• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.1-19
• /
• 2012

According as gradually increasing the demand for eco-friendly at the printing process, it has been progressed fairly development. Especially, the inks are used by soy oil beginning of ink industry for preventing environment, it is possible to make eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents at all for preventing environment. These eco-friendly inks have a benefits they are able to use the renewable resource. But basically vegetable oils have that reduce the VOC(Volatile Organic Compound) and high viscosity, high solubility properties. So if the vegetable oils use in the ink, set off problem occur on the paper because of slow drying time. In case of vegetable ester, it has similar the molecular weight and kinetic viscosity with hydrocarbon solvent, it is able to control the power of dilution about the resin. So, it has benefit that solve the problem of the existing eco-friendly inks. In this study, different types of ester were made by six types of vegetable oils and used ester in the varnishes and inks properties are comparison with hydrocarbon solvent based ink. By considering the intrinsic properties of vegetable oil, ester used to analyze the changes in ink properties, using ester varnish is applied to study the rheology characteristics and emulsification with inks.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.215-225
• /
• 2006

Today's requirements for print-press runnability and print quality demand an optimised absorption and adhesion of printing ink on the paper surface. Modern coating concepts for high glossing offset grades use ultra fine pigments, whereas binder level has continuously been decreased to a minimum in recent years to achieve the highest possible sheet gloss development and for economical reasons. Both the ultra fine pigments and the reduced binder levels lead in many cases to a faster ink setting rate. On the other hand, matt paper grades use relatively coarse pigments leading to a slow ink setting compared to the high glossing papers. Both too fast and too slow ink setting properties implicate drawbacks in print quality and print press runnability. The mechanisms behind the interactions between ink and coating have been presented in many previous publications. The purpose of this study was to determine and quantify how the ink setting rate is influenced by pigment system (GCC and GCC/clay blends), latex level and latex properties in the topcoat of double coated sheet fed offset paper. The roles of binder level and type in the precoat were also assessed. The effect of calendering (temperature and pressure) was studied with one formulation. The resulting ink setting characteristics were tested using three different laboratory testing instruments. The correlation amongst the different laboratory testing methods is discussed. The results show that by varying the latex properties, the pigment system and/or latex addition level, the ink tack development of ink applied to a topcoat pigment system can be significantly influenced. It can be slowed down as often desired with ultra fine pigments or speeded up in the case of coarse pigments. There was no visible effect on the ink setting rate by using different binder systems in the precoat..

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.23-33
• /
• 2012

With the development of many display technologies currently applied to them in the field of printed electronics, there have been many researches that high resolution printing for thin and uniform pattern. In this paper, printing ink flow properties in the reverse offset mechanism were simulated. The aim of this research is to expect the ink flow behavior between cliches to make fine pattern by a printing technique which is a reverse offset. The simulation results show that almost the same as the experiments and the flow behavior according to the ink film thickness and printing pressure changes could be expected.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.21-36
• /
• 1996

With increased use of halftone dot overprints for offset color printing, it is important to study the density and ink trap of the overprints. In this research the equation to predict the density and the method to evaluate ideally the fractional ink trap are preposed. And also the halftone dot overprinting experiments of Magenta over Cyan or Cyan over Magenta under wet-on-wet or wet-on-dry overprinting using 2-color offset press show the above proposals are reasonable, and show the effect of overprinting sequence on the density and ink trap.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.101-116
• /
• 2010

Last printing market is changing to high-quality color prints for web offset printing. But, color image reproduction based on the relative sheet-ped printing compared to the way, web offset printing are falling. Moreover, it's difficult to maintain the quality of the web offset print. The reason is the worker's decision to rely on. Therefore, the quality of prints was no difference in uniformity and objectivity. We have thought the reason, that the physical properties of inks such as fluidity, viscosity and tack. In addition, varies depending on the physical properties of paper, such as thickness, smoothness, roughness and porosity. Therefore, we studied the properties of ink and paper on the relations between the properties used IGT printability tester. This study of domestic web offset printing inks and papers on the relationship between physical properties and printability were studied. So, to improve printability will be used as the basis resources for web offset printing.

• Korean Journal of Materials Research
• /
• v.22 no.9
• /
• pp.476-481
• /
• 2012

Among the various roll-to-roll printing technologies such as gravure, gravure-offset, and reverse offset printing, reverse offset printing has the advantage of fine patterning, with less than 5 ${\mu}m$ line width. However, it involves complex processes, consisting of 1) the coating process, 2) the off process, 3) the patterning process, and 4) the set process of the ink. Each process demands various ink properties, including viscosity, surface tension, stickiness, and adhesion with substrate or clich$\acute{e}$; these properties are critical factors for the printing quality of fine patterning. In this study, Ag nano ink was developed for reverse offset printing and the effect of polyvinylpyrrolidone(PVP), used as a capping agent of Ag nano particles, on the printing quality was investigated. Ag nano particles with a diameter of ~60 nm were synthesized using the conventional polyol synthesis process. Ethanol and ethylene glycol monopropyl ether(EGPE) were used together as the main solvent in order to control the drying and absorption of the solvents during the printing process. The rheological behavior, especially ink adhesion and stickiness, was controlled with washing processes that have an effect on the offset process and that played a critical role in the fine patterning. The electrical and thermal behaviors were analyzed according to the content of PVP in the Ag ink. Finally, an Ag mesh pattern with a line width of 10 ${\mu}m$ was printed using reverse offset printing; this printing showed an electrical resistivity of 36 ${\mu}{\Omega}{\cdot}cm$ after sintering at $200^{\circ}C$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.1
• /
• pp.45-59
• /
• 2011

According as gradually increasing the demand for Eco-friendly products it has been progressed fairly development at a field of printing and printing inks. The Inks are used by soy oil beginning of ink industry for preventing environment. Now it is possible to make Eco-friendly inks with vegetable ester. So it is not necessary to use petroleum-based solvents for preventing environment. But There is some problems if using vegetable ester to inks. Vegetable ester has high solubility, it causes misting and low viscosity of the Inks. So resin is required high performance. Thus, in this paper, I studied about the properties variation of the Varnish and inks According to using the phenolic modified rosin ester and Soy oil Methyl esters. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.1-16
• /
• 2011

In these days, according to increased environmental regulations, to reduce the VOC content in paints and inks efforts are now in progress. A lot of research have progressed hydrocarbon solvents substitute with vegetable oil or ester in the printing ink but it is restricted to use vegetable oil in the inks because of high molecular weight and viscosity. Oil ester currently developed for printing inks still have some drawbacks, but overall the printability and print quality when using ester than hydrocarbon solvents are showing good results. Thus, in this paper, I studied about the properties variation of the varnish and inks according to vegetable ester, after I reacted vegetable ester using the vegetable fatty acid and ethyl alcohol, butyl alcohol. The compared in order of average molecular weight by the GPC method, rheological properties were found by rotational rheometer, and emulsion behavior were compared by high speed emulsification tester.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.787-793
• /
• 1996

In this paper, to investigate the effect of the offset ink formulation on deinking of Korean old newspaper, the samples printed with five different types of offset ink were aged naturally for 10, 30, 90, 180 days, and then yield, brightness, fiber length, physical properties(tensile, tear, burst index) were evaluated according to aging time. As the aging time increased, the yield and brightness of respective samples decreased. Particially, as the addition amounts of linseed oil increased, those of samples decreased. Therefore, linseed oil is thought to reduce the deinkability of ink. Also, containing rosin-modified phenolic resin and gilsonite seem to reduce brightness of samples according aging time. In physical properties, tensile index and burst index were roughly decreased, but tear index was increased according to aging time. However, the three indexes of the sample containing only linseed oil as the vehicle component were considerably reduced in comparison with those of other samples, as once crosslinked a strong bond between the ink and fibers was produced and made it difficult to defibrate in producing sheets.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.25-33
• /
• 2006

The reality of domestic prints neither possesses an objective standard of standard density nor a spectrophotometric method in regard to process ink. As a result, it creates a difficult communication between a designer and a Prepresser as to estimating the color of reproduction prints. There was an experiment on paper, ink, and printing company to obtain the standard point. The result shows that paper has minimum effect on color reproduction as opposed to ink and different printing companies, which had a great effect. The purpose of this paper is to confirm how different the color reproduction properties of prints are using densitometer and spectrophotometer for three different ink companies. The process color inks of three different companies were used under the same printing environment in this experiment.