• 한국강구조학회 논문집
• /
• 제28권1호
• /
• pp.13-22
• /
• 2016

최근 들어 다양한 분야에서 환경오염에 대한 관심이 높아지고 있으며 환경부하를 산출하는 환경적합성평가방법인 전과정평가에 관한 연구는 현재 많이 진행되고 있다. 그러나 SOC 시설물은 다양한 자재, 공정과정을 거치기 때문에 환경에 많은 영향을 미칠 것으로 예상되나 아직까지는 환경오염에 대한 대책 및 연구가 부족한 것으로 판단된다. 본 연구에서는 2000년 이후 설계된 204개 강교에 대한 데이터를 구축하였으며, 그 중 100개 교량을 대상으로 기획단계에서의 전과정평가를 실시하여 환경부하량을 산출하였다. 또한 강교에 대한 표준 공종 분류체계를 정립하였고, 이를 바탕으로 교량의 기본 설계 자료와 투입자재에 LCI DB를 적용하여 소요자재별 환경부하량을 산정하고 이를 Eco-point 값으로 나타내었다. 본 연구에서 도출된 환경부하량은 향후 강교의 설계에서 전과정평가 과정에 대한 기초자료로서 활용될 수 있을 것으로 판단된다.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.387-394
• /
• 2015

Before salvaging a wrecked ship, the physics-based simulation is needed to predict lifting force before real operation by floating crane or barge. Procedures affecting lifting force for the salvage can be divided into three stages. At the first stage, the bottom breakout force for the wrecked ship to escape from seabed sediment should be calculated. At the second step, the current force acting on the wrecked ship while lifting from the seabed to near sea surface should be considered. Finally, buoyancy change near at the sea surface when the wrecked ship start to escape from the water should be considered. In the previous studies, only the breakout force at the first stage was calculated based on simple assumption of embedment depth and contact area of the wrecked ship. Therefore, we develop a program for salvage simulation including whole stages. It is composed of four modules such as the equations of motion, time integration, force calculation, and visualization. As a result, it is applied to simulate lifting the wrecked ship according to various environmental loads including seabed sediments.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.349-368
• /
• 2019

Triceratops is one of the new generations of offshore compliant platforms suitable for ultra-deepwater applications. Apart from environmental loads, the offshore structures are also susceptible to accidental loads. Due to the increase in the risk of collision between ships and offshore platforms, the accurate prediction of structural response under impact loads becomes necessary. This paper presents the numerical investigations of the impact response of the buoyant leg of triceratops usually designed as an orthogonally stiffened cylindrical shell with stringers and ring frames. The impact analysis of buoyant leg with a rectangularly shaped indenter is carried out using ANSYS explicit analysis solver under different impact load cases. The results show that the shell deformation increases with the increase in impact load, and the ring stiffeners hinder the shell damage from spreading in the longitudinal direction. The response of triceratops is then obtained through hydrodynamic response analysis carried out using ANSYS AQWA. From the results, it is observed that the impact load on single buoyant leg causes periodic vibration in the deck in the surge and pitch degrees of freedom. Since the impact response of the structure is highly affected by the geometric and material properties, numerical studies are also carried out by varying the strain rate, and the location of the indenter and the results are discussed.

• 한국해양공학회지
• /
• 제29권4호
• /
• pp.300-308
• /
• 2015

With the increases in oil and gas prices, and energy consumption, drillship construction has increased during the last decade. A drillship using a dynamic positioning (DP) system to maintain its position and heading angle during drilling operations. In addition, a drillship is equipped with a moonpool structure to allow its drilling systems to be operated in the midship section. A drillship for the North Sea is specially designed to endure harsh environmental loads. For safe operation in the North Sea, the drillship should have good motion response and robust hull strength. A break water should be considered on the bow and side deck to prevent the green water on deck phenomenon from incoming waves. In addition, the moonpool should be designed to reduce the speed loss and resonance motion. In this study, the hydrodynamic characteristics of a drillship for the North Sea were examined in relation to the motion, wave loads, green water, and moonpool resonance in the initial design stage.

• 한국지반환경공학회 논문집
• /
• 제23권12호
• /
• pp.25-31
• /
• 2022

해양지반에 설치된 구조물은 육상지반에 설치된 구조물과는 달리 해상에서의 파하중, 풍하중, 그리고 조류하중 등과 같은 장기 반복하중을 고려해야 된다. 이에 해양지반에 설치된 구조물을 설계하기 위해서는 장기 반복하중을 받는 지반의 거동을 분석하는 것이 중요하다. 본 논문에서는 반복단순전단시험을 수행하여 구속압에 따른 장기반복하중에 대한 지반거동을 분석하고, 구속압에 따른 파괴특성을 쉽게 확인할 수 있는 3차원 설계파괴곡선을 작성하였다. 분석결과, 동일한 반복전단응력비와 평균전단응력비 조건이어도 구속압에 따라 설계파괴곡선의 위치가 차이가 있었으며, 파괴에 도달하는 반복하중횟수가 구속압에 영향을 받는 것을 확인하였다. 작성한 구속압에 따른 3차원 설계파괴곡선은 구속압에 따른 설계파괴곡선의 경향성과 대략적인 값을 추정할 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.219-222
• /
• 2009

Green ocean is one of the main issues internationally. Most governments are leading the role in boosting the economy through creating new green market and establishing system of coping with increasing international environmental regulation. Green ocean, which is a solution for the environmental issue of global warming, is applied throughout the industry. Domestic transportation industry including railway is also developing technology for creating green ocean. Transportation must decrease energy consumption at running stages because it shows high environmental loads expecially on using stages during its life cycle. Therefore, There are some tries for developing technologies; new engine through alternative energies, hybrid and lightweight. Railway transportation can not be exception. it is intended for this paper to suggest the direction of manufacturing environmentally friendly railway vehicle through the global warming effect evaluation of several materials being applied to vehicle and comparison of the results.

• 한국해양공학회지
• /
• 제20권5호
• /
• pp.1-8
• /
• 2006

Offshore structures are subjected to wave, wind, and earthquake loads. The failure of offshore structures can cause sea pollution, as well as losses of property and lives. Therefore, safety of the structure is an important issue. The reduction of the dynamic response of offshore towers, subjected wind generated random ocean waves, is a critical problem with respect to serviceability, fatigue life and safety of the structure. In this paper, a structural control method is proposed to control the vibration of offshore structures by the probabilistic neural network (PNN). The state vectors of the structure and control forces are used for training patterns of the PNN, in which control forces are prepared by linear quadratic regulator (LQR) control algorithm. The proposed algorithm is applied to a fixed offshore structure under random ocean waves. Active control of the fixed offshore structure using the PNN control algorithm shows good results.

• Wind and Structures
• /
• 제11권2호
• /
• pp.97-120
• /
• 2008

Wind and wave loadings have a predominant role in the design of offshore structures in general, and articulated tower in particular for a successful service and survival during normal and extreme environmental conditions. Such towers are very sensitive to the dynamic effects of wind and wind generated waves. The exposed superstructure is subjected to aerodynamic loads while the submerged substructure is subjected to hydrodynamic loads. Articulated towers are designed such that their fundamental frequency is well below the wave frequency to avoid dynamic amplification. Dynamic interaction of these towers with environmental loads (wind, waves and currents) acts to impart a lesser overall shear and overturning moment due to compliance to such forces. This compliancy introduces geometric nonlinearity due to large displacements, which becomes an important consideration in the analysis of articulated towers. Prediction of the nonlinear behaviour of these towers in the harsh ocean environment is difficult. However, simplified realistic mathematical models are employed to gain an important insight into the problem and to explore the dynamic behaviour. In this paper, various modeling approaches and solution methods for articulated towers adopted by past researchers are reviewed. Besides, reliability of articulation system, the paper also discussed the design, installation and performance of articulated towers around the world oceans.

• 한국해안·해양공학회논문집
• /
• 제26권1호
• /
• pp.33-40
• /
• 2014

극한 해양 환경하중을 고려한 해상풍력터빈 지지구조물에 대한 신뢰성 해석을 수행하였다. 신뢰성 해석을 위한 한계상태함수는 mud-line에서 지지구조물의 동적응답으로 정의되며, 동적응답은 정적응답과 동적응답계수의 곱으로 정의된다. 동적응답계수는 설계조건에서의 동적 시간이력응답을 분석하여 구할 수 있다. 허브(Hub) 위치에 작용하는 추력은 GH_Bladed를 사용하여 계산하였으며, 정적하중으로 적용하였다. 동적응답계수는 대수정규분포, 지반물성 중 내부마찰각은 상한과 하한이 결정된 베타분포이며, 그 외 설계변수는 정규분포 확률변수로 취급되었다. mud-line 에서의 동적응답을 통해 정의된 한계상태함수에 따라 일계신뢰도법(First order reliability method, FORM)을 사용하여 해상풍력터빈 지지구조물의 신뢰도지수를 산정하였다.

• 해양환경안전학회지
• /
• 제11권1호
• /
• pp.71-76
• /
• 2005

본 연구에서는 천수만유역을 대상으로 오염부하량을 산출하고 연안을 관리하는데 Gli의 활용방안을 연구하였다 오염원 관리의 단위인 유역 범위는 하계망 분석을 통하여 하천의 길이, 차수, 유역면적 등을 고려한 후, 수치지도에서 DEM을 이용하여 정성적인 방법으로 선정하였다. 천수만 유역은 총 6개의 단위유역과 33개의 소유역으로 구분되었으며, 단위유역과 소유역별 오염부하량의 차이가 크게 나타났다. 각 유역에서 산출된 오염부하략은 오염원 관리 측면에서 유역구분의 효용성을 검토하는 자료로 활용되며, 수질측정 및 환경기초시설의 입지 선정에도 이용 가능하다.