• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.200-207
• /
• 2003

Presented in this paper is a new fast and robust algorithm generating NC tool path for 2D pockets with islands. The input shapes are composed of line segments and cricular arcs. The algorithm has two steps: creation of successive offset loops and linking the loops to tool path. A modified pair-wise technique is developed in order to speed up and stabilize the offset process, and the linking algorithm is focused on minimizing tool retractions and preventing thin-wall rotting The proposed algorithm has been implemented In C++ and some illustrative examples are presented to show the practical strength of the algorithm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1398-1400
• /
• 2005

A novel data driver for passive matrix organic lightemitting devices (PM-OLEDs) with high gray scale images was designed. The proposed circuit consisted of a main current bias circuit as well as sample & hold circuits in each channel of the data driver to compensate a current offset. These results indicate that a data driver designed by using the current offset compensation technique holds promise for poten tial applications in PM-OLED displays with high gray scale images.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.335-337
• /
• 1993

Offset voltage and drift characteristics of operational amplifier are critical factor to precision AID conversion System. In this study, a method is suggested to design the programmable A/D conversion system which has high resolution and low drift characteristics. First, hardware was designed to reduce the offset voltage of integrator and comparator, and analog switches are connected to reduce the drift characteristics of operational amplifier. And then, a calibration software technique was performed to obtain the stable data from A/D converter. The main advantage of our method is high precision A/D converter can be constructed with low cost and high confidence. Therefore proposed method is expected to be used in the industrial field where a high precision measurement is required.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.17-22
• /
• 1993

The intersection problem of three-dimensional free form surfaces can be solved by geometrical and numerical methods. Up to now, the subdivision technique, which is classified under the former, has been largely employed to find the cross section of ship hull form. In this paper, an algorithm is presented for intersecting ship hull form in high speed. The high speed calculation algorithm is based on simple numerical methods, such as the secant method, false position method and bisection method. The algorithm is directly applicable to depicting arbitrary ship cross sections, drawing ship lines and constructing the offset table.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.495-502
• /
• 1999

Common-mid-point (CMP) seismic data on a dipping layer have have a stacking different from a horizontal layer velocity and the reflection points on data are dispersed to many positions. Therefore, the CMP data are not stacked well by the conventional stacking method using the horizontal layer velocity. The CMP gather can ideally stacked by applying dip-moveout(DMO) processing. Hence, modern seismic processing indludes DMO as an essential routine step. DMO processing techniques are broadly categorized by two, Fourier transform and integral methods, each of which has many different computational schemes. In this study, the dip-decomposition technique of the Fourier transform method is used to test the DMO effect on the synthetic scismic data generated for dipping structures. Each of constnat offset sections NMO corrected by using the layer velocity of the model and DMO processed. The resulting zero-offset sections for many offsets are stacked. The stacked sections with DMO processing show the structural boundaries of the models much better than those without DMO processing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.41-48
• /
• 2002

This paper presents a 18-mW, 2.5-㎓ fractional-N frequency synthesizer with l-bit $4^{th}$-order interpolative delta-sigma ($\Delta{\;}$\sum$)modulator to suppress fractional spurious tones while reducing in-band phase noise. A fractional-N frequency synthesizer with a quadruple prescaler has been designed and implemented in a $0.5-\mu\textrm{m}$ 15-GHz $f_t$ BiCMOS. Synthesizing 2.1 GHzwith less than 200 Hz resolution, it exhibits an in-band phase noise of less than -85 dBc/Hz at 1 KHz offset frequency with a reference spur of -85 dBc and no fractional spurs. The synthesizer also shows phase noise of -139 dBc/Hz at an offset frequency of 1.2 MHz from a 2.1GHz center frequency.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.567-570
• /
• 1996

A predictive current control technique for an induction motor employing a resonant DC link inverter is proposed to overcome the disadvantage of the current regulated delta modulation(CRDM) which was employed to control the resonant DC link inverter. The discrete model of an induction motor and estimation of back EMF are investigated and a novel predictive current control technique is newly developed based on this discrete model and estimated back EMF. Using the proposed control technique, the minimized current ripple with reduced offset can be obtained. The usefulness of the proposed technique is verified through the computer simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.817-823
• /
• 2010

MC-DS-CDMA is technique where a single data symbol is transmitted at multiple subcarriers which are orthogonal to each other. With this technique, frequency diversity can be achieved. The performance of PSAM MC-DS-CDMA system with the application of MRRC antenna diversity is analyzed. The BER performance of this system over multipath fading environment is evaluated, considering the channel estimation error, carrier frequency offset, and the nonlinear high power amplifier.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1043-1048
• /
• 2011

In this paper, a newsynchronization technique applied to burst-mode communication is proposed. A synchronization technique is to estimate carrier frequency and phase offsets in a noisy channel environment. A fundamental problem for estimating the parameters(carrier phase and frequency offsets) in burst-mode transmission is that the ways of pursuing estimation accuracy and transmission efficiency are always trade-off. To solve this problem, a new carrier recovery technique is proposed to improve the transmission efficiency with reliable performance especially at low S/N. In the proposed technique, the synchronization parameters are first estimated based on a data-aided feed-forward estimation scheme. Then, a phase tracker using decision-directed DPLL estimates the phase offset for the data portion of the burst data. From simulation results, it shows fast synchronization with shorter preamble maintaining reasonable BER performance at low S/N.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.657-665
• /
• 2007

In this paper, it is investigated that the limitation due to the asymmetry of optical power and chromatic dispersion with respect to optical phase conjugator (OPC) for compensating optical signal distortion of WDM channels in mid-span spectral inversion (MSSI) technique is overcame by using OPC position offset and optimal dispersion coefficients of fiber sections, which depend on OPC position offset. It is confirmed that overall WDM channels are efficiently compensated by applying the optimal parameter values obtained from the proposed method into 24 channels ${\times}\;40\;Gbps$ WDM system with non zero - dispersion shifted fiber (NZ-DSF) of 1,000 km, such as power penalties of inter-channel are reduce to almost 3.5 dB from the infinite value. It is also confirmed that the flexible design of WDM system with OPC is possible by using the optimal parameters, in which OPC is placed at ${\pm}15\;km$ from 500 km for efficiently compensating overall channels.