• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.135-143
• /
• 2000

Ocean Scanning Multispectral Imager (OSMI) is a payload on the Korean Multi-Purpose SATellite (KOMPSAT) to perform global ocean color monitoring for the study of biological oceanography. HOMPSAT was launched 21 December 1999. The radiometric performance of OSMI is analyzed for various gain settings in the viewpoint of the instrument developer for OSMI calibration and application based on its ground performance data measured before launch. The radiometric response linearity and dynamic range are analyzed and the dynamic range is compared with the nominal input radiance for the ocean and the land. The noise equivalent radiance (NER) corresponding to the instrument radiometric noise is compared with the radiometric resolution of signal digitization (1-count equivalent radiance). The best gain setting of OSMI for ocean monitoring is recommended. This analysis is considered to be useful for the OSMI mission and operation planning, the OSMI image data calibration, and users' understanding about OSMI image quality.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.881-901
• /
• 2016

In this study, a method to compensate the effect of temperature variation on impedance responses which are used for prestress-loss monitoring in prestressed concrete (PSC) girders is presented. Firstly, an impedance-based technique using a mountable lead-zirconate-titanate (PZT) interface is presented for prestress-loss monitoring in the local tendon-anchorage member. Secondly, a cross-correlation-based algorithm to compensate the effect of temperature variation in the impedance signatures is outlined. Thirdly, lab-scale experiments are performed on a PSC girder instrumented with a mountable PZT interface at the tendon-anchorage. A series of temperature variation and prestress-loss events are simulated for the lab-scale PSC girder. Finally, the feasibility of the proposed method is experimentally verified for prestress-loss monitoring in the PSC girder under temperature-varying conditions and prestress-loss events.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.5
• /
• pp.280-287
• /
• 2022

An open rack vaporizer is a facility that vaporizes liquefied natural gas using sea water. When a vaporization efficiency of the open rack vaporizer decreases, liquefied natural gas can leak, which can cause great damage to the facility. Operators have to monitor the operation state of the facility in real-time to prevent the accident. However, operators have visited the site and have checked the state by looking at the value of sensors installed in the open rack vaporizer through indicators. For the safe operation of the open rack vaporizer, a monitoring system is needed to monitor the operation state of the open rack vaporizer in real-time without the need for operators to visit the site. In this paper, we developed a long term evolution based monitoring system to monitor the operation state of the open rack vaporizer. The developed system can monitor the real-time operation state of the open rack vaporizer at a control center far from the facility. For the system development, data transmission infrastructure using long term evolution was built. Afterwards a software was developed to monitor the operation state of the open rack vaporizer in real-time using the transmitted data. Finally, performance evaluation was conducted to confirm that the developed system operated successfully without data transmission delay or data missing.

• Structural Monitoring and Maintenance
• /
• v.4 no.4
• /
• pp.301-329
• /
• 2017

Impedance-based damage detection method has been known as an innovative tool with various successful implementations for structural health monitoring of civil structures. To monitor the local critical area of a structure, the impedance-based method utilizes the high-frequency impedance responses sensed by piezoelectric sensors as the local dynamic features. In this paper, current advances and future challenges of the impedance-based structural health monitoring are presented. Firstly, theoretical background of the impedance-based method is outlined. Next, an overview is given to recent advances in the wireless impedance sensor nodes, the interfacial impedance sensing devices, and the temperature-effect compensation algorithms. Various research works on these topics are reviewed to share up-to-date information on research activities and implementations of the impedance-based technique. Finally, future research challenges of the technique are discussed including the applicability of wireless sensing technology, the predetermination of effective frequency bands, the sensing region of impedance responses, the robust compensation of noise and temperature effects, the quantification of damage severity, and long-term durability of sensors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.898-905
• /
• 2019

As the positive feedback between the absorption of chromophoric dissolved organic matter (CDOM) and acceleration of ice melt can impact the aquatic biota and dynamic heat budget, long-term monitoring of the CDOM variation in the polar ocean is necessary. However, the monitoring of CDOM is not easy because of harsh weather and difficult access, especially in the Antarctic Ocean. Therefore, the purpose of this study was to find a suitable long-term monitoring site for CDOM variation; we selected Maxwell Bay and Marian Cove at Sejong Base and horizontal and vertical distributions of CDOM were measured. After a 72 hr time-series measurement test of the CDOM variation at Sejong Dock and Sejong Cape in Maxwell Bay, Sejong Dock was selected, as it does not haveland discharge effects. The seasonal variation of CDOM was evident and the average CDOM concentration of Maxwell Bay was comparable with the adjacent sea. The CDOM at Sejong Dock from February to November 2010 was the highest in the fall and winter and the lowest during spring and summer. Thus, based on our one-year CDOM data, we suggest that Sejong Dock in Maxwell Bay is suitable for long-term monitoring of CDOM as an indicator of photochemical and biological environmental change and an important factor in determining the heating budget in the Antarctic Ocean.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.5
• /
• pp.142-147
• /
• 2008

The cases of using new methods of big blocks are largely increasing on Recent large-scale bridge structures. So the accurate data of responses of bridges following environmental causes are required to be quickly recorded in order to predict. For this reason described above, the research on measuring system should be conducted for more knowledge of the details on application and stability of new methods. In this study, the new health monitoring system that can monitor the real behavior and damages of the bridge during all processes of construction is presented by analyzing cases of domestic and overseas bridge health monitoring system, and applied methods of following bridges.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.139-146
• /
• 1998

This paper introduces a network system for monitoring coastal oceanographic data. The network system consists of three parts such as the buoy to observe oceanographic data, the local site to collect data transferred from buoys, and the host site to construct the oceanographic data-base and to share the information for monitoring coastal oceanographic data. The buoy has a one-board microcomputer to manage and to acquire coastal environment data in real-time. A wireless and wire communication technique is employed in order to transfer data measured by buoys and to link local and host sites, respectively. In measuring coastal environment data, this system shows more cost-effective way than the presents conventional. In addition, the realtime monitoring system continuously from various sites with the network systems.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.463-477
• /
• 2022

In this paper, a hybrid vibration-impedance-based damage monitoring approach is experimentally evaluated for prestressed concrete (PSC) structures with local strand breakage. Firstly, the hybrid monitoring scheme is designed to alert damage occurrence from changes in vibration characteristics and to localize strand breakage from changes in impedance signatures. Secondly, a full-scale PSC anchorage is experimented to measure global vibration responses and local impedance responses under a sequence of simulated strand-breakage events. Finally, the measured data are analyzed using the hybrid monitoring framework. The change of structural condition (i.e., damage extent) induced by the local strand breakage is estimated by changes in a few natural frequencies obtained from a few accelerometers in the structure. The damaged strand is locally identified by tomography analysis of impedance features measured via an array of PZT (lead-zirconate-titanate) sensors mounted on the anchorage. Experimental results demonstrate that the strand breakage in the PSC structure can be accurately assessed by using the combined vibration and impedance features.

• Ocean and Polar Research
• /
• v.28 no.2
• /
• pp.209-214
• /
• 2006

The East Sea Branch (ESB) of KORDI will be launched in 2008. She will take a role of monitoring the sea surface topography and temperature by satellites, short- and long-term sea levels by tide gauges, coastal currents and open-sea circulation by setting up coastal radars and mooring current-meters and acoustic equipments, as well as monitoring nearshore processes, coastal erosion and water pollution. A basic program of coastal zone management will help ocean-policy makers to set up right decisions based upon scientific background of the regional data in the East Sea. Networking among the neighboring countries around the sea will supply more useful information not only for experts but also for ordinary vacationers or fishermen. In order for this program to be successfully settled down during the next decade, it is necessary for a leader to have the right vision to attract more experts from global brain pools and to manage the ESB as a leading-edge observatory in the world. Details about this leading-edge operational program are introduced in the text.

• Smart Structures and Systems
• /
• v.15 no.4
• /
• pp.1159-1175
• /
• 2015

In this study, the effect of temperature variation on the wireless impedance monitoring is analyzed for the tendon-anchorage connection of the prestressed concrete girder. Firstly, three impedance features, which are peak frequency, root mean square deviation (RMSD) index, and correlation coefficient (CC) index, are selected to estimate the effects of temperature variation and prestress-loss on impedance signatures. Secondly, wireless impedance tests are performed on the tendon-anchorage connection for which a series of temperature variation and prestress-loss events are simulated. Thirdly, the effect of temperature variation on impedance signatures measured from the tendon-anchorage connection is estimated by the three impedance features. Finally, the effect of prestress-loss on impedance signatures is also estimated by the three impedance features. The relative effects of temperature variation and prestress-loss are comparatively examined.