• 한국지진공학회논문집
• /
• 제20권6호
• /
• pp.351-360
• /
• 2016

In regions of low-to-moderate seismicity, various types of lap splices are used for longitudinal reinforcement of columns at the plastic hinge zones. The seismic performance of such lap spliced columns, such as strength, deformation capacity, and energy dissipation, is affected by material strengths, longitudinal re-bar size, confinement of hoops, lap splice location, and lap splice length. In the present study, cyclic loading tests were performed for columns using three types of lap splices (bottom offset bar splice, top offset bar splice, and splice without offset bend). Lap splice length($40d_b$ and $50d_b$) was also considered as test parameters. Ties with 90-degree end hooks were provided in the lap splice length. The test results showed that strength, deformation capacity, and energy dissipation of columns significantly differed depending on the details and the length of lap splices. The bottom offset bar splice showed high ductility and energy dissipation but low strength; on the other hand, the top offset bar splice and the splice without offset bend showed high strength but moderate ductility and energy dissipation.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.1-9
• /
• 2008

This report contains the results of structural analysis for the verification of the optimum offset range on the top of T-Bar with stiffener and BKT using at DSME Offset range as $6.0{\sim}10.0mm$ based on the 3-D FE analysis and experimental results of angie type stiffener as described in Annex 1 has been used as yard standard over ten (10) years under all Classification approval. Recently, Owner and Class have requested the confirmation for the misalignment based on the Yard's Standard so that a couple of locations for LNGC and LPGC has been investigated the structural strength by FE method using the offset ranges from 0.0 to 18.0 mm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.329-330
• /
• 2010

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.399-416
• /
• 2010

The purpose of this paper is to utilize the numerical assembly method (NAM) to determine the exact natural frequencies and mode shapes of a multi-step beam carrying multiple rigid bars, with each of the rigid bars possessing its own mass and rotary inertia, fixed to the beam at one point and supported by a translational spring and/or a rotational spring at another point. Where the fixed point of each rigid bar with the beam does not coincide with the center of gravity the rigid bar or the supporting point of the springs. The effects of the distance between the "fixed point" of each rigid bar and its center of gravity (i.e., eccentricity), and the distance between the "fixed point" and each linear spring (i.e., offset) are studied. For a beam carrying multiple various concentrated elements, the magnitude of each lumped mass and stiffness of each linear spring are the well-known key parameters affecting the free vibration characteristics of the (loaded) beam in the existing literature, however, the numerical results of this paper reveal that the eccentricity of each rigid bar and the offset of each linear spring are also the predominant parameters.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.48-53
• /
• 1993

At present, the manufacturing industry is in a process of a great change. There is a demand for a variety of types and shorter product life. The change increases the number of different tools and frequencies of tool changes. For the most part, the tools are presetted and offset values are entered manually or via punched tapes to NC machines. Thus a large amount of capital is tied up in the tool area and considerable productive time is lost. Consequently, there is a need for improvement in tool management. This paper describes a computer controlled tool data management system which include: 1) tool identification with bar code. 2) computer aided management and updating of tool data. 3) tool data communication with tool presetter, CNC, etc.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.131-132
• /
• 2013

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.208-213
• /
• 2012

In this paper, the radial error of a rotary table at five-axis machine tool is evaluated by utilizing ISO 230-2 and estimation method using double ball-bar. The geometric error of a rotary table is defined as position dependent geometric errors or position independent geometric errors according to their physical character. Then estimation method of geometric errors using double ball-bar is simply summarized including measurement path, parametric modeling and least squares approach. To estimate representative radial error, offset error, set-up error which affect to the double ball-bar data, mean value of measured data including CCW/CW-direction are used at estimation process. Radial errors are separated from measured data and used for evaluation with ISO 230-2. Finally, suggested evaluation method is applied to a rotary table at five-axis machine tool and its result is analyzed to improve the accuracy of the rotary table.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1105-1110
• /
• 2001

본 논문은 머리진동 측정용 바이트 바의 동적 특성에 관한 연구이다. 머리진동의 관심주파수 영역은 0.5Hz~30Hz 범위의 주파수이며 기구학적 이론들을 이용하여 측정된 선형 가속도로부터 머리의 각각속도를 계산하는 과정을 소계한다. 본 논문에서는 9개의 선형가속도를 이용하여 각각속도를 구하는 방법에 대한 검증뿐 아니라 나아가 센서의 측정점의 Offset 영향을 고려한 이론식을 제시한다.

• 문화기술의 융합
• /
• 제6권1호
• /
• pp.515-520
• /
• 2020

본 연구에서는 4절 평행 링크의 설계와 실제 구현에 대한 것으로 평행 4절 링크는 한축의 회전을 다른 축의 회전 운동으로 전달하기 위한 기본적인 기구학적 메카니즘으로 널리 이용되고 있다. 그런데 평행 4절 링크는 운동 도중에 전환점에서 위상 역전이 발생하는 문제가 발생하여 실제 구현에서는 이를 고려하여 설계하여야 한다. 링크 역전을 방지하기 위해서는 추가적인 위상 역전 억제용 링크를 옵셋을 두어 붙이는 2중 평행 사변형 형태의 링크를 제작하면 되는 것으로 일부 알려져 있으나 실제 제작하여 실험한 결과 전환점에서 운동이 부드럽지 않은 현상이 발생하였다. 본 연구에서는 이 문제를 해결하기 위해 위상 역전 방지를 위한 옵셋을 주는 링크외에 보조적으로 평활한 운동을 위한 링크를 추가시켜 피동축이 구동축을 따라 회전할 때에 특정지점에서 위상 역전이 발생하지 않고 평활한 운동을 수행하는 것을 확인 할 수 있었다.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.881-893
• /
• 2000

An analytical synthesis technique for offset slider-rocker 4-bar linkages is devised where transmission angles are used as essential synthesis parameters. Finding the location where both the maximum and the minimum transmission angles arise leads to establishing the algorithm for limiting transmission angles of the slider-rocker linkage which has different offsets according to the direction of the slider. Position analysis by the algorithm gives formula for the dimensional synthesis for the linkage. Application to examples shows that the algorithm and the formula yield proper slider-rocker linkages with regard to limiting transmission angles to the maximum value.