• Journal of Acupuncture Research
• /
• v.32 no.2
• /
• pp.131-145
• /
• 2015

Objectives : The purpose of this study was to demonstrate the effectiveness and availability of salt pharmacopuncture of Korean sun-dried salt and processing salt on the basis of bibliographical review. Methods : This study was done through a narrative review of related bibliography including medical books, journals, general bibliography, and web sites. Results : 1. Korean sun-dried salt is produced in the ground with soil, tiles, and pottery. Sun-dried, traditional, granulated, bamboo, and grilled salts are all appropriate for medical use. They are composed of a lower level of NaCl and unnecessary substances, and have a higher water and mineral content. 2. The 9~30 g of NaCl included in the physiological saline matches the ratio of a normal human body. However, if the saline is used for water supply, it should be improved because the recommended amount is much lower. 3. Medicine that includes NaCl is applied for lessening the congestion of the nasal cavity, alleviating cornea swelling, or for a lack of water. NaCl can also be used for washing contact lenses as well as cleaning the mucous membrane of the eyes and nose. 4. Salt relieves anger, detoxifies, induces vomiting, builds strong muscles and bones, gives energy, slows aging, and ultimately improves health. 5. Salt treats many diseases including: cardiovascular, hematosis, respirometer, obstetric, musculoskeletal, mineral supplement, eye, teeth and skin issues, etc.. However, salt is not used for treating asthma, cough, or other ailments mainly affecting the vascular system. 6. While NaCl in salt absorbs water and the vascular constriction results in higher blood pressure, the pressure induced from salt is actually a physiologically temporary rise. Rather, salt helps remove oil from the body and its potassium lowers blood pressure. Conclusions : It was suggested that salt pharmacopuncture of Korean sun-dried salt and processing salt should be made available for adjusting the physiological salt concentration and control of the Na side effects, therefore it would be useful in the treatment of diseases.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.861-869
• /
• 2010

The present study aims to evaluate the characteristics of atmospheric polycyclic aromatic hydrocarbons (PAHs) pollution in roadside and residential areas of two Korean metropolitan cities (Seoul and Incheon) and a background area (Seokmolee). This purpose was established by analyzing temporal and spacial concentration distribution of total and 7 individual PAHs, which were extracted from ambient particulate matters, and by utilizing a multivariate statistical method (principal component analysis, PCA) for the qualitative determination of potential PAH sources. Target PAHs included benzo(a)anthracene (BaA), benzo(a)pyrene (BaP), benzo(b)fluoranthene (BbF), benzo(k)fluoranthene (BkF), chrysene (Chr), dibenzo(a,h)anthracene (DahA), and indeno(1,2,3-cd)pyrene (IcdP). For all surveyed sites, the concentrations of total PAHs were higher in winter season than in other seasons. However, the concentrations of individual PAHs varied with surveyed sites. In both residential and roadside sites of Seoul and Incheon, BbF revealed the highest atmospheric levels. For all 7 target PAHs, the ambient concentrations were higher in Seoul and Incheon than in a background area (Seokmolee). In both residential and roadside areas, the concentrations of 4 target PAHs (BaA, BbF, BkF, DahA) were higher in Incheon than in Seoul. However, both the residential and roadside Chr concentrations were comparable in Seoul and Incheon. In addition, the residential IcdP concentrations were higher in Incheon than in Seoul, whereas the roadside concentrations were higher in Seoul. The roadside and residential BaP concentrations exhibited the reverse result to the IcdP concentrations. An PCA analysis suggested that atmospheric PAHs in both residential and roadside areas would be due to combined effects of several potential sources such as gasoline- and diesel-fueled vehicles, coal/oil combustion, and waste incineration.

• Clean Technology
• /
• v.20 no.1
• /
• pp.88-94
• /
• 2014

During the past decades much attention has been paid to the desulfurization of diesel oil which is important as a source for the fuel cells to prevent the sulfur poisoning of both diesel steam reforming catalyst and electrode of fuel cell. Although alternative desulfurization techniques have been investigated, desulfurization for ultra-low sulfur diesel (ULSD) is still challenged. Therefore, this research focuses on the desulfurization of commercial ULSD for the application to molten carbonate fuel cell (MCFC). Herein, the performances of several kinds of commercial adsorbents based on activated carbons, zeolites, and metal oxides for desulfurization of ULSD were screened. The results showed that metal oxides based materials can feasibly reduce sulfur concentration in ULSD to a level of 0.1 ppmw while activated carbons and zeolites did not reach this level at current conditions.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.228-234
• /
• 1998

Among various water contaminents, organic compounds like phenol are difficult to be removed or destroyed by conventional methods under the unusual discharge conditions. The separation of phenol from aqueous solution has been carried out by several methods recently: absorption by an activated carbon, solvent extraction and liquid membrane technology. The liquid membrane based on water-oil emulsification has been tested as an alternative technology of the conventional technology. In this work, tri-n-butyl phosphate(TBP) and liquid polymers were examined as a liquid membrane in the supported liquid membrane(SLM). The feed concentration of phenol was varied and various types of liquid membranes were used to examine their effects on separation of phenol. It was found that TBP, polypropylene glycol 4000(PPG 4000) and polybutytene glycol 500(PBG 500) were proper carriers because mass transfer rates through them were much higher than or similar to that through methyl isobutyl ketone(MIBK) which was used as a conventional solvent in a solvent extraction process.

• Journal of Environmental Health Sciences
• /
• v.27 no.2
• /
• pp.10-16
• /
• 2001

To evaluate an effect of circadian variation on the xylene metabolizing enzyme activities, 50% m-xylene in olive oil(0.25 $m\ell$/100g body weight) was intraperitoneally administered to the rats every other day for 6 days both in the night; 24:00 and the day; 12:00. Then animals were sacrigiced at 8hr after last injection of m-xylene. Hepatic microsomal cytochrome p450 contents were more increased both in control and xylene treated rats of night phase than those of day phase. But the activity of hepatic alcohol dehydrogenase(ADH) in control of night phase showed the similar value with that in those of day phase and xylene treated rats of day phase showed an increasing tendency of hepatic ADH activity as those of night phase showing similar activity. Furthermore, control rats of night phase than those of day phase. And by xylene treatment, enzyme activities of rats of day phase were higher tendency in rats of control but those of night phase were somewhat inhibited. Besides, xylene-treated animals of night phase showed increasing tendency of urinary methylhippuric acid concentration compared with those of day phase. On the other hand, liver weight per body weight(%), hepatic lipid peroxide content and serum xanthine oxidase activity were higher in night phase. And the activities of hepatic oxygen free radical metabolizing enzymes such as xanthine oxidase, gluthathione S-transferase, and xylene-treated rats of night phase than those of day phase. In conclusion, it can be hypothesized on the basis of the results that the accumulation rate of m-xylene intermediate metabolite, i.e. m-methylbenzaldehyde in liver tissus may be higher in night phase than in day phase and it may be responsible for higher liver toxicity in bight phase than in day phase.

• Advances in environmental research
• /
• v.2 no.2
• /
• pp.155-166
• /
• 2013

A preliminary investigation to establish the status of contamination of trace metals in the Western coast of Ghana was conducted prior to the commercial production of crude oil in the area. The study revealed the presence of heavy metals such as Pb (4.00-79.64 mg/kg), As (8.81-236 mg/kg), Cu (12.86-108.06 mg/kg), V (28.07-953.32 mg/kg), Zn (7.08-264.25 mg/kg), Cr (101.69-1366.62 mg/kg), Ni (42.41-451.43 mg/kg), Mn (16.77-1890.45mg/kg), Br (7.66-142.78 mg/kg), Ti (542.03-19960 mg/kg) and Fe (7472.88-97120 mg/kg) at six sites sampled along the coast. With the exception of Ti and Fe which showed no variation in metal concentration, the rest of the metals varied significantly among the sampled locations. Potential ecological risk of metals particularly of Co, As and Br which exhibited extreme enrichment of the sediments indicates considerable metal pollution in the studied areas. The degree of contamination is of particular concern especially to benthic biota that inhabit this environment for survival.

• The Korean Journal of Pesticide Science
• /
• v.4 no.3
• /
• pp.75-81
• /
• 2000

These studies were carried out to investigate the toxicities of 38 registered insecticides to the sweetpotato whitefly (Trialeurodes vaporariorum). Insecticide activities were evaluated by testing systemic action and residual effect in the laboratory, and control efficacy in the greenhouse. All experiments were tested at the recommended concentration(ppm) of each insecticides. Insect growth regulators (IGRs), only pyriproxyfen showed over 90% of ovicidal effect. The insecticides that showed over 90% of larvicidal activity oil 3rd nymphal instars were abamectin, acetamiprid, chlorpyrifos-methyl, imidacloprid, pyripoxyfen, and acetamiprid+ethofenprox. Insecticides with 100% adulticidal activity were abamectin, acephate, acetamiprid, benfurcarb, bifenthrin, furathiocarb, endosulfan, fenitrothion, imidacloprid, phenthoate, pymetrozine, acetamiprid + ethofenprox, ethofenprox + diazinon, furathiocarb + difluberlzuron, and triazamate+${\alpha}$-cypermethrin. Abamectin, acetamiprid, imidacloprid, pyriproxyfen, and acetamiprid + ethofenpox showed both residual effect and systemic activity. In tile control efficacy test on B. tabaci, 90% control values were obtained at 11th day after treatment of the insecticides including abamectin, acetamiprid, imidacloprid, pyripoxyfen and acetamiprid + ethofenprox. These results indicate that abamectin, acetamiprid, imidacloprid, pyriproxyfen and acetamiprid + ethofenprox can be used for tile control of B. tabaci in field.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.291-297
• /
• 2004

Water-soluble chitosan micro spheres were prepared by emulsification of chitosan solution in mineral oil followed by cross linking reaction with different amount of the cross linking agent (glutraraldehyde), different chitosan concentration. Then, the physicochemical properties such as morphological change by degradation, drug loading efficiency, and drug release profiles were investigated with the drug loaded water-soluble chitosan microspheres. Norfloxacin loaded water-soluble chitosan micro spheres showed excellent drug entrapping capacities without burst release caused by surface bound drug. The absence of the surface bound drug also confirmed by X-ray diffraction study. Degradation and drug release studies showed that the amount of the crosslinking agent played a crucial role for drug loading, release and degradation. The water-soluble chitosan micro spheres showed more sustained drug release profiles with slower degradation and larger particle size by increasing crosslinking agent.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.360-366
• /
• 2010

In the course of a searhing environmental friendly antifungal compounds, we found that mixture of methyl esters of fatty acids obtained from soybean oil had potent control efficacy against barley powdery mildew (Blumeria graminis f. sp. hordei). In this study, ten alkyl fatty acid esters (AFAEs) were tested for in vivo antifungal activity against five plant diseases such as rice blast, rice sheath blight, tomato gray mold, tomato late blight and barley powdery mildew. Some AFAEs showed the most control efficacy against barley powdery mildew among the tested plant diseases. By 5-hr protective and 1-day curative applications, six AFAEs ($3,000\;{\mu}g/ml$), including methyl and ethyl palmitates, methyl and ethyl oleates, methyl linoleate, and methyl linolenate demonstrated both curative and protective activities against barley powdery mildew. In contrary, methyl laurate strongly controlled the development of powdery mildew on barley plants by curative treatment at a concentration of $333\;{\mu}g/ml$, but did not show protective activity even at $3,000\;{\mu}g/ml$. Under greenhouse conditions, the seven AFAEs ($1,000\;{\mu}g/ml$) except for methyl and ethyl stearates, and methyl caprylate also effectively controlled cucumber powdery mildew caused by Podosphaera xanthii. Among them, methyl and ethyl palmitates ($333\;{\mu}g/ml$) represented the most control activity of more than 68% against the disease. The results are the first report on the antifungal activity of methyl and ethyl esters of fatty acids against plant pathogenic fungi.

• New & Renewable Energy
• /
• v.8 no.4
• /
• pp.38-43
• /
• 2012

Biodiesel is non-petroleum based fuel produced from vegetable oils or animal fats through transesterification. The compositions of saturated and unsaturated fatty acids in the feedstocks are important factors for biodiesel quality in terms of low-temperature fluidity and oxidative stability. The goal of this study is to improve the cold flow property of biodiesel from vegetable and animal origin containing highly saturated methyl esters (approx. 50%). In this purpose poly-saturated methyl esters in palm and tallow biodiesel were removed via urea-based fractionation and then the recovered fractions (enriched unsaturated fatty acid methyl esters) were supplemented with cold flow improvers. The highest concentration of unsaturated fatty acid methyl esters (93.8%) was obtained using a urea/fatty acid ratio of 3:1 at the crystallization temperature of $0^{\circ}C$ for 17 hours in incubation, with recovery of 71% and the addition of cold flow improver (Flozol$^{(R)}$ 515, 3,000 ppm) to the enriched poly-unsaturated fatty acid methyl esters reduced the CFPP(cold filter plugging point) of palm biodiesel from $12^{\circ}C$ to $-42^{\circ}C$. In tallow biodiesel both the enrichment of unsaturated fatty acid methyl esters (93.71%) and the addition of cold flow improver (Infineum R408, 3,000ppm) reduced the CFPP from $10^{\circ}C$ to $-32^{\circ}C$.