• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.22-28
• /
• 2008

Generally block imbedded type oil pump is adopted to make a small engine. In this paper 1D/3D numerical simulations were conducted to reduce energy consumption of the block imbedded type oil pump. At each stage of engine development we have estimated the oil flow rate and pressure to optimize oil pump sizes by using the 1D system analysis and then accomplished 3D CFD(Computational Fluid Dynamics) simulations to optimize oil pump shapes including inlet/outlet port. As a result, the energy consumption of oil pump has been reduced to nearly 27% and the engine fuel consumption to $1{\sim}1.5%$.

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.76-81
• /
• 1997

The lubrication characteristics of high-speed roller bearings at oil-starvation have been investigated empirically using the bearings employed in small industrial gas turbine engines. Testing was done by simulating the oil-starvation conditions in engines, such as stopping the oil-supply to the bearing during normal operating, starting without oil-supply at atmospheric temperature, and accelerating with oil-supply at atmospheric temperature. During testing, the temperature of bearing, the power consumption, and the rotating resistance of the bearing were measured. From this study, on the contrary to the ball bearing, it was found that the resistance of the bearing was higher at the regime of without oil-supply than that at the regime of with oil-supply, despite less power consumption.

• Communications for Statistical Applications and Methods
• /
• 제29권1호
• /
• pp.41-51
• /
• 2022

We forecast the US oil consumption level taking advantage of google trends. The google trends are the search volumes of the specific search terms that people search on google. We focus on whether proper selection of google trend terms leads to an improvement in forecast performance for oil consumption. As the forecast models, we consider the least absolute shrinkage and selection operator (LASSO) regression and the structured regularization method for large vector autoregressive (VAR-L) model of Nicholson et al. (2017), which select automatically the google trend terms and the lags of the predictors. An out-of-sample forecast comparison reveals that reducing the high dimensional google trend data set to a low-dimensional data set by the LASSO and the VAR-L models produces better forecast performance for oil consumption compared to the frequently-used forecast models such as the autoregressive model, the autoregressive distributed lag model and the vector error correction model.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.794-799
• /
• 2011

In order to reduce the oil consumption for a 2 stroke free piston hydrogen fueled engine, the behaviors of residual lubricant oil of the cylinder wall surface were visualized and oil mass emitted into exhaust port was measured by using research engine with cross-head and eccentric crankshaft. As the results, it was shown that characteristics of residual lubricant oil such as oil thickness and distribution were remarkably different from a conventional 4 stroke engine. It was also analyzed that these tendencies relied on the configuration and installed position of the exhaust port, piston pin boss and so on.

• 플랜트 저널
• /
• 제12권3호
• /
• pp.39-45
• /
• 2016

기존 벙커C유에 바이오중유 혼합비율을 50%, 80% 및 100%로 변화시키면서, 발전기 출력 320 MW, 380 MW 일 때 각각의 시간당 연료소비량을 측정하였다. 벙커C유 전소일 때의 시간당 연료소비량과 비교한 결과 발전기 출력 320 MW에서 바이오중유 혼합비율이 50%부터 100%까지 높아짐에 따라 시간당 연료소비량이 11.0%에서 20.4%까지 증가함을 알 수 있었다. 또한 발전기 출력 380 MW에서는 바이오중유 혼합비율이 50%부터 100%까지 높아짐에 따라 시간당 연료소비량이 12.0%에서 21.1%까지 증가함을 알 수 있었다. 더 나아가 측정된 시간당 연료소비량과 발전기 출력, 연료의 고위발열량을 이용하여 발전효율을 산출하였고, 발전기 출력 320 MW, 380 MW에서 모두 바이오중유 혼합비율이 50%부터 100%까지 높아지면서 발전효율은 감소함을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제5권2호
• /
• pp.119-126
• /
• 2002

In this study, general engine oil and the Miracle top engine oil of Dongjin chemistry company were tested to find the effects to the SI engine performance. Roller dynamometer used to find maximum power, fuel consumption rate and the emission. Maximum power was measured higher when the Miracle top engine oil was used in the vehicle. By use of the Miracle top engine oil, fuel consumption rate and emission was measured lower and compression pressure was higher compared use of general engine oil. Also the Miracle top engine oil was found to decrease the engine noise at the low RPM. And after 1,500km drive at the same condition, the dust in the oil pan and oil filter was measured less when the Miracle top engine oil used compared than general engine oil used.

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.311-317
• /
• 2009

To satisfy the more severe emission regulation and the demand of higher fuel economy in near future, the combustion pressure and power output of engines is going to be higher. In order to get the reduction of engine emission and the higher power, it is needed the reduction of the tension and width of ring pack. The lower tension ring and the thinner width ring can bring not only the friction reduction between the ring and liner during engine running, but also the adjustment of the blow-by gas and oil consumption by changing in the pressure in the crevice volume and the axial motion of rings togethe with the adjustment of the inter-ring crevice volumes. In this study, by using a developed basic computer proglram that predicts the blow-by gas and oil consumption of engines, it is to be examined how satisfying the level of the blow-by gas and oil consumption as being installed the piston ring pack with thinner width ring and lower tension ring.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.662-668
• /
• 2006

The effects of fuel injection nozzle hole on the NOx emission and fuel oil consumption of medium speed diesel engine HYUNDAI HiMSEN 6H21/32 engine are investigated by engine performance simulation. The results of performance simulation are verified by experimental results of NOx omission fuel oil consumption, cylinder pressure, and heat release rate according to the variation of the number of fuel injection nozzle hole and engine load. The performance simulations are also carried out to optimize the fuel injection nozzle of 6H21/32 engine in respect to the NOx emission and fuel oil consumption. The engine performance measurements are performed to verify the results of performance simulation and to investigate the effects of fuel injection nozzle on engine performance. The results of measurement indicate that significant NOx reduction can be achieved with minimum deterioration in fuel oil consumption by optimizing the geometry of fuel injection nozzle on 6H21/32 engine.

• 해양환경안전학회지
• /
• 제18권1호
• /
• pp.41-47
• /
• 2012

최근 국제 원유가의 폭등으로 선박의 연료비 부담이 상대적으로 가중되고 있으며, 또한 연료의 연소과정에서 발생하는 온실가스에 대한 국제적 규제 움직임도 가속되고 있다. 이와 같은 상황에서, 온실가스의 배출을 최소화하면서 연료소모량을 줄이기 위해 많은 선사들이 감속운항을 취하고 있으며, 선박용 엔진 개발 분야에서는 엔진의 연료 효율성 개선 문제와 대체에너지 사용 분야에 주력하고 있다. 따라서, 본 연구에서는 실제 해상에서의 선속대비 연료소모량을 계측하고, 건조과정에서 실시된 육상 엔진실험 자료와 2007~2009년까지의 AB-LOG를 분석하여, 특정 외력조건에서의 대상선박에 대한 연료소모량을 고려한 최적의 속력을 14~15노트, 주기관의 RPM을 140~150 RPM으로 제안하였다.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.197-204
• /
• 1997

In order to investigate the relationship between the ring gap ratio and oil consumption, the axial motion of piston ring was measured by capacitance technique. The pressures of each land and the motions of each ring were calculated by orifice-volume method in which it is assumed that the ring gaps are the only gas leakage paths. The calculated results were compared with the measured ones. Consequently, it is known that the increase of ring gap ratio has the effect of lifting the first ring. The calculated results were roughly in accordance with those measured. Therefore, it is possible to predict the effect of design variables on the pattern of ring motion. It is known that the lift off of first ring accompanied by the increase of ring gap ratio make rise of oil consumption.