Ocean Systems Engineering

  • 제9권4호
  • /
  • Pages.349-368
  • /
  • 2019
  • /
  • 2093-6702(pISSN)
  • /
  • 2093-677X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Response of triceratops to impact forces: numerical investigations

  • Chandrasekaran, Srinivasan (Department of Ocean Engineering, IIT Madras) ;
  • Nagavinothini, R. (Department of Ocean Engineering, IIT Madras)
  • 투고 : 2019.03.18
  • 심사 : 2019.09.19
  • 발행 : 2019.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

Triceratops is one of the new generations of offshore compliant platforms suitable for ultra-deepwater applications. Apart from environmental loads, the offshore structures are also susceptible to accidental loads. Due to the increase in the risk of collision between ships and offshore platforms, the accurate prediction of structural response under impact loads becomes necessary. This paper presents the numerical investigations of the impact response of the buoyant leg of triceratops usually designed as an orthogonally stiffened cylindrical shell with stringers and ring frames. The impact analysis of buoyant leg with a rectangularly shaped indenter is carried out using ANSYS explicit analysis solver under different impact load cases. The results show that the shell deformation increases with the increase in impact load, and the ring stiffeners hinder the shell damage from spreading in the longitudinal direction. The response of triceratops is then obtained through hydrodynamic response analysis carried out using ANSYS AQWA. From the results, it is observed that the impact load on single buoyant leg causes periodic vibration in the deck in the surge and pitch degrees of freedom. Since the impact response of the structure is highly affected by the geometric and material properties, numerical studies are also carried out by varying the strain rate, and the location of the indenter and the results are discussed.

키워드

참고문헌

  1. Amdahl, J. and Eberg, E. (1993), "Ship collision with offshore structures", Proceedings of the 2nd European Conference on Structural Dynamics (EURODYN'93), Trondheim, Norway, June.
  2. Cerik, B.C., Shin, H.K. and Cho, S.R. (2015), "On the resistance of steel ring-stiffened cylinders subjected to low-velocity mass impact", Int. J. Impact Eng., 84, 108-123. https://doi.org/10.1016/j.ijimpeng.2015.04.011
  3. Chandrasekaran, S. and Nagavinothini, R. (2018), "Dynamic analyses and preliminary design of offshore triceratops in ultra-deep waters", Innov. Infrastruct. Solutions, 3(1), 16. https://doi.org/10.1007/s41062-017-0124-1
  4. Chandrasekaran, S. and Nagavinothini, R. (2018), "Tether analyses of offshore triceratops under the wind, wave, and current", Mar. Syst. Ocean Technol., 13(1), 34-42. https://doi.org/10.1007/s40868-018-0043-9
  5. Cho, S.R., Choi, S.I. and Son, S.K. (2015), "Dynamic material properties of marine steels under impact loadings", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics, ASEM15. Incheon, Korea.
  6. Do, Q.T., Muttaqie, T., Shin, H.K. and Cho, S.R. (2018), "Dynamic lateral mass impact on steel stringer-stiffened cylinders", Int. J. Impact Eng., 116, 105-126. https://doi.org/10.1016/j.ijimpeng.2018.02.007
  7. Feng, Y., Li, H., Li, C., Ruan, J., Zhang, Q. and Xu, W. (2017), "Investigation on the Structure Strength and Stability of Ring-Stiffened Cylindrical Shell With Long Compartment and Large Stiffener", Proceedings of the ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering (pp. V03BT02A034-V03BT02A034). American Society of Mechanical Engineers.
  8. Jin, W.L., Song, J., Gong, S.F. and Lu, Y. (2005), "Evaluation of damage to offshore platform structures due to the collision of the large barge", Eng. Struct., 27(9), 1317-1326. https://doi.org/10.1016/j.engstruct.2005.02.010
  9. Karroum, C.G., Reid, S.R. and Li, S. (2007), "Indentation of ring-stiffened cylinders by wedge-shaped indenters-Part 1: An experimental and finite element investigation", Int. J. Mech. Sci., 49(1), 13-38. https://doi.org/10.1016/j.ijmecsci.2006.08.020
  10. Khedmati, M.R. and Nazari, M. (2012), "A numerical investigation into the strength and deformation characteristics of preloaded tubular members under lateral impact loads", Mar. Struct., 25(1), 33-57. https://doi.org/10.1016/j.marstruc.2011.07.003
  11. Kvitrud, A. (2011), "Collisions between platforms and ships in Norway in the period 2001-2010", Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering (637-641). American Society of Mechanical Engineers.
  12. Liapis, S., Bhat, S., Caracostis, C., Webb, C., Lohr, C. (2010), Global performance of the Perdido spar in waves, wind, and current-numerical predictions and comparison with experiments. OMAE2010-2116.
  13. Nagavinothini, R. and Chandrasekaran, S. (2019), "Dynamic response analyses of offshore triceratops in ultra-deep waters under the wind, wave, and current", Structures, 20, 279-289. DOI: 10.1016/j.struc.2019.04.009.
  14. Ronalds, B.F. and Dowling, P.J. (1988), "Collision resistance of orthogonally stiffened shell structures", J. Constr. Steel Res., 9(3), 179-194. https://doi.org/10.1016/0143-974X(88)90088-0
  15. Singh, N.K., Cadoni, E., Singha, M.K. and Gupta, N.K. (2011), "Dynamic tensile behavior of multiphase high yield strength steel", Mater. Design, 32(10), 5091-5098. https://doi.org/10.1016/j.matdes.2011.06.027
  16. Srinivasan, C. and Nagavinothini, R. (2017), "Analysis and Design of Offshore Triceratops under Ultra-Deep Waters", World Academy of Science, Engineering and Technology, International Journal of Structural and Construction Engineering, 4(11).
  17. Srinivasan, C. and Nagavinothini, R. (2019a), "The ice-induced response of offshore triceratops", Ocean Eng., 180, 71-96. DOI: 10.1016/j.oceaneng.2019.03.063.
  18. Srinivasan, C. and Nagavinothini, R. (2019b), "Tether analyses of offshore triceratops under ice loads due to continuous crushing", Intl. J. Innov. Infrastruct. Solutions, 4:25. DOI: 10.1007/s41062-019-0212-5.
  19. Standard, N.O.R.S.O.K. (2007), N-003. Actions and Action Effects, Rev. 1.
  20. Storheim, M. and Amdahl, J. (2014), "Design of offshore structures against accidental ship collisions", Mar. Struct., 37, 135-172. https://doi.org/10.1016/j.marstruc.2014.03.002
  21. Syngellakis, S. and Balaji, R. (1989), "Tension leg platform response to impact forces", Marine Struct., 2(2), 151-171. https://doi.org/10.1016/0951-8339(89)90010-5
  22. Veritas, D.N. (2010), Buckling strength of shells, recommended practice DNV-RP-C202. Det. Nor. Ver. Class. AS, Veritasveien, 1.
  23. White, C.N., Copple, R.W. and Capanoglu, C. (2005), "Triceratops: an effective platform for developing oil and gas fields in deep and ultra-deepwater", Proceedings of the 15th International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers.