• 한국해양공학회지
• /
• 제20권5호
• /
• pp.1-8
• /
• 2006

Offshore structures are subjected to wave, wind, and earthquake loads. The failure of offshore structures can cause sea pollution, as well as losses of property and lives. Therefore, safety of the structure is an important issue. The reduction of the dynamic response of offshore towers, subjected wind generated random ocean waves, is a critical problem with respect to serviceability, fatigue life and safety of the structure. In this paper, a structural control method is proposed to control the vibration of offshore structures by the probabilistic neural network (PNN). The state vectors of the structure and control forces are used for training patterns of the PNN, in which control forces are prepared by linear quadratic regulator (LQR) control algorithm. The proposed algorithm is applied to a fixed offshore structure under random ocean waves. Active control of the fixed offshore structure using the PNN control algorithm shows good results.

• 한국해안해양공학회지
• /
• 제11권4호
• /
• pp.173-188
• /
• 1999

김등(1999)은 등매개 케이블요소(isoparametric cable element)의 접선강성행렬과 질량행렬을 유도하고, 하중증분법을 이용하여 지점 변위를 일으키고 자중, 부력 및 조류력을 받는 해양케이블의 초기평형 상태를 결정하였다. 또한 초기의 정적평형상태를 기준으로 자유진동해석법을 제시하였다. 본 연구에서는 이전의 연구를 확장시켜서 파랑하중을 받는 해양 케이블의 비선형 동적 해석을 수행한다. 규칙파 및 불규칙파에 의한 파력을 받는 수중케이블에 대하여 비선형해석을 수행하고, 해석결과의 결과분석을 통하여 해양케이블의 동적특성을 파악한다.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.1-9
• /
• 2010

A series of experiments employing particle image velocimetry (PIV) technique was conducted to produce benchmark wave kinematics data for regular waves having four different wave slopes in 2-D wave tank. Water velocities and accelerations near the free surface of regular waves were computed from image pair obtained by PIV systems. With the measured wave velocity field, the wave accelerations were computed using a centered finite difference scheme. Both local and convective components of the total accelerations are obtained from experimental data. With increasing the wave slope, the horizontal velocity and the vertical accelerations near the wave crest obtained by PIV technique became larger than theoretical results, which are well-known phenomena of the wave nonlinearity. It is noted that the relative magnitude of convective acceleration to the local acceleration became larger with increasing wave slope.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.8-15
• /
• 2005

Wave energy has been considered to be one of the most promising energy resources for the future, as it is pollution-free and an abundant natural resource. However, since it has drawbacks of non-stationary energy density, it is necessary to change the wave energy into a simple concentrated energy. Progressive waves in a coastal area can be amplified, swashed, and overtopped by a wave overtopping control structure. By conserving the quantity of overflow in a reservoir, the kinetic energy of the waves can be converted to the potential energy with a hydraulic head above the mean sea level. The potential energy in the form of a hydraulic head can be utilized to produce electric power, similar to hydro-electric power generation. This study aims to find the most optimal shape of wave overtopping structure for maximum overtopping volume of sea water; for this purpose, we carried out the wave overtopping experiment in a wave tank, under both regular and irregular wave conditions.

• 한국해양공학회지
• /
• 제19권3호
• /
• pp.18-24
• /
• 2005

Wave overtopping is one of the most important processes for the design of seawalls. The term "wave overtopping" is used here to refer to the processes where waves hit a sloping structure run up the slope and, if the crest level of the slope is lower than the highest run up level, overtop the structure. Wave overtopping is dependent on the processes associated with breaking wave. A numerical model based on Navier-Stokes equation and the Marker-density function for predicting wave overtopping of coastal structures is developed in this paper. In order to evaluate the present model, two simulations are tested. One is overflow without waves at vertical seawall, and the other is wave overtopping at sloping seawalls.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.149-153
• /
• 2004

본 연구에서는 태풍의 천애역 내습시 태풍의 풍역이동과 위험반경내의 풍향 풍속 변화를 해안지형의 특성에 따라 파랑이 충분히 발달할 수 있는 해역을 대상으로 발생가능한 풍향별 취송거리 및 관측된 풍향 풍속으로 천해설계파를 산정하기 위한 한가지 수치해석기법을 소개한다. 이를 통해 구조물 전면에서의 파고계산을 위해서는 구역을 결정할 때 해역의 개방 정도 및 폐쇄성과 태풍중심 이동경로가 천해설계파 산정시 중요함을 강조 할 수 있다. 실시간 해석기법에 대해서 부가적인 재해석 절차가 필요한 상황이지만 본 연구의 해석기법은 연안 해안지역의 천해설계파를 추정함에 있어 태풍의 천해역 통과시 풍역의 변화특성과 이를 고려한 파랑의 불획 정성을 극복하고 보완 할 수 있는 천해설계파 산정을 위한 기초적 연구로서 활용될 수 있을 것이라 판단된다.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.49-58
• /
• 2013

Recently, the design of commercial ships with less green-house gas is one of great interests in naval architecture fields. Ship designers are asked to find optimum hull forms with minimum resistance in ocean waves. The accurate computation of added resistance, therefore, is getting more important for the prediction of power increase in random ocean waves. This study focuses on the numerical computation of added resistance on ships with Ax-bow shapes which are designed to reduce added resistance. To this end, the time-domain Rankine panel methods based on weakly-nonlinear and weak-scatterer approaches are applied, which can reflect the influence of above-still-water bow shape. As computational models, KCS and KVLCC2 hull forms are considered. Each ship is combined with the three types of Ax-bow shape, and computational results are compared each other.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권5호
• /
• pp.566-582
• /
• 2018

A moored barge alongside quay can be influenced by a nearby passing ship and its ship-generated waves. In this study, a time-domain numerical method based on a three-dimensional potential flow solver is developed to investigate the passing ship problem with a moored barge alongside quay. Potential flows around the passing ship and the moored barge alongside a quay is directly solved by using a classical finite element method. Total computational meshes including a passing ship, a moored barge and a quay is updated at each step with an efficient re-mesh algorithm. To validate the developed numerical method, a conventional ship wave problem and a passing ship problem on the open sea has been solved and the solutions are compared with the existing data. Then, a series of numerical computations were carried out to investigate the passing ship effect on a moored barge alongside quay. The characteristics of the passing ship effects are studied with varying the simulation parameters such as passing ship speed, separation distance, wall distances and waves. Focus is made on hydrodynamic forces due to the passing ship effect and its ship waves.

• 한국해안해양공학회지
• /
• 제13권3호
• /
• pp.254-261
• /
• 2001

장주기파가 깊은 바다에서 수심이 급격히 감소하는 대륙사면을 지나 대륙붕 위로 전파해 들어오는 경우 육지에서 반사된 파가 대륙사면에서 외해로 전파해 나가지 못하고 재반사되어 들어오기 때문에 육지 쪽에서 커다란 수위진동을 일으키는 것은 잘 알려진 사실이다. Liu(1986)는 반원형 외해 경계를 따라 수심의 불연속이 존재하는 지형을 가정하여 이러한 현상을 해석하였으나 그의 해석해에는 오류가 있었다. 본 논문에서는 직선해안 및 직사각형 항만에 대한 Liu(1986)의 해석해를 수정하고, 이를 정 등(1998)의 확장형 완경사방정식에 기초한 Galerkin 유한요소 모형에 의한 결과와 비교하여 확인하였다.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.9-14
• /
• 2009

The green water on deck has many harmful effects on the vessel in rough seas such as damages to hull structures, damages to cargos, increase of the downtime, decrease of the stability, and so on. Floating Production Storage and Offloading vessels (FPSOs) are operated in a specific location and are normally positioned to meet mostly head or bow waves in order to reduce the roll motions. But this makes FPSOs more vulnerable to green water around the bow region therefore the bow shape should be properly designed to mitigate the green water damage. In this paper, experimental results in regular head waves for three kinds of bow shapes are compared and some design considerations are proposed, with the building a database for computational fluid dynamics (CFD) validation in mind.