• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.200-207
• /
• 2003

Presented in this paper is a new fast and robust algorithm generating NC tool path for 2D pockets with islands. The input shapes are composed of line segments and cricular arcs. The algorithm has two steps: creation of successive offset loops and linking the loops to tool path. A modified pair-wise technique is developed in order to speed up and stabilize the offset process, and the linking algorithm is focused on minimizing tool retractions and preventing thin-wall rotting The proposed algorithm has been implemented In C++ and some illustrative examples are presented to show the practical strength of the algorithm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1398-1400
• /
• 2005

A novel data driver for passive matrix organic lightemitting devices (PM-OLEDs) with high gray scale images was designed. The proposed circuit consisted of a main current bias circuit as well as sample & hold circuits in each channel of the data driver to compensate a current offset. These results indicate that a data driver designed by using the current offset compensation technique holds promise for poten tial applications in PM-OLED displays with high gray scale images.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.335-337
• /
• 1993

Offset voltage and drift characteristics of operational amplifier are critical factor to precision AID conversion System. In this study, a method is suggested to design the programmable A/D conversion system which has high resolution and low drift characteristics. First, hardware was designed to reduce the offset voltage of integrator and comparator, and analog switches are connected to reduce the drift characteristics of operational amplifier. And then, a calibration software technique was performed to obtain the stable data from A/D converter. The main advantage of our method is high precision A/D converter can be constructed with low cost and high confidence. Therefore proposed method is expected to be used in the industrial field where a high precision measurement is required.

• 대한조선학회논문집
• /
• 제30권4호
• /
• pp.17-22
• /
• 1993

3차원 자유곡면의 교차문제는 기하학적인 방법과 수치적인 방법으로 해결할 수 있으며, 지금까지는 일반적으로 선체형상의 단면을 얻기 위해서 기하학적인 방법인 곡면분할 기법을 사용하여 왔다. 본 논문에서는 할선법, 선형보간법 및 반분법 등 간단한 수치해석 방법들을 사용하여서, Bi-Cubic B-Spline Surface로 표현된 선체형상과 임의의 평면에 의해 교차된 선체 단면형상을 갖는 방법을 수행하여 비교 검토하고자 한다. 곡면간의 교체문제는 임의의 단면형상 파악, 선도작성 및 offset Table 구성에 직접 응용되어진다.

• 자원환경지질
• /
• 제32권5호
• /
• pp.495-502
• /
• 1999

Common-mid-point (CMP) seismic data on a dipping layer have have a stacking different from a horizontal layer velocity and the reflection points on data are dispersed to many positions. Therefore, the CMP data are not stacked well by the conventional stacking method using the horizontal layer velocity. The CMP gather can ideally stacked by applying dip-moveout(DMO) processing. Hence, modern seismic processing indludes DMO as an essential routine step. DMO processing techniques are broadly categorized by two, Fourier transform and integral methods, each of which has many different computational schemes. In this study, the dip-decomposition technique of the Fourier transform method is used to test the DMO effect on the synthetic scismic data generated for dipping structures. Each of constnat offset sections NMO corrected by using the layer velocity of the model and DMO processed. The resulting zero-offset sections for many offsets are stacked. The stacked sections with DMO processing show the structural boundaries of the models much better than those without DMO processing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권1호
• /
• pp.41-48
• /
• 2002

This paper presents a 18-mW, 2.5-㎓ fractional-N frequency synthesizer with l-bit $4^{th}$-order interpolative delta-sigma ($\Delta{\;}$\sum$)modulator to suppress fractional spurious tones while reducing in-band phase noise. A fractional-N frequency synthesizer with a quadruple prescaler has been designed and implemented in a $0.5-\mu\textrm{m}$ 15-GHz $f_t$ BiCMOS. Synthesizing 2.1 GHzwith less than 200 Hz resolution, it exhibits an in-band phase noise of less than -85 dBc/Hz at 1 KHz offset frequency with a reference spur of -85 dBc and no fractional spurs. The synthesizer also shows phase noise of -139 dBc/Hz at an offset frequency of 1.2 MHz from a 2.1GHz center frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.567-570
• /
• 1996

A predictive current control technique for an induction motor employing a resonant DC link inverter is proposed to overcome the disadvantage of the current regulated delta modulation(CRDM) which was employed to control the resonant DC link inverter. The discrete model of an induction motor and estimation of back EMF are investigated and a novel predictive current control technique is newly developed based on this discrete model and estimated back EMF. Using the proposed control technique, the minimized current ripple with reduced offset can be obtained. The usefulness of the proposed technique is verified through the computer simulation.

• 한국정보통신학회논문지
• /
• 제14권4호
• /
• pp.817-823
• /
• 2010

MC-DS-CDMA 전송 방식에서는 서로 직교성이 있는 여러 개의 부반송파들을 사용함으로서 주파수 다이버시티 효과를 얻을 수 있어 우수한 성능의 전송이 가능하다. 본 논문에서는 파일럿 심볼을 이용하여 채널을 추정하는 MC-DS-CDMA 시스템에 MRRC 안테나 다이버시티 기법을 적용할 때의 시스템 성능을 분석한다. 이러한 다중 반송파 전송 방식에서는 채널 추정 에러, 비선형 전력 증폭기 및 송수신간 반송 주파수 편차 등에 의하여 시스템 성능이 열화 된다. 그러므로 위와 같은 영향들을 모두 고려하여 송신 신호가 다중경로 페이딩 채널을 통하여 전송될 때의 데이터 비트 오류율 성능을 분석한다.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1043-1048
• /
• 2011

In this paper, a newsynchronization technique applied to burst-mode communication is proposed. A synchronization technique is to estimate carrier frequency and phase offsets in a noisy channel environment. A fundamental problem for estimating the parameters(carrier phase and frequency offsets) in burst-mode transmission is that the ways of pursuing estimation accuracy and transmission efficiency are always trade-off. To solve this problem, a new carrier recovery technique is proposed to improve the transmission efficiency with reliable performance especially at low S/N. In the proposed technique, the synchronization parameters are first estimated based on a data-aided feed-forward estimation scheme. Then, a phase tracker using decision-directed DPLL estimates the phase offset for the data portion of the burst data. From simulation results, it shows fast synchronization with shorter preamble maintaining reasonable BER performance at low S/N.

• 한국통신학회논문지
• /
• 제32권7A호
• /
• pp.657-665
• /
• 2007

본 논문에서는 광 위상 공액기 (OPC; Optical Phase Conjugator)를 이용하여 WDM 채널들의 광 신호의 왜곡을 보상하는 MSSI (Mid-Span Spectral Inversion) 기술에서 OPC를 중심으로 한 광 전력과 색 분산 비대칭에 의한 한계를 OPC의 위치 변동과 그에 따른 광섬유 구간의 최적 분산 계수들의 적용만으로도 극복할 수 있다는 것을 살펴보았다. 즉 전송로로 1,000 km의 비영 분산 천이 광섬유를 이용한 24 채널 ${\times}\;40\;bps$ WDM 시스템에 본 논문에서 제안한 방법으로 도출된 최적 파라미터 값들을 적용하면 결정할 수 없을 정도로 매우 크게 나타났던 채널 간 전력 패널티를 약 3.5 dB의 양호한 품질로 보상할 수 있는 것을 확인하였다. 또한 본 논문에서 제안한 방법으로 얻은 최적 파라미터들을 이용하면 500 km로부터 ${\pm}15\;km$ 범위 내의 다양한 위치에 OPC를 두고 모든 채널들을 양호하게 보상할 수 있는 WDM 시스템의 유연한 설계가 가능하다는 것을 확인하였다.