. The groups treated with carbaryl and mixture for 3 weeks, the contents of cytochrome P-450 in the liver were significantly increased. In renal microsomal fractions, however, no significant changes of drug metabolizing enzyme activities were observed. 4. The activities of aniline hydroxylase in hepatic microsomal fractions were increased in the groups treated with fenvalerate and mixture and activity was much more increased in the groups treated with mixture. 5. The activities of ATPase in the groups treated with fenvalerate were decreased than that of groups treated with mixture. TBA values and the activity of glucose-6 -phosphatase in the liver were not significantly changed. 6. In mixture treated groups, the activities of cholinesterase in serum and in the liver were more decreased than those of carbaryl treated groups. The activities of carboxylesterase in serum in the liver were slightly increased in mixture treated groups, but in fenvalerate treated groups, the activities of carboxylesterase were much more increased than those of control groups. 7. As a result of this study, when carbaryl was as the synergist of fenvalerate, carbaryl inhibited the activities of esterases, so the toxicity of fenvalerate was increased.sed.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.121-127
• /
• 2003

The objective of this study was to solidify the simvastatin self-microemulsifying drug delivery system (SMEDDS) and to improve the encapsulation efficiency of solidified alginate beads using sodium alginate. Typical simvastatin SMEDDS was composed of various oils, surfactants and cosurfactants. Also solidified-alginate beads was prepared by crosslinking liquid emulsion mixtures containing sodium alginate and other excipients (cetylpyridinum chloride (CP-Cl), hydroxypropyl methylcellulose, starch and so on). in $CaCl_2$ solution, it has been investigated that the drug release pattern and encapsulation efficiency were varied with the ratio of cationic lipid (CP-Cl). Solidified sodium alginate beads containing simvastatin SMEDDS were redispersed into media without re-aggregation. Oil droplet size of redispersed solidified-beads in media produced smaller than the initial size. The density of beads and drug loading amount were increased with increasing cationic lipid content. These systems have advantages of storage stability and predictability of drug release rate.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.518-524
• /
• 2014

Electrospinning has gained interests as a polymer processing technique for nanofiber fabrications. It is well known that both polymer solutions and polymer melts can be electrospun. Among them, melt electrospinning is environmentally friendly technique due to the absence of solvent. However, the diameter of melt-electrospun fibers is typically thicker than solution-electrospun fibers. By using a home-made melt-electrospinning device, micron-sized fibers with smooth and even surfaces were electrospun successfully. We demonstrate that low-density polyethylene fibers can be reduced in diameter with a viscosity-reducing additive such as low molecular weight polyethylene monoalcohol and polyethylene wax. The diameter was further reduced by blending it with oxidized polyethylene wax due to polarity increment. Additionally, parameters affecting the diameter were analyzed such as an applied voltage and a spinning distance.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.627-637
• /
• 1985

The combustion process and the performance of a diesel engine are seriously affected by the ignition delay period of the fuel used. Some methods for improving the combustion process in the engine cylinder are to well match the strength of air swirl with the space of sprays in the cylinder, to blend an ignition improver in the fuel, to inject a small amount of auxiliary fuel prior to main injection and so on. Recently, the improvement of fuel economy and the reduction of exhaust smoke and NO have been successfully achieved by supplying diesel engines with emulsified fuel. However, it is very difficult to know real combustion mechanism under such special conditions, because of many factors affecting on the combustion process in practical reciprocating engine. In the present paper, the combustion processes of diesel fuel and emulsion fuel were tried to improve and to observe by making contact with various lean pre-mixtures in the hot air stream duct. This hot air stream method has an advantage that the spontaneous combustion process can be observed under a simplified condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.69-81
• /
• 1970

1. Four soybean varieties in pure stand and mixtures were grown in 20 competition treatments of genotypes at within-row spacings of 5, 10, 20, 40, and 80 cm and were investigated in 10 characters for different genotypes. 2. Yield, weight of 100 seeds, height, number of branches, pods per plant, and seeds per pod were highly significant for within-row spacing treatment. 3. There was no spacing treatment effect for number of nodes and days to flower. Maturity did not respond equally in four varieties for spacing effect. 4. Fruiting period was influenced by spacing treatment. Height and number of branches were increased as within-row spacings were increased. Seed yield per area was increased oppositely. 5. Difference between fertilizing and non-fertilizing treatment was not significant in this experiment. At 80 cm spacing no competition effect occurred for yield. 6. In the competition effect, Kumkang Daerip was strong competitor ani Chungbuck Back and Shelby were weak competitors. 7. The within-row spacing of uniformity in roder to increase yield per area was proved as 20 cm in this study. 8. Oil percent was increased as spacings were increased and protein percent was as spacings were decreased.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.881-885
• /
• 1997

The solubilizing capacity of GL-12, LAS, SLES aqueous solutions and that of mixed surfactant systems were studied using sudan III, which is oil-siluble dye. The solubilizing capacity of mixed surfactant systems was greatly influenced by the mixing ratios. Generally, the solubilizing capacity increased as the composition of GL-12 in the mixed systems increased. From the effect of NaCl on the solubilizing capacity, it was found that the solubilizate is located near the palisade layer in the GL-12/LAS system, and the solubilizate is located inside the micellar core in the GL-12/SLES mixed system. These differences in the location of slubilizate inside micelles result from the difference of molecular structure between LAS and SLES.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.206-215
• /
• 2005

Polychlorinated biphenyls (PCBs) were commercially produced as complex mixtures beginning in 1929. The PCBs manufactured commercially are known by a variety of trade names including; Aroclor (USA), Phenoclor (France), Kaneclor (Japan), Sovol (USSR) and so on. PCBs are a class of 209 congeners that were widely used in a wide variety of applications, including dielectric fluid in transformers and large capacitors; heat transfer fluids; hydraulic fluids; lubricating and cutting oils; and as additives in pesticides, paints, adhesives, sealants, and plastics. The quantification methods of peak matching and coefficient comparison were compared using the Aroclor 1242, 1248, 1254, 1260 standards. Also, six transformer oils were analyzed as a main source of polychlorinated biphenyls (PCBs) emission into the environment. The transformer oils contained the pure and mixed of Aroclor 1242, Aroclor 1254, and Aroclor 1260. The analytical results using two quantification methods showed the little difference between the measured results.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.114-124
• /
• 2013

To study the effects of structural difference and fatty acid chain length of glyceride, new dispersion agents having various glyceride structures such as mono-, di-, and tri-, were prepared using glycerol extracted from palm oil and fatty acid having various chain length ranges from 12 to 18. These dispersion agents were mixed with the rubber compounds and compared with conventional metal salt dispersion agents. Glyceride dispersion agent provided remarkable improvement in silica dispersion, compared to metal salt fatty acidic one, even though the viscosity of mixtures was relatively high due to low lubricating effect, and this was approved by mechanical properties, wear properties, and Payne effect. Also, the longer in chain length of fatty acid and the smaller in numbers of fatty acid, the dispersity of silica was improved.