• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.36-46
• /
• 2021

With an increasing trend toward high-rise modular construction, the simultaneous use of tower cranes at a modular construction site has recently been observed. Tower crane layout planning (TCLP) has a significant effect on cost, duration, safety and productivity of a project. In a modular construction project, particularly, poor decision about the layout of tower cranes is likely to have negative effects like additional employment of cranes and redesign, which will lead to additional costs and possible delays. It is, therefore, crucial to conduct thorough inspection of field conditions, lifting materials, tower crane capacity to make decisions on the layout of tower cranes. However, several challenges exist in planning for a multi-crane construction site in terms of safety and collaboration, which makes planning with experience and intuition complicated. This paper suggests a multi-objective optimization model for selection of the number of tower cranes, their models and locations, which minimizes cost and conflict. The proposed model contributes to the body of knowledge by showing the feasibility of using multi-objective optimization for TCLP decision-making process with consideration of trade-offs between cost and conflict.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.456-461
• /
• 2010

We investigated the In-based ohmic contacts on Nitrogen-face (N-face) n-type GaN, as well as Ga-face n-type GaN, for InGaN-based vertical Light Emitting Diodes (LEDs). For this purpose, we fabricated Circular Transfer Length Method (CTLM) patterns on the N-face n-GaN that were prepared by using a laser-lift off method, as well as on the Ga-face n-GaN that were prepared by using a dry etching method. Then, In/transparent conducting oxide (TCO) and In/TiW schemes were deposited on the CTLM in order for low resistance ohmic contacts to form. The In/TCO scheme on the Ga-face n-GaN showed high specific contact resistance, while the minimum specific contact resistance was only 3${\times}$10$^{-2}$ $\Omega$-cm$^{2}$ after annealing at 300${^{\circ}C}$, which can be attributed to the high sheet resistance of the TCO layer. In contrast, the In/TiW scheme on the Ga-face n-GaN produced low specific contact resistance of 2.1${\times}$10$^{5}$ $\Omega$-cm$^{2}$ after annealing at 500${^{\circ}C}$ for 1 min. In addition, the In/TiW scheme on the N-face n-GaN also resulted in a low specific contact resistance of 2.2${\times}$10$^{-4}$ $\Omega$-cm$^{2}$ after annealing at 300${^{\circ}C}$. These results suggest that both the Ga-face n-GaN and N-face n-GaN.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.163-179
• /
• 2020

With the expansion of platform-based taxi service, mobility and convenience of users are getting better. However, due to profitability problem, marginalized areas in the supply of the service are expected to appear. As such, this study analyzed spatial marginalization of taxi service caused by imbalance in supply and demand during the night-time when public transportation service is suspended. According to hot-spot analysis of taxi, outskirt of a city and residential areas showed high vacancy and greater number of drop-offs compared to the number of pick-ups. On the contrary, they were confirmed low in the center and sub-centers of a city. Centrality analysis also showed a similar pattern with hot-spot analysis. Due to this, drivers may refuse to pick up a customer bound for an area with lower out-degree centrality compared to in-degree centrality as it might be difficult for the drivers to pick up another customer after dropping off the current customer. Thus, customers may need to wait for a taxi for a longer time. For this reason, improvement in spatial marginalization caused by mismatch of supply and demand is required. Also, the outcome of this study is expected to be utilized as a basic data.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.6
• /
• pp.823-833
• /
• 2020

The Manila clam Ruditapes philippinarum, is an important marine bivalve that is widely distributed along the west and north coasts of South Korea. It has been used in a variety of Korean foods owing to its superior umami taste. In the present study, we developed a flavoring with an excellent sensory preference from Manila clam using extrusion cooking processing. Optimization of extrusion cooking conditions was performed using response surface methodology (RSM). Barrel temperature (X1, 140-160℃) and screw speed (X2, 400-560 rpm) of the extruder were chosen as independent variables. The dependent variable was overall acceptance (Y, points). The estimated optimal conditions were as follows: overall acceptance (Y): X1=140℃ and X2=560 rpm. The indicated value of the dependent variable overall acceptance (Y) under the optimal conditions was 8.94 points, which was similar to the experimental value (8.82 points). Overall acceptance of the Manila clam flavoring was related to its umami and Manila clam tastes. The electronic nose and tongue results successfully segregated different clusters of the samples between the lowest and highest sensory scores. The sample with the highest sensory score had higher sourness, umami, and sweetness intensities, and the lowest sensory scored sample showed more off-flavor compounds.

• The Journal of Industrial Distribution & Business
• /
• v.13 no.6
• /
• pp.39-49
• /
• 2022

Purpose: As part of these efforts, in-depth research is needed on efficient and practical utilization of underground spaces and underground shopping malls. In addition, efforts are being made to find effective alternatives to various problems currently occurring in underground shopping malls, but it is not easy. In addition, the development entity and the maintenance entity are different from each other, and the management is not unified, making it difficult to maintain underground shopping malls. From this point of view, it can be said that it is time to actively and specifically discuss ways to revitalize underground shopping malls. Data and methodology: In the domestic distribution environment, traditional markets and shops are stagnating due to rapid changes in consumption patterns, such as the spread of large companies with advanced distribution techniques such as hypermarkets, shopping malls, and SCM, the rapid increase in Internet and home shopping, and the importance of convenience for young consumers. In order to revitalize underground shopping malls, it is necessary to strengthen the organization and self-rescue efforts of merchants' associations, change consciousness through merchant education, change to specialized markets, find nuclear stores and representative restaurants, and support the hardware sector. Results: The connection of underground shopping malls in each region of the country, where commercial districts are separated from each other, will also play an important role in reviving the function of the city in the future. To do this, it is first necessary to connect underground shopping malls that have been cut off. In other words, connection between connectable underground shopping malls should be promoted. Of course, long-term projects should be promoted step by step, and many consultations should be made on how to connect with the ground for each local government. Conclusion: This is because in the future, the underground space cannot just be a walking place, but another space of the Korean Wave where you can experience satisfying the five senses. K-shopping Hallyu content can be created by creating a characteristic story for each underground shopping mall in the city, permanently this story-oriented event, and creating a safe and elegant environment. If there is a story, so-called "Senomi Shopping" will be possible. A new Korean Wave will be created that can satisfy "the fun of writing, the fun of seeing, and the fun of feeling" at the same time.

• Land and Housing Review
• /
• v.13 no.3
• /
• pp.93-106
• /
• 2022

Ventilation plays an important role in controlling indoor air quality. Due to the recent spread of infectious diseases such as COVID-19 and with people spending more time indoors, there's been increased attention on the importance of ventilation performance. In many countries, ventilation is regulated by airflow rates and the number of air changes per hour (ACH). However, airflow rates and ACH alone do not provide an accurate account of actual indoor pollutant removal and ventilation uniformity in a space. This study looked into the ventilation performance of an actual residential unit using several sampling points instead of basing it off of airflow and air change rates. Literature review was used to derive relevant influencing factors and the tracer gas dilution method was used for the field test. The study measured air velocity, age of air, and ventilation efficiency at several locations and compared them to the average value at the center of the test space to determine the differences in ventilation performance at the selected measurement points. The study showed that different sampling locations resulted in different ventilation values. Findings of this study will be used to develop an experimental procedure for evaluating indoor ventilation performance of actual residential spaces.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.297-303
• /
• 2021

When sound waves propagate over long distances in shallow water, measured transmission loss is greater than predicted one using underwater acoustic model with the Rayleigh reflection model due to inhomogeneity of the bottom. Accordingly, the US Navy predicts sound wave propagation by applying the empirical formula-based High Frequency Bottom Loss (HFBL) model. In this study, the measurement and analysis of transmission loss was conducted using mid-frequency (2.3 kHz, 3 kHz) in the shallow water of the East Sea in summer. BELLHOP eigenray tracing output shows that only sound waves with lower grazing angle than the critical angle propagate long distances for several kilometers or more, and the difference between the predicted transmission loss based on the Rayleigh reflection model and the measured transmission loss tend to increase along the propagation range. By comparing the Rayleigh reflection model and the HFBL model at the high grazing angle region, the bottom province, the input value of the HFBL model, is estimated and BELLHOP transmission loss with HFBL model is compared to measured transmission loss. As a result, it agrees well with the measurements of transmission loss.

• Molecules and Cells
• /
• v.45 no.12
• /
• pp.886-895
• /
• 2022

Malignant rhabdoid tumor (MRT) is a highly aggressive pediatric malignancy with no effective therapy. Therefore, it is necessary to identify a target for the development of novel molecule-targeting therapeutic agents. In this study, we report the importance of the runt-related transcription factor 1 (RUNX1) and RUNX1-Baculoviral IAP (inhibitor of apoptosis) Repeat-Containing 5 (BIRC5/survivin) axis in the proliferation of MRT cells, as it can be used as an ideal target for anti-tumor strategies. The mechanism of this reaction can be explained by the interaction of RUNX1 with the RUNX1-binding DNA sequence located in the survivin promoter and its positive regulation. Specific knockdown of RUNX1 led to decreased expression of survivin, which subsequently suppressed the proliferation of MRT cells in vitro and in vivo. We also found that our novel RUNX inhibitor, Chb-M, which switches off RUNX1 using alkylating agent-conjugated pyrrole-imidazole polyamides designed to specifically bind to consensus RUNX-binding sequences (5'-TGTGGT-3'), inhibited survivin expression in vivo. Taken together, we identified a novel interaction between RUNX1 and survivin in MRT. Therefore the negative regulation of RUNX1 activity may be a novel strategy for MRT treatment.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.665-672
• /
• 2023

Purpose: Underground utility tunnel is facility that is jointly house infrastructure such as electricity, water and gas in city, causing condensation problems due to lack of airflow. This paper aims to prevent electricity leakage fires caused by condensation by detecting whether the control panel door in the underground utility tunnel is open using a deep learning model. Method: YOLO, a deep learning object recognition model, is trained to recognize the opening and closing of the control panel door using video data taken by a robot patrolling the underground utility tunnel. To improve the recognition rate, image augmentation is used. Result: Among the image enhancement techniques, we compared the performance of the YOLO model trained using mosaic with that of the YOLO model without mosaic, and found that the mosaic technique performed better. The mAP for all classes were 0.994, which is high evaluation result. Conclusion: It was able to detect the control panel even when there were lights off or other objects in the underground cavity. This allows you to effectively manage the underground utility tunnel and prevent disasters.

• Korean Journal of Ichthyology
• /
• v.35 no.1
• /
• pp.50-56
• /
• 2023

This study is the first to report the biometric information between the length and weight relationships (LWR) and seasonal body condition factors (K) of Sebastes zonatus Chen & Barsukov, 1976 and Thamnaconus modestus (Günther, 1877) inhabiting the waters off Ulleung-do and Dokdo. The LWRs in spring and summer, and all seasons combined were highly correlated (r²>0.959), and the regression slopes of LWRs were significantly different between the spring and summer in both species. The body conditions of the two fish were significantly higher during the spring than during the summer, reflecting their fatness in relation to spawning. The results from this study contribute to the understanding of the biology of S. zonatus and T. modestus and provide useful data for the development of conservation and management plans for these species.