• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.333-341
• /
• 2022

Magnetoelectric (ME) composites are comprised of magnetostrictive and piezoelectric phases. Lots of theoretical and experimental works have been done on ME composites in the last couple of decades. The output performance of ME composites has been enhanced by optimizing the constituent phases, interface layer, dimensions of the ME composites, different operating modes, etc. However, the detailed information about the characterization of ME coupling in ME composites is not provided yet. Therefore, in this tutorial paper, we are giving an insight into the details of measurements of ME voltage coefficient of ME composites both at off-resonance and resonance conditions. A symmetric type Gelfenol/PMN-PZT/Gelfenol ME composites were fabricated by sandwiching (011) 32-mode PMN-PZT single crystal between two Galfenol plates by epoxy bonding are used for the example of ME coupling measurement. The details about the experimental setup used for the measurement of ME voltage coefficient are provided. Furthermore, a step-by-step measurement of ME voltage coefficient using computerized program is demonstrated. We believe the present experimental measurement details can help readers to understand the concept of ME coupling and its analysis.

• Proceedings of the KSMRM Conference
• /
• 2007.10a
• /
• pp.26-26
• /
• 2007

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.12
• /
• pp.897-901
• /
• 2010

A silencer has been widely used for the purpose of suppressing the noises propagated from duct of air conditioning system. The absorption type silencer is usually applied to reduce the noise with high frequency bandwidth. On the order hand, the resonance type silencer is applied to reduce the noise with low-middle frequency bandwidth. The insertion loss of silencer is measured in the reverberation room. The cut-off frequency of reverberation room is 100 Hz. The insertion loss of absorption type silencer is more larger than that for resonance type silencer regardless of changing the flow velocity.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.205-216
• /
• 1992

Distribution of electric fields of surface plasmons at resonance and off-resonance angles were calculated and compared. As applications of surface plasmon resonance, (1) optical constants of ZnS films overcoated on Ag films were measured as the thickness of ZnS films increased, (2) four surface plasmon resonances distributed spatially due to the different thickness of SiO thin films overcoated on Ag films were observed in a picture frame by employing diverging waves of incidence, and (3) patterns of SiO thin films such as a grating and a character "가" overcoated on Ag films were measured by employing collimated waves of incidence.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.405-408
• /
• 1990

This paper is study on resonance type high-frequency inverter using self turn-off devices. The power conversion circuits adopt full-bridge of voltage-fed type. IN the circuit analysis, resistance load was used to estimate of characteristic.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.347-348
• /
• 2012

An approach to design and analyze an RCD snubber for flyback converters will be introduced. The resonance coordinate provides an easy way to understand the transient period of the switch turn-off and helps to design and analyze the RCD snubber easily. An example of analyzing RCD snubber losses for 40W prototype will be given and experimented to show the effectiveness of the suggested method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.2
• /
• pp.181-184
• /
• 2017

This study analyzes the turn-on and turn-off transients of a metal-oxide-semiconductor field-effect transistor (MOSFET) with high-switching frequency systems. In these systems, the voltage distortion becomes serious at the output terminal of a Vienna rectifier by the turn-off delay of the MOSFET. The current has low-order harmonics through this voltage distortion. This paper describes the transient of the turn-off that causes the voltage distortion. The algorithm for reducing the sixth harmonic using a proportional-resonance controller is proposed to improve the current distortion without complex calculation for compensation. The reduction of the current distortion by high-switching frequency is verified by experiment with the 2.5-kW prototype Vienna rectifier.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.1
• /
• pp.76-84
• /
• 2013

The renewable energy sources is raising for use of grid connected systems, for which higher power quality requirements are being issued. A grid connected converter requires a LC-filter stage, this one is lightly damped for efficiency constraints. Hence, it is subject to resonance if excited by the converter current harmonics or pre-exciting grid voltage harmonics. In this paper, an active damping technique employing notch filter for damping of the resonance frequency is introduced. This technique doesn't need to additional sensors. In addition, it is simple to apply for various systems. Monitoring of the resonance frequency ensures the stable operation of the proper connection and disconnection of the grid. This paper proposes the estimating method of a resonant frequency to determine the cut-off frequency of the notch filter. This method is validated by both simulation and experimental results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.569-579
• /
• 2004

The lift-off characteristics of lifted laminar propane jet flames highly diluted with nitrogen are investigated introducing acoustic forcing with a fuel tube resonance frequency. A flame stability curve is obtained according to forcing strength and the nozzle exit velocity for N2 diluted flames. Flame lift-off behavior is globally classified into three regimes; 1) a weakly varying partially premixed behavior caused by a collapsible mixing for large forcing strength, 2) a coexistent behavior of the edge flame and a weakly varying partially premixed behavior for moderate forcing strength, and 3) edge flame or triple flame behavior for small forcing. It is shown that the laminar lifted flame with forcing affects flame lift-off behavior considerably, and is also clarified that the flame characteristic of flame base is well described with the penetration depth of the degree of mixing, ${\gamma}$$\_$$\delta$/. It is also confirmed that the weakly varying partially premixed flame caused by a collapsible mixing fur large forcing strength behaves as that just near flame blow-out in turbulent lift-off flame.

• Journal of the Korean Magnetic Resonance Society
• /
• v.12 no.2
• /
• pp.81-88
• /
• 2008

Solid HETCOR (Hetero-Correlation) requires homo-dipolar decoupling between proton spins during the evolution and the mixing period in 2D-NMR. There are two different ways of achieving it with pulse sequences. One is based on the multiple pulse (MP) sequence where thousands of intense radio frequency (rf) pulses are used to remove the homo-dipolar interaction between protons. The other is utilizing the so-called Lee-Goldburg (LG) off-resonance scheme where a continuous rf-irradiation is used. In this report, the advantage of one technique to the other, is analyzed. LG version is evaluated better in S/N and easier in setup procedure with the same experimental time.