• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.29-34
• /
• 2004

Numerical and experimental studies on pipeline laying for intake Deep Ocean Water are carried out. In the numerical study, an implicit finite difference algorithm is employed for three-dimensional pipe equations. Fluid non-linearity and bending stiffness are considered and solved by Newton-Raphson iteration. Seabed is modeled as elastic foundation with linear spring and damper. Top tension and general configuration of pipeline at a depth are predicted. It is found that control for tension to prevent being large curvature of pipeline is needed on th steep seabed and, it should be considered 23.5 ton of tension at a top of pipe on the process of pipeline laying at 400m of water depth The largest top tension of pipe on condition of the beam sea during pipe laying is shown from the experiment. The results of this study can be contributed to the design of pipeline laying for upwelling deep ocean water.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.468-473
• /
• 2016

This paper focuses on the estimation of local ice loads exerted from ship-ice interaction processes. The Korean IBRV ARAON was used to perform field ice trials during her 2015 Arctic voyage. During ARAON's general ice transit, a total of 72 channels of data from both strain gauges on the inner hull plates and those installed on the transverse frames of the ARAON's bow section structures were analyzed to calculate the local ice loads. The local ice loads estimated from the analysis of the shear strain data measured on the side frames were compared to those from the hull plate pressures.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.232-232
• /
• 2017

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권2호
• /
• pp.301-314
• /
• 2015

Aiming at accurately distinguishing modeless component and natural vibration mode terms from data series of nonlinear and non-stationary processes, such as Vortex-Induced Vibration (VIV), a new empirical mode decomposition method has been developed in this paper. The key innovation related to this technique concerns the method to decompose modeless component from non-stationary process, characterized by a predetermined 'maximum intrinsic time window' and cubic spline. The introduction of conceptual modeless component eliminates the requirement of using spurious harmonics to represent nonlinear and non-stationary signals and then makes subsequent modal identification more accurate and meaningful. It neither slacks the vibration power of natural modes nor aggrandizes spurious energy of modeless component. The scale of the maximum intrinsic time window has been well designed, avoiding energy aliasing in data processing. Finally, it has been applied to analyze data series of vortex-induced vibration processes. Taking advantage of this newly introduced empirical decomposition method and mode identification technique, the vibration analysis about vortex-induced vibration becomes more meaningful.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.232-239
• /
• 2013

This paper provides the structure of a Reynolds Averaged Navier-Stokes(RANS) based simulation method and its validation results for the ship motion problem. The motion information of the hull computed from the equations of motion is considered in the momentum equations as the relative fluid motions with respect to a non-inertial coordinates system. A finite volume method is used to solve the governing equations, while the free surface is captured by using a two-phase level-set method and the realizable k-${\varepsilon}$ model is used for turbulence closure. For the validation of the present numerical approach, the numerical results of the resistance and motion tests for DTMB 5415 at two ship speeds are compared against available experimental data.

• 한국해양공학회지
• /
• 제18권4호
• /
• pp.15-22
• /
• 2004

Static and dynamic analyses of a very flexible and light riser, for upwelling the deep ocean water, is performed. In this numerical study, an implicit finite difference algorithm is employed for three-dimensional riser equations. Fluid non-linearity and bending stiffness are considered and solved, using the Newton-Raphson iteration. Maintaining the depth of end point of a flexible and light riser is very important for upwelling deep ocean water in a floating type development system. Weight is attached at the end point of the riser in order to maintain its intake depth. It is designed under the strong surface current and the configuration of the rise is predicted. In the dynamic analysis, the tension variation at the top point of the riser is presented. T e results of this study can contribute to the design of the development system in floating type for upwelling deep ocean water.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 춘계학술대회
• /
• pp.197-198
• /
• 2018

종래의 연안역의 활용을 위한 개발사업 뿐만 아니라 최근에는 해양레저스포츠 및 해양에너지의 개발 등을 통해 해양활용에 관한 다변화된 수요가 증가하고 있다. 안전하고 경제적인 해양의 활용을 위해 파랑특성의 파악은 매우 중요하다. 관측파랑데이터를 활용하여 종래의 연구들에서 제안된 불규칙한 해상상태를 대표하기 위한 파랑변수들을 도출하고 이들의 관계를 검토함으로서 실제 해양파의 특성을 확인하고자 한다.

• Journal of information and communication convergence engineering
• /
• 제11권3호
• /
• pp.153-166
• /
• 2013

A hierarchical time division multiple access (HTDMA) medium access control (MAC) protocol is proposed for clustered mobile underwater acoustic networks. HTDMA consists of two TDMA scheduling protocols (i.e., TDMA1 and TDMA2) in order to accommodate mobile underwater nodes (UNs). TDMA1 is executed among surface stations (e.g., buoys) using terrestrial wireless communication in order to share mobility information obtained from UNs which move cluster to cluster. TDMA2 is executed among UNs, which send data to their surface station as a cluster head in one cluster. By sharing mobility information, a surface station can instantaneously determine the number of time slots in a TDMA2 frame up to as many as the number of UNs which is currently residing in its cluster. This can enhance delay and channel utilization performance by avoiding the occurrence of idle time slots. We analytically investigate the delay of HTDMA, and compare it with that of wellknown contention-free and contention-based MAC protocols, which are TDMA and Slotted-ALOHA, respectively. It is shown that HTDMA remarkably decreases delay, compared with TDMA and Slotted-ALOHA.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.304-315
• /
• 2020

The main features of offshore turret platforms are station-keeping and weathervaning functions. Due to the complexity of the yaw motion, abundant research is being done to verify the factors that affect the heading stability. Simulations are used for studies that are not possible with experiments, but the conditions must be verified using experimental results. This study presents methods to estimate turret-related parameters such as the rotational stiffness and rotational damping. A time series analysis was performed, and the results showed that the calculation using the obtained parameters agreed well with experimental results.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.529-535
• /
• 2016

This study focuses on the comparison of measured data from 6-DOF motion sensor and strain gauge installed in the IBRV ARAON during 2015 summer voyage in the Arctic. Procedures to calculate the global ice load from MotionPak II inertial measurement system and the local load from stain gauge system are discussed. The ship's speed and peak load are determined in the concept of an ice collision "event". It is found that the peak values in the global ice calculated form whole ship motion analysis fall in the range of 1.5~3 times of the local ice load based in strain gauge measurement.