• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.574-579
• /
• 2000

In this study. an off-design performance prediction program for centrifugal pumps is developed. To estimate the losses in an impeller flow passage, two-zone model and two-element in series(TEIS) model are used. At impeller exit. the mixing process occurs with an increase in entropy. In two-zone model. there are both primary zone and secondary zone for an isentropic core flow and an average of all non-isentropic streamtubes respectively. The level of the core flow diffusion in an impeller was calculated by using TEIS model. While internal losses in an impeller an automatically estimated by using the above models, some empirical correlations far estimating external losses. far example, disk friction loss, recirculation loss and leakage loss are used. In order to analyze the vaneless diffuser flow. the momentum equations for the radial and tangential directions are used and solved together with continuity and energy equations.

• International Journal of Fluid Machinery and Systems
• /
• 제10권3호
• /
• pp.218-226
• /
• 2017

Severe radial thrust under off-design operating conditions can be a harmful factor for centrifugal pumps. In the present work, effects of geometry of a double volute casing on the hydrodynamic performance of a centrifugal pump have been investigated focusing on off-design conditions. Three-dimensional steady Reynolds-averaged Navier-Stokes analysis was carried out by using shear stress transport turbulence model. Numerical results for the hydrodynamic performance of the centrifugal pump were validated compared with experimental data. The hydraulic efficiency and radial thrust coefficient were used as performance parameters to evaluate the hydrodynamic characteristics of the centrifugal pump. The cross-sectional area ratio of the volute casing, the expansion coefficient of the rib structure, the distance between the rib starting point and volute entrance, and radius and width of the volute entrance, and length of the rib structure, were selected as geometric parameters. Results of the parametric study show that the performance parameters are significantly affected by the geometric variables and operating conditions. Optimal configurations of the double volute casing based on the design of experiments technique show outstanding performance in terms of the efficiency and radial thrust coefficient.

• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.91-99
• /
• 2020

액체로켓엔진은 발사 전까지 성능의 입증을 위해 많은 시험을 거친다. 점화 및 시동 조건 설정을 위한 시험이나 정격 조건에서의 성능시험을 통해 설계 성능을 검증한다. 하지만 개발과정에서 여러 작동조건의 시험을 통해 탈설계 조건에서의 성능확인이 필요하며 이는 엔진 개발기간에 영향을 준다. 엔진 내의 제어 밸브의 개도를 변화시키는 엔진 성능 시험과 함께 엔진으로 공급되는 추진제의 조건을 변경시켜 탈설계 성능 시험을 수행한다. 본 논문에서는 나로우주센터에 설치되어 있는 한국형발사체 액체로켓 엔진 시험설비에서 수행된 엔진 시험 운용 결과를 기초로 하고 있으며, 시험 대상체에 공급되는 추진제의 압력과 온도의 변화로 터보펌프의 입구 조건을 변경시키는 탈설계 조건 성능시험을 위한 시험설비 운용에 관한 내용을 기술하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.413-418
• /
• 2001

Emergency shut-on valve was developed to shut off natural gas at the front of a gas meter in the house. The shut-off flow rate and differential pressure of this valve was controlled by adjusting the distance between the spool and magnet. Also the spool shape was an important factor in the performance of this valve. The experimental and computational results will be useful for the design having better performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.658-663
• /
• 2001

In this study, the axial-compressor design and performance/flow analysis program is developed. A mean-line analysis was used to determine optimum arrangement of overall geometry and its off-design performance is predicted by stage-stacking method. Three dimensional blade shape is generated using radial equilibrium equation and vortex methods. Various blade shape is generated and their performance is compared. Finally the quasi-three dimensional flow analysis is applied to investigate the detailed flow phenomena.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1144-1153
• /
• 2002

A hybrid performance prediction method is proposed in the present study. A channel diffuser is divided into four subregions: vaneless space, semi-vaneless space, channel, and channel exit region. One-dimensional compressible core flow and boundary layer calculation of each region with an incidence loss model and empirical correlation of residuary pressure recovery coefficient of a channel predict the performance of diffusers. Three channel diffusers are designed and tested for validating the developed prediction method. The pressure distributions from an impeller exit to the channel diffuser exit are measured and discussed for various operating conditions from choke to nearly surge conditions. The strong non-uniform pressure distribution which is caused by impeller-diffuser interaction is obtained over the vaneless and semi-vaneless spaces. The predicted performance shows good agreement with the measured performance of diffusers at a design condition as well as at off-design conditions.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.58-67
• /
• 2002

Since the inception of off-line quality control, it has drawn a particular attention from research community and it has been implemented in a wide variety of industries mainly due to its extensive applicability to numerous real situations. Emphasizing design issues rather than control issues related to manufacturing processes, off-line quality control has been recognized as a cost-effective approach to quality improvement. It mainly consists of three design stages: system design, parameter design, and tolerance design which are implemented in a sequential manner. Utilizing experimental designs and optimization techniques, off-line quality control is aimed at achieving product performance insensitive to external noises by reducing process variability. In spite of its conceptual soundness and practical significance, however, off-line quality control has also been criticized to a great extent due to its heuristic nature of investigation. In addition, it has also been pointed out that the process optimization procedures are inefficient. To enhance the current practice of off-line quality control, this study proposes an integrated optimization model by utilizing a well-established statistical tool, so called response surface methodology (RSM), and a tolerance - cost relationship.

• 대한전자공학회논문지SP
• /
• 제37권4호
• /
• pp.56-64
• /
• 2000

본 논문에서는 패턴인식의 문제에서 배경이 물체에 겹치지 않는 영상일 때 잡음에 대한 안정성, 피크의 크기와 광효율의 조건에 대한 trade-off를 통해 필터를 설계하는 방법에 대해 언급한다. 필터를 설계하기위해 신호대 잡음비, 출력의 최대값대 출력에너지비, 광효율의 세가지 다른 조건을 사용한다. 필터의 성능을 시험하기 위해 여러 형태의 잡음과 필터 계수에 대해 컴퓨터 모의실험을 실시한다. 배경이 물체에 겹치지 않는 영상에 대해 기존의 필터보다 우수한 성능을 얻을 수 있다.

• 대한조선학회논문집
• /
• 제61권2호
• /
• pp.125-134
• /
• 2024

The Safe Operating Envelope (SOE) combined with Short-Take-Off and Vertical Landing (STOVL) performance is an essential consideration of a light aircraft carrier for design of hull shape with excellent seakeeping performance in terms of naval air operations as well as traditional naval ship missions such as Transit and Patrol (TAP), and Replenishment at Sea (RAS) and so on. A variety of procedures are systematically combined to determine SOE considering rather complicated missions associated with operation of aircraft onboard. The evaluation of take-off and landing safety missions onboard should consider wind effect on deck and severer seakeeping indices and standards compared with conventional naval ships. In order to support take-off and landing missions, various support activities of the crews are required. So, additional evaluation is needed for indicators such as MSI(Motion sickness Index) and MII(Motion Induced Interruptions), which are quantitative indicators of work ability that appear as a result of motion response. In this study, a standard procedure is developed including the seaworthiness performance indicators, standards, and evaluation procedures that should be considered during design of STOVL aircraft carrier. Analysis results are discussed in terns of air-wake on deck as well as seakeeping indices associated with design parameter changes in view of conceptual design of a light aircraft carrier.

• 한국항공우주학회지
• /
• 제47권3호
• /
• pp.195-203
• /
• 2019

극초음속 영역에서 운용되는 스크램제트엔진의 흡입구는 엔진 전체 성능에 직접적으로 연관되어 있으므로 개발에 앞서, 다양한 조건에서의 성능 특성 분석이 필수적이다. 본 연구에서는 축대칭 내부 압축형 흡입구인 Busemann과 외부 압축형 흡입구 형상을 설계하고, 설계점 및 탈설계점에서의 전산해석을 수행하였다. 해석결과를 토대로, 마하수와 받음각에 대한 극초음속 흡입구의 전반적인 성능 특성을 파악하였다. Busemann 흡입구는 $2^{\circ}$의 Truncation 각에 따라 흡입구의 길이를 단축하여도 성능 저하가 미미하였으며 탈설계 마하수에서는 흡입구 성능이 우수하였으나, 받음각이 있는 경우 시동 특성이 크게 저하되었다.