• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.63-69
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matche with the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion Bulge Test underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2015

In this study we demonstrate ultrahigh-resolution spectral domain optical coherence tomography (UHR SD-OCT) with a linear-wavenumber (k) spectrometer, to accelerate signal processing and to display two-dimensional (2-D) images in real time. First, we performed a numerical simulation to find the optimal parameters for the linear-k spectrometer to achieve ultrahigh axial resolution, such as the number of grooves in a grating, the material for a dispersive prism, and the rotational angle between the grating and the dispersive prism. We found that a grating with 1200 grooves and an F2 equilateral prism at a rotational angle of $26.07^{\circ}$, in combination with a lens of focal length 85.1 mm, are suitable for UHR SD-OCT with the imaging depth range (limited by spectrometer resolution) set at 2.0 mm. As guided by the simulation results, we constructed the linear-k spectrometer needed to implement a UHR SD-OCT. The actual imaging depth range was measured to be approximately 2.1 mm, and axial resolution of $3.8{\mu}m$ in air was achieved, corresponding to $2.8{\mu}m$ in tissue (n = 1.35). The sensitivity was -91 dB with -10 dB roll-off at 1.5 mm depth. We demonstrated a 128.2 fps acquisition rate for OCT images with 800 lines/frame, by taking advantage of NVIDIA's compute unified device architecture (CUDA) technology, which allowed for real-time signal processing compatible with the speed of the spectrometer's data acquisition.

• Journal of Korean Academy of Nursing
• /
• v.48 no.3
• /
• pp.289-297
• /
• 2018

Purpose: This study aimed to evaluate the usefulness of a behavioral cue checklist (BCC) containing 17 items developed by Wilkes et al. (2010) for identifying potentially violent patients in emergency departments. Methods: This was a prospective observational study to evaluate the usefulness of the Korean version of a BCC (K-BCC) as an assessment tool for predicting patient violence in emergency departments, and was conducted over 4 weeks in a regional emergency medical center located in B City. A total of 1,324 patients were finally analyzed. Results: Logistic regression analysis was performed to investigate whether each item of the K-BCC predicts violence, and a parsimonious set of 8 statistically significant items was selected for the tool. Receiver operating characteristic analysis of the BCC showed that the area under the curve was .97 (95% confidence interval: .94~1.0). The sensitivity, specificity, positive predictive value, and negative predictive value at the cut-off score of 2 were 75.6%, 98.9%, 68.2%, and 99.2%, respectively. Conclusion: The K-BCC was found to be useful in predicting patient violence toward emergency department staff. This tool is simple, and fast to use and can play a significantly role identifying potentially violent patients. Owing to this advance identification, this tool can be helpful in preventing the potential for violence from manifesting as violent behaviors.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.75-80
• /
• 2013

Background: Breast cancer is the most common cancer diagnosed in females in Sri Lanka and early detection can lead to reduction in morbidity and mortality. Aim: To evaluate selected aspects of breast cancer early detection services implemented through well woman clinics (WWCs) in the Gampaha District. Methods: The study consisted of two components. A retrospective descriptive arm assessed clinical breast examination (CBE) coverage of target age group women (TGW) of 35-59 years in all the WWCs in Gampaha district over 2003-2007. A cross sectional descriptive study additionally assessed quality of breast cancer early detection services. The Lot Quality Assurance Sampling (LQAS) technique was used to decide on the lot size and threshold values, which were computed as twenty and six clinics. Checklists were employed in assessing coverage, physical facilities and clinic activities. Client satisfaction on WWC services was assessed among 200 TGW attending 20 WWCs using an interviewer-administered questionnaire. Results: CBE coverage in the Gampaha district increased only from 1.1-2.2% over 2003-2007. With regard to physical facilities, the number of clinics that were rated substandard varied between 7-18 (35-90%). The items that were lacking included dust bins, notice boards, stationary, furniture and linen, and cleanliness of outside premises and toilets. With regard to clinic activities, punctuality of staff, late commencement of clinics, provision of health education, supervision, CBE and breast self-examination (BSE) were substandard in 7-20 clinics (35-100%). Client satisfaction for WWC services was 45.2% (IQR: 38.7-54.8%) and only 11% had a score of ${\geq}70%$, the cut off set for satisfaction. Conclusions: Breast cancer early detection service coverage in the Gampaha district remained low (2.2%) in 2007, 11 years after commencing WWCs. All 20 clinics were substandard for overall CBE and BSE.

• Korean Journal of Agricultural Science
• /
• v.42 no.1
• /
• pp.53-61
• /
• 2015

Development of highly efficient and energy-saving tractors has been one of the issues in agricultural machinery. For design of such tractors, measurement and analysis of load on major power transmission parts of the tractors are the most important pre-requisite tasks. Objective of this study was to perform pre-processing procedures before effective analysis of load data of agricultural tractors (30, 75, and 82 kW) during major field operations such as plow tillage, rotary tillage, baling, bale wrapping, and to select the suitable pre-processing method for the analysis. A load measurement systems, equipped in the tractors, were consisted of strain-gauge, encoder, hydraulic pressure, and radar speed sensors to measure torque and rotational speed levels of transmission input shaft, PTO shaft, and driving axle shafts, pressure of the hydraulic inlet line, and travel speed, respectively. The entire sensor data were collected at a 200-Hz rate. Plow tillage, rotary tillage, baling, wrapping, and loader operations were selected as major field operations of agricultural tractors. Same or different farm works and driving levels were set differently for each of the load measuring experiment. Before load data analysis, pre-processing procedures such as outlier removal, low-pass filtering, and data division were performed. Data beyond the scope of the measuring range of the sensors and the operating range of the power transmission parts were removed. Considering engine and PTO rotational speeds, frequency components greater than 90, 60, and 60 Hz cut off frequencies were low-pass filtered for plow tillage, rotary tillage, and baler operations, respectively. Measured load data were divided into five parts: driving, working, implement up, implement down, and turning. Results of the study would provide useful information for load characteristics of tractors on major field operations.

• Korea Journal of Hospital Management
• /
• v.13 no.3
• /
• pp.69-93
• /
• 2008

Rising healthcare cost is a global phenomenon that justifies governments' introduction of 'incentive regulation' plan for the improvement of hospital efficiency. A number of previous studies tried to evaluate the efficiency of healthcare organization by using Data Envelopment Analysis(DEA), a common efficiency benchmarking method. However, there is a concern that this kind of efficiency evaluation could induce "quantity-quality trade-off". Moreover, as quality aspect is especially important in terms of 'effectiveness' of health care, it should be considered in efficiency evaluation of healthcare organization. A number of different models were tried so far to incorporate quality aspect into DEA, however, none is universally recognized as a standard. Thus, in this study, previous quality-incorporating DEA models were categorized into 6 types according to the way of incorporating quality aspect, and strengths and limitations of each type were reviewed with a set of artificial data as an example. Based on this review, a new quality-incorporating efficiency evaluation model, named Quality-adjusted output DEA(QAO-DEA), was suggested. As an exploratory empirical analysis, technical efficiency of human resource were measured with different quality-incorporating DEA models, using 2004 data from National University Hospitals. In conclusion, Quality-adjusted output DEA(QAO-DEA) model seems to be one of the most desirable alternatives to incorporate quality aspect in efficiency evaluation of hospital, and deserves the consideration as a policy tool to induce simultaneous improvement of both efficiency and quality.

• Journal of Korea Game Society
• /
• v.13 no.3
• /
• pp.77-84
• /
• 2013

We introduce a new framework for making spatial augmented reality contents fast and with low cost. The framework allows us to make projection-based augmented reality using off-the-shelf webcams and projectors. Contents producers can make a projection-based augmented reality contents easy and fast by setting a webcam and a projector and then controlling user interfaces of our framework. Since most of previous solutions are expensive and it is too difficult that the producers apply augmented reality techniques themselves, the framework helps them to concentrate contents. Once we set a webcam and a projector correctly, our framework projects a virtual object contents according to the manipulation of a trackable real object. As a result we can see realistic augmented reality contents.

• Journal of the Korean Geographical Society
• /
• v.36 no.4
• /
• pp.434-443
• /
• 2001

Differing from the existing method to optimize the statistical proximity, the new optimization method was developed to maximize the spatial proximity among the unit areas of choropleth map. 25 choropleth maps were made using 5 classification methods(maximum BEI, maximum TEI, equal interval, natural break, n-tile) for 5 classes(3∼7) and were analyzed to elucidate the effectiveness of classification methods on the basis of 3 evaluation indeces (TEI, BEI, $C_{F}$). The results from the maximum TEI and maximum BEI were evaluated as relatively stable and effective compared to those from other classification methods. But they showed the opposite trends owing to the trade-off relationships. Meanwhile, the resets from the natural break method got higher marks, which was also identified through the analysis using a new $alpha$-index.x.

• Journal of Korean Home Economics Education Association
• /
• v.13 no.2
• /
• pp.59-72
• /
• 2001

This study investigated the effects of factors on the academic achievement in the 'Food and Nutrition' units in the Practical Arts : factors such as gender. family and home environment. and participation in. interest in attitude toward. and encouragement by mother in meal management. The factors were surveyed for 453 grade four elementary students (226 boys and 227 girls) and their mothers in Busan. The extent of participation in meal management. of interest. of attitude. and of the mother's encouragement was broken into three groups. Upon completing the 'Table Setting with Fruits'unit. the students'academic achievements were evaluated and compared according to these factors. The results were as follows : 1. The girls participated in meal management more frequently than the boys. Most of the children exhibited a high interest. the girls showing a higher interest than the boys. Both sexes showed a positive attitude toward meal management. Mothers encouraged girls more often than boys to manage meals at home. 2. The academic achievement of the girls was higher than that of the boys. Children living in apartments and more affluent environments scored higher than those who were less well off and living in independent households. 3. Those who frequently participated in meal management. exhibited a high interest. and showed a positive attitude towards it. achieved higher scores than those who showed a lower interest. less positive attitude. and only occasionally participated in it. 4. Those who were encouraged frequently to manage meals by their mother showed a tendency to score higher than those who wee encouraged only occasionally. In conclusion. academic achievement in the 'Food and Nutrition'units in Practical Arts was affected by gender. domestic economy. type of residence. participation in meal management in the home. interest in it. attitude toward it. and encouragement in participation by the other. Thus academic achievement in food. nutrition. and meal management is dependent upon both the school and home environments. Children would learn more in the 'Food and Nutrition'units when their parents set a positive and encouraging environment in the home.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.94-94
• /
• 2008

We have performed simulation for Junction Field Effect Transistor(JFET) using Silvco to improve its electrical properties. The device structure and process conditions of Si-control JFET(Si-JFET) were determined to set its cut off voltage and drain current(at Vg=0V) to -0.5V and $300{\mu}A$, respectively. From electrical property obtained at various implantation energy, dose, and drive-in conditions of p-gate doping, we found that the drive in time of p-type gate was the most determinant factor due to severe diffusion. Therefore we newly designed SiGe-JFET, in which SiGe layer is to epitaxial layers placed above and underneath of the Si-channel. The presence of SiGe layer lessen the p-type dopants (Boron) into the n-type Si channel the phenomenon would be able to enhance the structural consistency of p-n-p junction. The influence of SiGe layer will be discussed in conjunction with boron diffusion and corresponding I-V characteristics in comparison with Si-control JFET.