• 한국산업보건학회지
• /
• 제24권3호
• /
• pp.256-262
• /
• 2014

Objectives: The purpose of this study was to identify the major volatile organic compounds generated during extrusion work with nylon 66 resin and evaluate causes of discomfort among extrusion workers. Methods: A thermal decomposition experiment using nylon 66 resin collected at a worksite was conducted in the laboratory. Based on hazards identified through the thermal decomposition experiment, the exposure levels of the workers were evaluated. Results: The major decomposition products were formaldehyde, acetaldehyde, aniline, cyclopentanone and diphenyl amine. These materials were identical to those sampled in the extrusion booth. The sources of the annoying smells, about which the workers had complained, were formaldehyde, aniline, diphenyl amine, and other hazards in the vapor and fine particles produced by the extrusion work. Formaldehyde, acetaldehyde, and aniline were detected from air samples among workers involved in extrusion work. However, the concentration levels were much lower than Korean occupational exposure limits. The average concentration levels of formaldehyde, acetaldehyde, and aniline were 0.0120 ppm, 0.0036 ppm and 0.0006 ppm, respectively. Conclusions: The extrusion process at around $300^{\circ}C$ thermally decomposes the nylon 66 resin, emitting formaldehyde, aniline, and other hazards, which might have made workers uncomfortable due to their smells. The workers exposure levels to volatile organic compounds were far lower than Korean occupational exposure limits. However, since formaldehyde is a human carcinogen and acetaldehyde and aniline are also confirmed animal carcinogens, it is recommended that exposure levels should be maintained at a minimum level.

• Safety and Health at Work
• /
• 제14권2호
• /
• pp.163-173
• /
• 2023

In many industrial sectors, workers are exposed to manufactured or unintentionally emitted airborne nanoparticles (NPs). To develop prevention and enhance knowledge surrounding exposure, it has become crucial to achieve a consensus on how to assess exposure to airborne NPs by inhalation in the workplace. Here, we review the literature presenting recommendations on assessing occupational exposure to NPs. The 23 distinct strategies retained were analyzed in terms of the following points: target NPs, objectives, steps, "measurement strategy" (instruments, physicochemical analysis, and data processing), "contextual information" presented, and "work activity" analysis. The robustness (consistency of information) and practical aspects (detailed methodology) of each strategy were estimated. The objectives and methodological steps varied, as did the measurement techniques. Strategies were essentially based on NPs measurement, but improvements could be made to better account for "contextual information" and "work activity". Based on this review, recommendations for an operational strategy were formulated, integrating the work activity with the measurement to provide a more complete assessment of situations leading to airborne NP exposure. These recommendations can be used with the objective of producing homogeneous exposure data for epidemiological purposes and to help improve prevention strategies.

• Safety and Health at Work
• /
• 제15권1호
• /
• pp.114-117
• /
• 2024

A lithium-ion battery is a rechargeable battery that uses the reversible reduction of lithium ions to store energy and is the predominant battery type in many industrial and consumer electronics. The lithium-ion batteries are essential to ensure they operate safely. We conducted an exposure assessment five days after a fire in a battery-testing facility. We assessed some of the potentially hazardous materials after a lithium-ion battery fire.We sampled total suspended particles, hydrogen fluoride, and lithium with real-time monitoring of particulate matter (PM) 1, 2.5, and 10 micrometers (㎛). The area sampling results indicated that primary potential hazardous materials such as dust, hydrogen fluoride, and lithium were below the recommended limits suggested by the Korean Ministry of Labor and the American Conference of Governmental Industrial Hygienists Threshold Limit Values. Based on our assessment, workers were allowed to return to work.

• Safety and Health at Work
• /
• 제2권3호
• /
• pp.273-281
• /
• 2011

Objectives: Studies examining healthcare workers' exposure to antineoplastic drugs have focused on the drug preparation or drug administration areas. However, such an approach has probably underestimated the overall exposure risk as the drugs need to be delivered to the facility, transported internally and then disposed. The objective of this study is to determine whether drug contamination occurs throughout a facility and, simultaneously, to identify those job categories that are potentially exposed. Methods: This was a multi-site study based in Vancouver, British Columbia. Interviews were conducted to determine the departments where the drugs travel. Subsequent site observations were performed to ascertain those surfaces which frequently came into contact with antineoplastic drugs and to determine the job categories which are likely to contact these surfaces. Wipe samples were collected to quantify surface contamination. Results: Surface contamination was found in all six stages of the hospital medication system. Job categories consistently found to be at risk of exposure were nurses, pharmacists, pharmacy technicians, and pharmacy receivers. Up to 11 job categories per site may be at risk of exposure at some point during the hospital medication system. Conclusion: We found drug contamination on select surfaces at every stage of the medication system, which indicates the existence of an exposure potential throughout the facility. Our results suggest that a broader range of workers are potentially exposed than has been previously examined. These results will allow us to develop a more inclusive exposure assessment encompassing all healthcare workers that are at risk throughout the hospital medication system.

• 한국산업보건학회지
• /
• 제27권3호
• /
• pp.170-179
• /
• 2017

Objectives: This study aims to investigate the occupational radiation exposures of emergency medical technicians(EMTs) in emergency medical centers in Korea. The results will provide a basis for developing prevention programs to minimize adverse health effects relating to radiation exposure among emergency medical technicians working in this area. Methods: Radiation exposure doses were measured for twenty-two EMTs working in six emergency medical centers. Thermo Luminescent Dosimeters(TLD) were placed on three representative body parts, including chest, neck, and a finger. Measurements were conducted over the entire working hours of the participants for foor weeks. Dosimeters were analyzed according to a standard method by a KFDA-designated lab. Detection rate, annual radiation exposure dose, and relative levels to dose limit were derived based on the measured doses from the dosimeters. SPSS/Win 18.0 software(IBM, US) was used for statistical analysis. Results: Detection rates were 45.5%, 36.4%, and 45.5% for the dosimeters sampled from chest, neck, and a finger, respectively. The average annual doses were $2.39{\pm}3.44mSv/year$(range 0.38-10.0 mSv/year) for the chest, $2.72{\pm}3.05mSv/year$(2.00-11.34) for the neck, and $20.98{\pm}17.57mSv/year$(1.25-53.50) for the hand dose. The average annual eye dose was estimated to $3.61{\pm}2.37mSv/year$(1.50-8.34). The exposure dose levels of EMTs were comparable to those of radiologists, who showed relatively higher radiation dose among health care workers, as reported in another study. Conclusions: EMTs working in emergency medical centers are considered to be at risk of radiation exposure. Although the radiation exposure dose of EMTs does not exceed the dose limit, it is not negligible comparing to other professionals in health care sectors.

• 한국산업보건학회지
• /
• 제31권3호
• /
• pp.255-265
• /
• 2021

Objectives: The purpose of this study is to analyze the exposure characteristics of inorganic acids. Methods: We analyzed exposure data (n = 363,146) for six inorganic acids (hydrogen fluoride, hydrogen bromide, hydrogen chloride, phosphoric acid, nitric acid, and sulfuric acid) collected between 2017 and 2019 in South Korea. Measurement characteristics and exposure levels (ELs) were analyzed by inorganic acid, industry category, enterprise size, and measurement year. Results: Measurement percentage dominated in time-weighted average (TWA, 91%) compared to short term exposure limit (STEL) and Ceiling. Most of the measurements (79.7%) were collected from the manufacturing category of industry. Medians of ELs were mostly low (≤3% of the threshold limit), with the exception of sulfuric acid (4.6% of TWA and 10.5% of STEL). The percentages of exceeding 1% of the occupational exposure limits (OELs) in TWA were relatively high for sulfuric acid (35.8%) and hydrogen chloride (16.5%) compared to the other acids (4.2%-6.6%). In addition, the percentages of exceeding 1% of OELs in STEL or Ceiling were higher for sulfuric acid (22.9%), hydrogen chloride (12.3%), and nitric acid (8.2%) compared to the other acids (1.2%-1.9%). The small-sized enterprises showed higher ELs in TWA; contrarily, the large-sized enterprises had higher ELs in STEL or Ceiling. Conclusions: The measurement characteristics and ELs identified in this study could be useful for establishing safety and health policies for inorganic acids.

• Safety and Health at Work
• /
• 제15권1호
• /
• pp.96-101
• /
• 2024

Background: Silicosis among workers who fabricate engineered stone products in micro or small-sized enterprises (MSEs) was reported from several countries. Workplace exposure data of these workers at high risk of exposure to respirable crystalline silica (RCS) dust are limited. Methods: We surveyed workers performing cutting, shaping and polishing tasks at 6 engineered stone fabricating MSEs in Sydney, Australia prior to regulatory intervention. Personal exposure to airborne RCS dust in 34 workers was measured, work practices were observed using a checklist and worker demography recorded. Results: Personal respirable dust measurements showed exposures above the Australian workplace exposure standard (WES) of 0.1 mg/m³ TWA-8 hours for RCS in 85% of workers who performed dry tasks and amongst 71% using water-fed tools. Dust exposure controls were inadequate with ineffective ventilation and inappropriate respiratory protection. All 34 workers sampled were identified as overseas-born migrants, mostly from three linguistic groups. Conclusions: Workplace exposure data from this survey showed that workers in engineered stone fabricating MSEs were exposed to RCS dust levels which may be associated with a high risk of developing silicosis. The survey findings were useful to inform a comprehensive regulatory intervention program involving diverse hazard communication tools and enforcing improved exposure controls. We conclude that modest occupational hygiene surveys in MSEs, with attention to workers' demographic factors can influence the effectiveness of intervention programs. Occupational health practitioners should address these potential determinants of hazardous exposures in their workplace surveys to prevent illness such as silicosis in vulnerable workers.

• 한국산업보건학회지
• /
• 제17권3호
• /
• pp.235-244
• /
• 2007

By comparing the proteins from the workers exposed to styrene with the ones from controls, it may be possible to identify proteins that play a role in the occurrence and progress of occupational disease and thus to study the molecular mechanisms of occupational disease. In order to find the biomarkers for assessing the styrene effects early, before clinical symptoms develop and to understand the mechanisms of adverse health effects, we surveyed 134 employees, among whom 52 workers(30 male and 22 female) were chronically exposed to styrene in 10 glass-reinforced plastic boat manufacturing factories in Korea and 82 controls had never been occupationally exposed to hazardous chemicals including styrene. The age and drinking habits and serum biochemistry such as total protein, BUN and serum creatinine in both groups were significantly different. Exposed workers were divided into three groups according to exposure levels of styrene(G1, below 1/2 TLV; G2, 1/2 TLV to TLV; G3, above TLV). The mean concentration of airborne styrene in G1 group was $10.93{\pm}11.33ppm$, and those of urinary mandelic acid(MA) and phenylglyoxylic acid(PGA) were $0.17{\pm}0.21$ and $0.13{\pm}0.11g/g$ creatinine, respectively. The mean concentration of airborne styrene in G2 and G3 groups were $47.54{\pm}22.43$ and $65.33{\pm}33.47ppm$, respectively, and levels of urinary metabolites such as MA and PGA increased considerably as expected with the increase in exposure level of styrene. The airborne styrene concentration were significantly correlated to the urinary concentration of MA(r=0.784, p=0.000) and PGA(r=0.626, p<0.001). In the 2D electrophoresis, the concentration of five proteins including complement C3 precursor, alpha-1-antitrypsin(AAT), vitamin D binding protein precursor(DBP), alpha-1-B-glycoprotein(A1BG) and inter alpha trypsin inhibitor(ITI) heavy chain-related protein were significantly altered in workers exposed to styrene compared with controls. While expression of complement C3 precursor and AAT increased by exposure to styrene, expression of DBP, A1BG and ITI heavy chain-related protein decreased. These results suggest that the exposure of styrene might affects levels of plasma proteinase, carriers of endogenous substances and immune system. In particular, increasing of AAT with the increase in exposure level of styrene can explain the tissue damage and inflammation by the imbalance of proteinase/antiproteinase and decrease of DBP, A1BG and ITI heavy chain-related protein in workers exposed to styrene is associated with dysfunction and/or declination in immune system and signal transduction

• 한국환경보건학회지
• /
• 제38권2호
• /
• pp.105-117
• /
• 2012

Objectives: This study aimed to assess the concentration of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) in blood and factors controlling their exposure among Koreans. Methods: Study subjects were selected to include 718 members of the general population residing in five metropolitan cities and the Gangwon Province area from August 2008 to January 2009. A questionnaire was administered to investigate lifestyle, socio-demographic characteristics, and other related factors. Blood samples were collected and extracted using solid-phase extraction and anion-exchange methods, and quantified by high-performance liquid chromatograph (HPLC, Agilent 1200 Series) coupled with a Triple Quad LC-MS/MS system (Agilent 6410). Results: Geometric mean concentrations of PFOA and PFOS in the blood were measured as 1.82 and 6.06 ng/ml, respectively. Mean PFOA and PFOS concentrations generally increased with age in both genders. Blood PFOA concentration was significantly different according to such variables as age, family income, residential district, and province. Blood PFOS concentration was significantly different by such variables as gender, age, lifestyle factors such as regular exercise, alcohol consumption, and smoking status. Also, family income, hazardous facilities, job classification, and province contributed significantly to differences in blood PFOS concentration levels. Conclusions: Blood PFOA and PFOS concentrations in Koreans were similar with those found in Japan, the USA, and Germany, but less than those in Australia. PFOA and PFOS exposure seems to be affected by a variety of factors in Korea. Therefore, investigation is required for each factor to assess the relative contribution of different variables.

• 한국산업보건학회지
• /
• 제1권2호
• /
• pp.154-163
• /
• 1991

Particulate matter exposure leva1 of welders and grinding workers was evaluated in Banwol and Changwon industry complexes. Full period single sample and full period consecutive samples were collected with personal air samplers attached to workers. Compliance difference with 8-hour time weighted average (TWA) was compared by Korean strategy and the classification system recommended by OHSA for employee exposure to particulates. And difference of compliance was compared according to precision of measurement and analysis (total precision). Compliance rate was depended on the total precision, therefore, quality control of measurement and analysis was important.