• Plant Resources
• /
• 제7권2호
• /
• pp.141-146
• /
• 2004

Frequent occurrence of off-type plants in a given cultivar has been a serious problem in both breeder's and farmer's fields. An experiment was designed to examine the differences in rate of occurrence of off-type plants among Tongil-type cultivars (high yielding cultivars derived from indica/japonica hybridization) from which the possible cause of higher occurrence of off-type plant in a specific cultivar was deduced. Among five Tongil-type cultivars examined for morphological variant in the field, only one cultivar, Dasanbyeo, had off-type plants. When analyzed with SSR markers, off-type plants showed different band patterns from original cultivar, having several extra bands in addition to cultivar-specific band, suggesting that off-type plants were originated from Dasanbyeo, rather than originated from mixing or mishandling of seed materials with other cultivars. The possible cause of off-type occurrence seems to be natural pollination with other cuItivars adjacent to the original cultivar during seed multiplication. This was supported from the observation that self-crossed progeny of the off type plants showed a wide range of variation of agronomic traits which could not be observed when there was a smaller introduction of genes to the fixed germplasm as happened in the case of cultivar mutation. Another evidence supported this idea that Dasanbyeo showed much of difference in floral organ and behavior to other cultivar to be subjected to higher out-crossing than other cultivars examined.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.67-68
• /
• 2022

The area inside the apartment building where tiles are installed is applied as a finishing material for walls and floors, including exterior walls, balconies, hallways, bathrooms, and kitchens. As it is constructed in various spaces, differences in the type and period of occurrence of tile defects may appear, which is caused by heterogeneous characteristics between materials and external causes. Therefore, in this study, two-way ANOVA was used to figure out the relationship between the defect occurrence type and the period depending on the type of tile construction in the apartment building.

• 생태와환경
• /
• 제54권4호
• /
• pp.315-326
• /
• 2021

팔당호에서 청수현상 발생은 지점별로 다른 양상을 보였으며, 발생시기는 3~12월로 연중 발생하는 것으로 나타났고, 주로 3~6월에 발생하였다. 청수기 발생빈도는 팔당댐앞, 경안천수역, 남한강수역, 북한강수역 순으로 나타났다. 청수현상 발생시 주요 요인인 투명도, 동물플랑크톤 현존량, Chl-a와 환경요인 상관분석 결과 수리·수문요인인 강우량, 체류시간은 투명도 및 탁도와 유의한 상관관계를 나타내 강우로 인한 체류시간의 변화가 청수현상을 좌우할 수 있는 것으로 나타났다. 또한 투명도는 청수기를 야기하는 것으로 알려진 동물플랑크톤 중 지각류 현존량 및 점유율과 유의한 상관관계를 나타냈으며, 지각류 현존량 및 점유율은 수온과 유의한 상관관계를 나타내 봄철 수온의 상승에 따른 지각류의 발생이 청수현상 발생을 야기할 수 있는 것으로 나타났다. 이에 따라 수리조건이 정체형 호수와 다른 하천형의 호수에서는 청수현상이 결빙기 이후 봄철뿐만 아니라 동일한 수계 내에서도 지점별 특성에 따라 다르게 나타날 수 있으며, 수체가 안정화될 시에 동물플랑크톤(지각류)의 증가, 식물플랑크톤 현존량 감소, 투명도가 증가하는 청수현상이 조건이 충족될 시 계절에 불문하고 연중 발생할 수 있는 것으로 나타났다.

• 대기
• /
• 제16권1호
• /
• pp.1-17
• /
• 2006

The purpose of this study is to find out the change of statistical characteristics of typhoons affecting the Korean Peninsula. For this purpose, we analyzed the occurrence frequency of typhoon for 50 years (1954-2003) and change of air temperature and sea surface temperature near the Korean Peninsula in the same period. We classified typhoon tracks affecting the Korean Peninsula, and analyzed their trends and the amount of damage by typhoon. While the annual occurrence frequency of typhoon in the western North Pacific gradually decreased, its frequency affecting the Korean Peninsula increased. In addition, the occurrence location migrated northward. This coincides with the increase in air temperature and sea surface temperature around the Korean Peninsula. Typhoon tracks affecting the Korean Peninsula were classified into 7 types. Among them, the occurrence frequency of type 6 and 7 has increased. Although the occurrence frequency is low in type 2, the amount of damage by typhoon and occurrence frequency are increasing recently.

• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.62-73
• /
• 2005

The objects of this research are to establish the criteria of peel occurrence considering the shape of bond terminus and to compare the strength properties of adhesive joint of different three type such as butt joint, T-shape, and single lap Joints. The criteria of peel occurrence at the bond terminus was suggested. Peel loads of three type adhesive joint (butt Joint, T-shape specimen, single lap joint) were determined from tensile tests. Principal stress distributions of these joints were determined from finite element method analysis. Then, peel occurrence was estimated with stress singularity factor$(K_{prin})$ when the terminus shape was square, with average principal stress when the terminus shape was rounded. The conclusions are summarized as follows; (1) In the non-filleted model(e.g., butt joint, T-shape specimen), principal stress shows singularity at the bond terminus, intensity of stress(principal stress) singularity $(K_{prin})$ can use as the criteria of peel occurrence at the bond terminus. (2) In the filleted model(e.g., single lap joint), principal stress has not affected singularity at the bond terminus. Average principal stress$(K_{av})$ can use as the criteria of peel occurrence at the bond terminus.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.166-166
• /
• 2023

Compound hazards (CHs) are two or more extreme climate events combined which occur simultaneously in the same region at the same time. Compared to individual hazards, the combination of hazards that cause CHs can result in greater economic losses and deaths. While several extreme climate events have been recorded across Asia for the past decades, many studies have only focused on a single hazard. In this study, we assess the spatiotemporal pattern of dry compound hazards which includes drought, heatwave, fire and wind across Asia for the last 42 years (1980-2021) using the historical data from ERA5 Reanalysis dataset. We utilize a daily spatial data of each climate event to assess the occurrence of such compound hazards on a daily basis. Heatwave, fire and wind hazard occurrences are analyzed using daily percentile-based thresholds while a pre-defined threshold for SPI is applied for drought occurrence. Then, the occurrence of each type of compound hazard is taken from overlapping the map of daily occurrences of a single hazard. Lastly, a multivariate assessment are conducted to quantify the occurrence frequency, hotspots and trends of each type of compound hazard across Asia. By conducting a multivariate analysis of the occurrence of these compound hazards, we identify the relationships and interactions in dry compound hazards including droughts, heatwaves, fires, and winds, ultimately leading to better-informed decisions and strategies in the natural risk management.

• 한국시뮬레이션학회논문지
• /
• 제11권3호
• /
• pp.35-48
• /
• 2002

In the work presented here, we describe a method to extract TrueType features for supporting letter recognition. Even if variously existing document processing techniques have been challenged, almost few methods are capable of recognize a letter associated with its TrueType features supporting OCR free, which boost up fast processing time for image text retrieval. By reviewing the mechanism generating digital fonts and birth of TrueType, we realize that each TrueType is drawn by its contour of the glyph table. Hence, we are capable of deriving the segment with density for a letter with a specific TrueType, defined by the number of occurrence over a segment width. A certain number of occurrence appears frequently often due to the fixed segment width. We utilize letter recognition by comparing TrueType feature library of a letter with that from input word images. Experiments have been carried out to justify robustness of the proposed method showing acceptable results.

• 한국주거학회논문집
• /
• 제3권2호
• /
• pp.75-88
• /
• 1992

The purpose of this study is to analyze the relations between the conditions of the flaws and the types of damage according to the characteristics of housing, and then to provide with some basic data for the construction of houses of good quality. The effective analytic data for this research are 558 of all 700 questionnaires gathered through distribution collection and personal interviews conducted from June 22, 1992 Through to July 6, towards the first occupants in apartment houses, tenement houses, multidetached houses, multifamily houses and detached houses that last 10 years after construction, located in Seoul and Kyungki-Do. Our major findings are as under:1) Our data reveal that the ratio of flaw occurrence by general type breaks down into noise 53.7%, crack 39.3%, dew condensation 36.9%, windows and doors 36.6%, structure and frame 35.3%, built-in materials 33.3%, the inferiority of equipments/facilities 29.0%, ill drainage 22.0%, and the leakage of water 19.3% average number of flaw occurrence, multi detached house is the highest as 13.7, apartment house 10.5, tenement house 10.5, detached house 10.51 and multifamily house 8.7.3) As regards the degree of flaw occurrence, the flaw of noise is as serious in the degree of occurence as it is high in the ratio of occurrence. Particularly, the following contrastive phenomena are found: multidetached house is normal (2.0) in the degree of occurrence but it is high in the ratio of occurrence: while multifamily house is 2.9 in the degree of occurrence but it is low in the ratio of occurrence.4) In view of the relations between the types of flaws and those of damage, the flaw type which significantly influences on the injury of spirit and health is built-in materials; the flaw types that have considerable effect on the damage of house and home life are the inferiority of equipments/facilities, due condensation, and inferior windows and doors; and the flaw types that have a bad influence over the reliance on the constructors are the inferiority of equipments/facilities, due condensation and built-in materials.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.127-141
• /
• 2004

Various types of integrated steam generators, which integrate IHTS and a steam generator into a single unit of equipment for an LMR, were analyzed using an analytic solution with some simplification. The analysis showed that the undesirable reversed heat transfer, of which occurrence was previously observed only in an integrated single-region bundle type, can also occur in an integrated double-region bundle type. The mechanism of the reversed heat transfer occurrence in the double-region type is explained and it is shown the mechanism in the double-region type is completely different from that in the single-region type. Based on this finding, a method for preventing the aforementioned heat transfer is suggested. The performance of the four types of the integrated steam generators is assessed. For this assessment, a SG is actually designed for each type and the optimization in the geometric parameters and flow rate are optimized.

• 천문학회보
• /
• 제41권1호
• /
• pp.80.2-81
• /
• 2016

We investigate the dependence of solar proton events (SPEs) on solar and interplanetary type II bursts associated with solar flares and/or CME-driven shocks. For this we consider NOAA solar proton events from 1997 to 2012 and their associated flare, CME, and type II radio burst data with the following subgroups: metric, decameter-hectometric (DH), and meter-to-kilometric (m-to-km) type II bursts. The primary findings of this study are as follows. First, about half (52%) of the m-to-km type II bursts are associated with SPEs and its occurrence rate is higher than those of DH type II bursts (45%) and metric type II bursts (19%). Second, the SPE occurrence rate strongly depends on flare strength and source longitude, especially for X-class flare associated ones; it is the highest in the central region for metric (46%), DH (54%), and m-to-km (75%) subgroups. Third, the SPE occurrence rate is also dependent on CME linear speed and angular width. The highest rates are found in the m-to-km subgroup associated with CME speed 1500 kms-1: partial halo CME (67%) and halo CME (55%). Fourth, in the relationships between SPE peak fluxes and solar eruption parameters (CME linear speed, flare flux, and longitude), SPE peak flux is mostly dependent on SPE peak flux for all three type II bursts (metric, DH, m-to-km). It is noted that the dependence of SPE peak flux on flare peak flux decreases from metric to m-to-km type II burst.