• 한국수산과학회지
• /
• 제31권2호
• /
• pp.202-209
• /
• 1998

본 연구에서는 부유식 해상관측시설의 파랑중 운동응답 및 표류력 해석을 위해 Green 적분방정식에 기초한 3차원 수치해법을 개발하였다. 본 방법에서는 소오스분포와 더브렛분포를 함께 사용하였으며, 판요소로는 3각형 요소와 4각형 요소를 병행 사용하였다. 불규칙파수 현상을 제거하기 위해 개량된 적분방정식 해법을 적용하였으며, 시간평균 표류력의 계산은 원인별 성분파악이 가능한 물체표면 직접적분법을 사용하였다. 개발된 전산 프로그램의 검증을 위해 비교자료가 있는 구형 부유체에 대한 계산이 수행되었고, 이에 대한 계산을 통해 개발된 프로그램으로부터 신뢰성있는 결과를 얻을 수 있음을 확인하였다. 실제시설에 대한 적용예로서 직경 2.6m 흘수 3.77m인 원통형 해상관측용 부이에 대한 계산을 수행하여 그 운동특성 및 표류력 특성을 고찰하였다. 운동응답 해석결과는 공진주파수를 설치해역의 파랑 탁월주파수 범위밖에 놓이도록 부이의 형상과 치수를 조정하는데 활용할 수 있고, 또 이들 계산을 통해 댐퍼 등의 설치효과도 미리 예측할 수 있다. 또한, 계산된 표류력은 황천중에서 계류계에 걸리는 최대하중을 예측하는데 이용할 수 있으므로 계류계의 설계에 있어 중요한 기초자료로 활용된다. 본 수치해법은 원칙적으로 대상 부유체의 형상에 제약을 받지 않으므로 향후 다양한 형상의 부유식 해상관측 시설들의 설계 및 설치$\cdot$운용에 폭 넓게 적용할 수 있다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 춘계학술발표회
• /
• pp.47-52
• /
• 2006

연안 김 양식장의 효과적 관리를 위해서는 실제 시설량의 조사가 필요하며, 인공위성을 이용한 방법이 가장 효과적이다. 본 연구에서는 10m의 해상도를 갖고 있는 SPOT-5 다중분광영상을 사용하였으며, 김 양식장의 자동탐지알고리듬의 개발을 위하여 경기도 화성시 제부도 남방해역에 대한 2005년도 영상을 사용하였다. 김 양식장을 추출하기 위하여 우선 3밴드 영상의 분광특성을 이용한 밴드차(Band difference) 영상을 작성하여, 두 가지 방법 (형태학적 처리기법 및 Canny 에지 탐지기법)으로 처리를 한 후, 두 결과를 합성하여 라벨링함으로써 탐지율을 극대화하였다. 마지막으로 2005년 우리나라 연안의 김 양식장에 대한 인공위성 조사 결과, 실제 시설량은 676,749 책(柵)으로, 면허시설량 572,745 책보다 다소 많은 것으로 나타났다. 양식장 시설 현황 조사 결과는, 정부에서 전체 생산량을 조절할 수 있게 하며, 양식업자가 좋은 수확을 달성하는데 도움이 될 수 있을 것이다.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.466-475
• /
• 2010

This study intends to present a direction for the better reforming of fishers'onboard living conditions and proposals for preparing for ratification of the Work in Fishing Convention by means of making a comparison between standards on recent national fishing vessel accommodation facilities and standards on the Work in Fishing Convention and Its Recommendation, 2007, ILO. For the most part of standards on national fishing vessel accommodation facilities are somewhat insufficient to satisfy the provisions in Annex III of the Convention. Considering by items on fishing vessel accommodation facilities, the standards on insect protector, noise and vibration, heating and air conditioning, lighting, persons per sleeping room, recreational facility are not provided in national law. Headroom, separation of accommodation, sleeping room floor area, mattress size, mess room, galley and food storage are partially sufficient for the Convention. In case of sanitary facilities, national standards are not sufficient for the Convention. The other side, facilities related safety of ship and crew such as emergency escape etc., are fully sufficient for the Convention. These insufficiencies caused by different types of fishing vessel depend on originality of fishing method and practices. In the comparison between equivalent tonnage about vessel's length on convention and calculated tonnage of national existing fishing vessel, the difference are 226tons about length 24m and 501tons about length 45m. For that reason, headroom, persons per sleeping room, cabin of sicker and injured, sanitary facilities may decide to use gross tonnage in place of length (L) and the alleviating measure basis of convention. But in case of standards on sanitary facilities which are unsufficient for the Convention, specially in coastal fishing vessel length basis should be adopted with alleviating basis for less than length 24m.

• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.345-352
• /
• 2017

Recently, a new port reserves deep water depth for safe navigation and mooring, following the trend of larger ship building. Larger port facilities include long and huge breakwaters, and mainly adopt vertical type considering low construction cost. A vertical breakwater creates stem waves combining inclined incident waves and reflected waves, and this causes maneuvering difficulty to the passing vessels, and erosion of shoreline with additional damages to berthing facilities. Thus, in this study, the researchers have investigated the response of stem waves at the vertical breakwater near the entrance channel and applied numerical models, which are commonly used for the analysis of wave response at the harbor design. The basic equation composing models here adopted both the linear parabolic approximation adding the nonlinear dispersion relationship and nonlinear parabolic approximation adding a linear dispersion relationship. To analyze the applicability of both models, the research compared the numerical results with the existing hydraulic model results. The gap of serial breakwaters and aligned angles caused more complicated stem wave generation and secondary stem wave was found through the breakwater gap. Those analyzed results should be applied to ship handling simulation studies at the approaching channels, along with the mooring test.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.7-15
• /
• 2013

Eco-friendly and sustainable seaweed biomass energy have been under the spotlight as the future of renewable energy. However, seaweed culture is primarily conducted inshore, with the research on offshore culture still in an early stage. For massive biomass production, a systematic engineering approach is required to devise offshore seaweed culture facilities rather than the conventional empirical ones. To establish the fundamental behavior of seaweed culture facilities, the dynamic characteristics of a seaweed culture facility were analyzed in the study. For this purpose, numerical analyses of the seaweed culture facility (a frame type) were carried out by using the hydrodynamic simulation program ANSYS-AQWA. For the analysis, environmental loads were considered using the wave spectra and co-linear current; mooring variables were selected as parameters; and time domain analyses were carried out to acquire the time series responses and eventually the dynamic characteristics. Finally, the mooring performance was evaluated. It was found that the motion could be controlled by adjusting the buoyancy and mooring slope.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.843-851
• /
• 2022

This paper was conducted to study the conditions for the manufacture and operation of artificial snow removal and ice-making test facilities so that the test equipment can be tested in a low-temperature environment using the polar environment performance test facility. The polar environment performance test Facility is designed to artificially simulate extreme environments up to -65 ℃, and is a mid-to-large low-temperature environment test facility that can perform performance tests on offshore plant equipment, ships, leisure, and offshore structures. To verify the safety of deck work of ships operating in polar environments, artificial snow removal and artificial ice making devices were manufactured, and we conducted research on various operating environments using these facilities. For the efficient operation of artificial snow and ice making facilities, it is important to continuously supply dry air, and it has been found that installing an additional heater at the tip of the nozzle is effective in preventing freezing.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.92-99
• /
• 1996

Longline type aquaculture facilities are being used for scallpop culture in 30 m of water 2.5 km off the coast of Joomoonjin, Kangwon-do. In this paper, the facilities are modeled by the cabele-buoy-weight system, subject to the nonlinear behaviors of the mooring lines and the effects of current. Its static configuration is shown as a solution of 3-D nonlinear static equation and Runge-Kutta $4^{th}$ method is employed.

• Ocean Systems Engineering
• /
• 제9권1호
• /
• pp.43-77
• /
• 2019

A local-analytic-based Navier-Stokes solver has been employed in conjunction with a compound ocean structure motion analysis program for time-domain simulation of passing ship effects induced by multiple post-Panamax class ships in the exact condition of a real waterway. The exact seabed bathymetry was reproduced to the utmost precision attainable using the NOAA geophysical database for Virginia Beach, NOAA nautical charts for Hampton Roads and Norfolk harbor, and echo sounding data for the navigation channel and waterfront facilities. A parametric study consists of 112 simulation cases with various combinations of ship lanes, ship speeds, ship heading (inbound or outbound), channel depths, drift angles, and passing ship coupling (in head-on or overtaking encounters) were carried out for two waterfront facilities at NAVSTA Norfolk and Craney Island Fuel Terminal. The present paper provides detailed parametric study results at both locations to investigate the site-specific passing ship effects on the motion responses of ships moored at nearby piers.

• 해양환경안전학회지
• /
• 제28권spc호
• /
• pp.44-49
• /
• 2022

해양환경의 위험유해물질 배출규제는 주로 선박이나 해양시설 등으로부터의 오염규제에 한정되어 있기 때문에, 해안 인접 산업시설들의 위험유해물질 배출 허용기준 및 배출 지침 수립 등의 해양배출제도의 수립 필요성이 제기되고 있다. 본 연구에서는 해양산업시설의 위험유해물질 배출 허용기준 및 배출 지침 정보를 자세히 제공하고 있는 미국 환경보호청(US EPA)의 자료를 중심으로 허용기준 및 배출 지침 수립 등 배출 제도 체계를 소개하고 향후 국내 배출지침 적용에 대해 고찰했다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.268-273
• /
• 2004

A study on experimental method of the model test for the impulse turbine is carried out. the wave simulator is used to reproduce the real wave condition. It controls two parameter correspond to wave height and wave frequency. The optimum design which is reported by T. Setoguchi is manufactured and tested for the validation of our test facilities. The comparison of model test show that our facilities produce little bit higher efficiency at maximum efficiency point. To increase the efficiency of turbine, the new rotor with negative tip clearance is designed and being tested.