• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.353-354
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.689-690
• /
• 2011

• 설비공학논문집
• /
• 제12권4호
• /
• pp.354-362
• /
• 2000

Optimal supervisory control strategy for the set points of controlled variables in the central cooling system has been studied by computer simulation. A quadratic linear regression equation for predicting the total cooling system power in terms of the controlled and uncontrolled variables was developed using simulated data collected under different values of controlled and uncontrolled variables. The optimal set temperatures such as supply air temperature, chilled water temperature, and condenser water temperature, are determined such that energy consumption is minimized as uncontrolled variables, load, ambient wet bulb temperature, and sensible heat ratio, are changed. The chilled water loop pump and cooling tower fan speeds are controlled by the PID controller such that the supply air and condenser water set temperatures reach the set points designated by the optimal supervisory controller. The influences of the controlled variables on the total system and component power consumption was determined. It is possible to minimize total energy consumption by selecting the optimal set temperatures through the trade-off among the component powers. The total system power is minimized at lower supply, higher chilled water, and lower condenser water set temperature conditions.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.32-40
• /
• 1986

A model experiment of purse seine by the circulating water tank was carried out on the changes of net shape and the tension of purseline under operation in two layer current. In the circular tank, the two layer current was made by cutting off the current of upper layer and producing the bottom current by the equipment shown in Fig. 1. The model experiment of purse sein was made on a reduced scale 1 :400, and the experiment was carried out according to the Tauti's model law. When the bottom current of O. 5 knot flows to lower part of three-eighths of net, following results are derived. The depth of sinkerline reached only about 80% of that of no current set. The horizontal shift of sinker line caused by the bottom current is maximized in tight set. The enclosed area by the floatIine immediately after the completion of set net is 61. 5% in tight set, 50. 0 % in loose set and 54. 1 % in lateral set of those in the case of no current. In the first half period of pursing, the tension of the purseline is enhenced by the bottom current and the pattern of increasing is irregular in the tension curves.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.102-111
• /
• 2004

Partial quenching structure of turbulent diffusion flames in a turbulent mixing layer is investigated by the method of flame hole dynamics to develope a prediction model for the turbulent lift off. The present study is specifically aimed to remedy the problem of the stiff transition of the conditioned partial burning probability across the crossover condition by adopting level-set method which describes propagating or retreating flame front with specified propagation speed. In light of the level-set simulations with two model problems for the propagation speed, the stabilizing conditions for a turbulent lifted flame are suggested. The flame hole dynamics combined with level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping. The probability to encounter reacting' state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate in contrast to the stiff transition of resulted from the flame-hole random walk mapping and could be attributed to the finite response of the flame edge propagation.

• 한국연소학회지
• /
• 제9권2호
• /
• pp.18-29
• /
• 2004

Partial quenching structure of diffusion flames in a turbulent mixing layer has been investigated by the method of flame hole dynamics in oder to develope a prediction model for the phenomenon of turbulent flame lift off. The present study is specifically aimed to remedy the shortcoming of the stiff transition of the conditioned partial burning probability across the crossover condition by employing the level-set method which enables us to include the effect of finite flame edge propagation speed. In light of the level-set simulation results with two models for the edge propagation speed, the stabilizing conditions for turbulent lifted flame are suggested. The flame hole dynamics combined with the level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping based on three critical scalar dissipation rates. The probability to encounter reacting state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate. Such a smooth transition is attributed to the finite response of the flame edge propagation.

• ETRI Journal
• /
• 제31권5호
• /
• pp.481-488
• /
• 2009

This paper proposes a new multiuser scheduling algorithm that can simultaneously support a variety of different quality-of-service (QoS) user groups while satisfying fairness among users in the same QoS group in MIMO broadcast channels. Toward this goal, the proposed algorithm consists of two parts: a QoS-aware fair (QF) scheduling within a QoS group and an antenna trade-off scheme between different QoS groups. The proposed QF scheduling algorithm finds a user set from a certain QoS group which can satisfy the fairness among users in terms of throughput or delay. The antenna trade-off scheme can minimize the QoS violations of a higher priority user group by trading off the number of transmit antennas allocated to different QoS groups. Numerical results demonstrate that the proposed QF scheduling method satisfies different types of fairness among users and can adjust the degree of fairness among them. The antenna trade-off scheme combined with QF scheduling can improve the probability of QoS-guaranteed transmission when supporting different QoS groups.

• 한국어병학회지
• /
• 제24권2호
• /
• pp.95-102
• /
• 2011

Normalized resistance interpretation (NRI) analysis for tetracycline was applied to generate information on the epidemiological cut-off value for Vibrio ichthyoenteri isolated from diseased olive flounder (Paralichthys olivaceus) larvae. Thus, 42 strains of V. ichthyoenteri were used to determine minimum inhibitory concentration (MIC) values of tetracycline using Etest. Also, 11 tetracycline resistance related genes were investigated by PCR method. Most tetracycline-resistant strains harbored both tetB and tetM with a few exceptions. NRI-derived mean and 2 SD above the mean of theoretical normal distributions of susceptible isolates were 0.33 mg/L and 1.66 mg/L, respectively. The epidemiological cut-off value for V. ichthyoenteri from the calculations could be set to S ${\leq}$ 2 mg/L. Of the 42 strains, 15 were classified as non-wild type (NWT), and MIC values of the NWT strains vary regardless of tetB and tetM detection, suggesting that there may be other mechanisms involved in tetracycline resistance in this Vibrio species.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1410-1412
• /
• 2002

TFT의 게이트 전극을 형성하기 전에 소오스/드레인 이온 주입과 ELA를 수행함으로써 이온 주입에 의해 발생하는 결정 결함을 줄이는 새로운 poly-Si TFT를 제안한다. 한번의 ELA 공정을 통해서 채널 실리콘 박막의 결정화와 소오스/드레인의 불순물 활성화를 동시에 이루어 접합부의 결함을 치유하였고, 이온 주입에 의해서 비정질화된 소오스/드레인 실리콘과 채널 비정질 실리콘의 용융조건 차이를 이용하여 소오스/드레인 접합부에 실리콘 그레인의 수평성장을 유도하였다. 제안된 소자는 기존의 소자(이동도 : 86 $cm^2/V{\cdot}S$, ON/OFF 전류비 $6.1{\times}10^6$)에 비해 우수한 특성(이동도 : 171 $cm^2/V{\cdot}S$, ON/OFF 전류비 $4.1{\times}10^7$)을 나타내었다. LDD나 off-set 구조 없이도 소오스/드레인 접합부의 결함이 완전히 제거되어 누설전류가 감소하였고 소오스/드레인 접합부 결함이 있던 자리에 1 ${\mu}m$ 이상의 수평성장 그레인이 위치함으로써 ON 전류도 증가하여 ON/OFF 전류비가 크게 개선되었다.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.22-29
• /
• 2002

The coated paper was greatly affected by the basic physical properties of the binder as well as the amount of the coating formula. High glass transition temperature (Tg) of the styrene-butadiene (SB) latex, selected as the binder in our study, gave the high stiffness to the coated paper, but lowered the binding force and print gloss. The average particle size of the SB latex also greatly affected to the coated paper so that the smaller particle size improved the rheological property of the coating formula and increased the binding force and print gloss. Another property of the SBR latex, gel content, was important because when its value was small, the latex was easily deformed at the high temperature and increased air permeability to the coated paper. Therefore, the lower gel content consequently resulted in the higher blistering resistance, especially in the web paper. The larger portion of the SB latex in the coated formula improved the binding force and print gloss, but decreased the ink set-off and ink-trapping to the coated paper. The heavier coating improved optical properties such as opacity, paper gloss and paper smoothness, to the coated paper.