Browse > Article
http://dx.doi.org/10.9725/kstle.2009.25.5.311

A Study on Oil Consumption Related with the Piston Ring Pack with Thinner Ring Width and Lower Ring Tension  

Chun, Sang-Myung (Dept. of Automotive Enineering, Hoseo University)
Publication Information
Tribology and Lubricants / v.25, no.5, 2009 , pp. 311-317 More about this Journal
Abstract
To satisfy the more severe emission regulation and the demand of higher fuel economy in near future, the combustion pressure and power output of engines is going to be higher. In order to get the reduction of engine emission and the higher power, it is needed the reduction of the tension and width of ring pack. The lower tension ring and the thinner width ring can bring not only the friction reduction between the ring and liner during engine running, but also the adjustment of the blow-by gas and oil consumption by changing in the pressure in the crevice volume and the axial motion of rings togethe with the adjustment of the inter-ring crevice volumes. In this study, by using a developed basic computer proglram that predicts the blow-by gas and oil consumption of engines, it is to be examined how satisfying the level of the blow-by gas and oil consumption as being installed the piston ring pack with thinner width ring and lower tension ring.
Keywords
oil consumption; blow-by gas; piston ring pack; top ring gap; inter-ring pressure; thinner width ring; lower tension ring;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Chun, Sang Myung, 'A Basic Study on Piston Ring Pack,' J. of the KSTLE, Vol.21 , No. 2, pp. 83-92, 2005
2 Smith Jr., M., Tunkel, N., Bachman, H., and Femandez, W., 'A New Look at Multigraded Diesel Engine Oils,' SAE Paper No. 760558, 1976
3 Miltsios, G K., Patterson, D. J., and Papanastasiou, T. C., 'Solution of the Lubrication Problem and Calculation of the Friction Force on the Piston Ring,' J. of Tribology Vol. 111 , pp. 635-641 , 1989   DOI
4 Yun, J. E., Chung, Y., Chun, S. M., and Lee K. Y., 'Study of a Piston Ring Assembly Design through Experimental and Numerical Investigation of InterRing Gas Pressure and Blow-By in a Four-Stroke SI Engine,' ICP-8-174, The 8th International Pacific Conference on Automotive Engineering, Pacific Convention Plaza, Yokohama, Japan, 1995
5 Kuo, T., Sellnau, M. C., and Theobald, M. A., 'Calculation of Flow in the Piston-Cylinder-Ring Crevices of a Homogeneous-Change Engine and Comparison with Experiment,' SAE Paper 890838, 1989
6 Hoult, D. P. and Shaw II, B. T., 'The Puddle Theory of Oil Consumption,' Tribology Transactions, Vol. 37, No. 1, pp. 75-82, 1994   DOI   ScienceOn
7 Das, P. K., 'Analysis of Piston Ring Lubrication,' SAE Paper No. 760008, 1976
8 Furuhama, S. and Tada, T., 'On the Flow of the Gas through the Piston Rings,' JSME Bulletin, Vol. 4, No. 16, 1961
9 Namazian, M. and Heywood, J. B., 'Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power,' SAE Transaction, Vol. 91 , Section 1, pp 261-288, 1982.(SAE Paper No. 820088, 1982.)
10 Taylor, G I., 'Deposition of a Viscous Fluid on the Wall of a Tube,' J. of Fluid Mechanics, Vol. 10, pp. 161-165, 1961   DOI
11 Furuhama, S., Hiruma, M., and Tsuzita, M., 'Piston Ring Motion and Its Influence on Engine Tribology,' SAE Paper No. 790860, 1979
12 Sang Myung Chun, 'A Study on Engine Oil Consumption,' J. of the KSTLE, Vol. 21 , No. 6, pp. 296-301. 2005