• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.2
• /
• pp.48-60
• /
• 2016

Accurate simulation of free-surface wave flows around a ship is very important for better hull-form design. In this paper, a computational fluid dynamics (CFD) code which is based on the open source libraries, OpenFOAM, was developed to predict the wave patterns around a ship. Additional anti-diffusion source term for minimizing a numerical diffusion, which was caused by convection differencing scheme, was considered in the volume-fraction transport equation. The influence of the anti-diffusion source term was tested by applying it to free-surface wave flow around the Wigley and KCS model ships. In results, the wave patterns and hull wave profiles of the Wigley and KCS model ships for various anti-diffusion coefficients showed quite close patterns. While, the band width of the water volume-fraction values between 0.1 to 0.9 at the Wigley and KCS model hull surfaces was narrowed by considering the anti-diffusion term. From the results, anti-diffusion source term decreased free-surface smearing.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.427-436
• /
• 1999

Simulation model for diffusion of oil spill is developed. The model can perform real time simulation in the case of oil spill accident in the ocean. The model consists of three dimensional ocean circulation model and model for diffusion of oil spill. Real time flow fields which are used in the calculation of advection of oil spill are obtained in the three dimensional ocean circulation model. The model for diffusion of oil spill includes the evaporation dissolution emulsification and downward diffusion. For the verification of the model it is applied to the oil spill from the accident of Sea Prince. The results shows good agreement.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.4
• /
• pp.261-271
• /
• 2018

In this study, a hydraulic model test, to which Particle Image Velocimetry (PIV) system applied, was used to determine the hydrodynamic characteristics of the advection-diffusion of saltwater according to bottom conditions (impermeable/permeability, diameter, and inclination) and the difference of the initial salt. Considering quantitative and qualitative results from the experiment, the characteristics of the density current were discussed. As an experimental result, the advection-diffusion mechanism of salinity was examined by the shape of saltwater wedge and the flow structure of density currents with various bottom conditions. The vertical salt concentration obtained from the experiment was used as quantitative data to calculate the diffusion coefficient that was used in the numerical model of the advection-diffusion of saltwater.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.16-22
• /
• 2002

The diffusion characteristics of an ocean dumping material in the south-eastern East/Japan Sea related to regulate the physical characteristics with the observation and the hydraulic experiment are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East/Japan Sea, the ocean dumping area had influenced the Tsushima Warm Current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913$\times$10$^{7}$ by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0~2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffusion must be regard the pynocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219$\times$10$^{-8}$ ~8.874$\times$10$^{-4}$ cm$^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.15-20
• /
• 2014

Accurate simulation of free-surface wave flows around a ship is very important for better hull-form design. In this paper, a computational fluid dynamics (CFD) code, termed SNUFOAM, which is based on the open source libraries, OpenFOAM, was developed to predict the wave patterns around a ship. Additional anti-diffusion source term for minimizing a numerical diffusion, which was caused by convection differencing scheme, was considered in the volume-fraction transport equation. The influence of the anti-diffusion source term was tested by applying it to free-surface wave flow around the Wigley model ship. In results, the band width of the volume fraction contours between 0.1 to 0.9 at the hull surface was narrowed by considering the anti-diffusion term.

• Ocean and Polar Research
• /
• v.26 no.1
• /
• pp.43-50
• /
• 2004

The diffusion model, which considers diffusion and sorption, is proposed. The FEM program developed on the basis of the diffusion model provides the estimation of chloride concentration according to cyclic humidity and sorption. After the humidity diffusion analysis is carried out, the chloride ion diffusion and sorption analysis are conducted on the basis of the preestimated humidity data in each element. Each element has different analysis variables at different ages and locations. At early ages, the difference between inner and outer relative humidity causes the chloride ion penetration by sorption. As the humidity diffusion reduces the difference with age, the effect of sorption on the chloride ion penetration decreases. By the way, the cyclic humidity increases the effect of sorption on the chloride ion penetration at early ages, and the quantity of chloride ion around steel at later ages. Therefore, the in situ analysis of chloride ion penetration for marine concrete structures must be performed considering the cyclic humidity condition and the long term sorption.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.64-68
• /
• 2009

It has been observed that coated steel structures deteriorate more rapidly than the designed lifetime due to acid rain caused by air pollution, etc. Therefore, improving the corrosion resistance of anti-corrosive paint is very important in terms of safety and the economic point of view. In this study, the corrosion resistance of five kinds of anti-corrosive paints, including the Acryl, Fluorine, and Epoxy resin series, were investigated with electrochemical methods, such as corrosion potential measurements, polarization curves, diffusion limiting current density, etc. As a result, the corrosion resistance of the F101 specimen with the fluorine resin series was found to be superior to the other specimens, while E100 with the epoxy resin series also showed a somewhat good corrosion resistance. Furthermore, it was observed that the amount of water and oxygen entering the inner side of a painted film increased with an increase in immersion time, irrespective of the kind of resin series. However, the oxygen diffusion limiting current density of a specimen with good corrosion resistance was relatively decreased compared to other specimens, because of the difficulty of oxygen diffusion penetrating to the inner side of the film. Consequently it is suggested that we can qualitatively evaluate the corrosion resistance of an anti-corrosive paint by measuring the diffusion limiting current density as an electrochemical method.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2003.08a
• /
• pp.208-215
• /
• 2003

Convective-diffusion equations appear in various disciplines such as hydrology, chemical engineering and oceanography dealing with the transport problem of scalar quantities. Since it is nonlinear, numerical methods are generally used to obtain its solution. Very limited number of analytical solutions are available usually in cases when the convective velocity is constant or has a simple functional form (for some collection of the solutions, see Noye, 1987). There is however a continuing need to develop analytical solutions because of its practical importance. Analytical solutions of the convection-diffusion equation are valuable not only for the better understanding on the transport process but the verification of numerical schemes. (omitted)

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.180-185
• /
• 2001

In order to regulate the physical characteristics of an ocean dumping material in the south-eastern East Sea, the diffusion characteristics with the observation, hydraulic experiment and numerical experiment data are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East Sea, the ocean dumping area had influenced the Tsushima warm current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913${\times}$10$^{7}$ $\textrm{cm}^2$/sec by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0∼2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffustion must be regard the pycnocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219${\times}$10$^{-8}$∼8,874${\times}$10$^{-4}$ $\textrm{cm}^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity. (4) From the result of diffusion simulation in the East Sea, the co-concentration line of 0.05 ppm and 0.1 ppm are limited at dumping area after 200 days. The constant concentration line of 0.01 ppm is distributed to the vicinity of Ulleungdo and Tokdo, but isn't distributed to the coastal area of East Sea and southern area of Jung in the East Sea.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.23-27
• /
• 2002

Ocean pollution like as oil spill and red tide have occurred considerable and executing clean-up them. Rapid prediction of polluting area is necessary that efficiency clean-up. In this study, develop the program that clean-up worker could easy predict polluted area. This paper is introduced configuration and contents of ODM(oil diffusion modelling) which constructed with GUI(Graphic User Interface) system. ODM is consisted with pre, post and main process, and constructed on window process. So, clean-up worker easy operating program and confirm the result. Studying this program, the distribution of ocean pollutant and phase of ocean movement is shown without difficulty on a computer.