• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.817-827
• /
• 2022

The real-name safety management system is to indicate "safety" after inspection by construction personnel before workers use it for the purpose of preventing safety accidents caused by unsafe conditions in temporary facilities and temporary constructions installed at construction sites. Purpose: By implementing the real-name system for safety management at construction sites, the objective is to respond to the "Severe Accident Punishment Act" and to improve the level of safety management at the same time. Method: In this study, a hierarchical analysis model was produced through previous studies of actual conditions such as types of safety incidents and causality at construction sites. The AHP model was used to calculate integrated weights and rankings with a pairwise comparison questionnaire for experts. Conclusion: As a result of the analysis of the upper classes, construction machinery was evaluated the highest, and real-name management system was evaluated the lowest. As a result of the lower-level analysis, it was considered that opening doors for safety facility management, tower cranes for construction equipment, management under the "Occupational Safety and Health Act" under the real-name management system, and CEO duties for safety management organizations were the most important.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.1
• /
• pp.99-106
• /
• 2024

In the event of an emergency such as facility shutdown during process operation, the by-product gas must be urgently discharged to the vent stack to prevent leakage, fire, and explosion. At this time, the explosion drop value of the released by-product gas is calculated using ISO 10156 formula, which is 27.7 vol%. Therefore, it does not correspond to flammable gas because it is less than 13% of the explosion drop value, which is the standard for flammable gas defined by the Occupational Safety and Health Act, and since the explosion drop value is high, it can be seen that the risk of fire explosion is low even if it is discharged urgently with the vent stock. As a result of calculating the range of explosion hazard sites for hydrogen gas discharged to the Bent Stack according to KS C IEC 60079-10-1, 23 meters were calculated. Since hydrogen is lighter than air, electromechanical devices should not be installed within 23 meters of the upper portion of the Bent Stack, and if it is not possible, an explosion-proof electromechanical device suitable for type 1 of dangerous place should be installed. In addition, the height of the stack should be at least 5 meters so that the diffusion of by-product gas is facilitated in case of emergency discharge, and it should be installed so that there are no obstacles around it.

• Journal of the Korean Society of Safety
• /
• v.33 no.3
• /
• pp.39-45
• /
• 2018

The occupational safety and health act defines how to evaluate the explosion hazardous areas according to KS (Korean Industrial Standards). Current KS have to follow IEC (International Electrotechnical Commission) 60079-10-1 1st edition and there has been no change since 2008. And its 2nd edition has been revised in 2015. In this study, IEC 1st Ed. (IEC 60079-10-1 1st edition) is compared with IEC 2nd edition. Total 112 case studies including four materials (methane, propane, benzene, methanol) are selected to test and explosion hazardous ranges evaluated by IEC 1st and 2nd Ed. are analyzed according to various leakage pressures and hole sizes. In order to verify the results calculated by them, PHAST, which is one of the most representative consequence analysis programs, is employed. As a result, it can be concluded that there are many differences between IEC 1st and 2nd Ed. due to the discharge and the ventilation parameters. As comparing with PHAST, it is confirmed that IEC 1st provides more conservative values than PHAST. Even if IEC 2nd Ed. provides more conservative for gases, this fails to provide more conservative values for liquids. Therefore, it is worth to note that a large value between the explosion hazardous ranges value calculated by the IEC 1st Ed. and 2nd Ed. should be selected until further investigation and analysis is made. Morevover, the full consideration for IEC 2nd Ed. have to be needed.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.3 s.31
• /
• pp.275-284
• /
• 1990

To obtain the useful information for the status of working environment and health management of workers in manufacturing industries, comparision of results on the status of working environmental and health management of workers for 32 manufacturing industries in Chunan area from 1988 to 1989 was carried out. The results were as follows : 1. The rate of over-PEL (Permissible Exposure Limit) to for hazardous factors decreased significantly 23.5% in 1988, 18.3% in 1989 (p<0.05) and, the highest rate of over-PEL was the stone and sand handling industry, the highest rate of over-PEL was the dusty workplace as 38.5% in 1988, 35.2% in 1989. 2. The rate of workers exposed to hazardous factors in 1988 and in 1989 was 22.4% respectively, the rate of workers checked up special health examination was 40.1% in 1988, 75.3% in 1989. In stone and sand handling and medicochemical industries, none of workers exposed to hazardous factors was subjected to special health examination in 1988, but 75% of workers exposed to hazardous factors had checked up in 1989. 3. The 6 industries appointed as part-time factory physician among 17 industries which were supposed to have factory physician according to the Safety and Healthy Act of Korea, 6 out of 24 industries only appointed industrial hygienist, furthermore 4 out of 6 hygienists had another duty in addition to occupational hygiene itself.

• Journal of Society of Preventive Korean Medicine
• /
• v.27 no.3
• /
• pp.13-24
• /
• 2023

Objective : This study was aimed to reassess the scope of practice for medical personnel based on laws. Method : The law specifying the scope of practice for medical personnel has been selected searching Korean Law Information Center(https://www.law.gov.kr). The result was categorized as 'examination, diagnosis, treatment, procedure, prescription, and others'. Results : The laws related to medical procedures were divided into three categories: diagnosis, treatments, and public health and others. In the field of diagnosis, traditional Korean medicine practitioners are generally allowed to play a role. However, some laws specify that only medical doctors can be the primary authorities for diagnosing infectious diseases. In the area of treatments, particularly in emergency medical situations, only medical doctors or nurses are typically mentioned. There are debates in the field of public health and other areas concerning issues such as vaccination, disability diagnosis, and the qualifications for health center directors. A reevaluation is also needed for the Occupational Safety and Health Act, where only medical doctors are set as the personnel standard for workers' health examinations. Conclusion : To safeguard and promote the health of the citizens, there is a need for a clear definition of the licensure and scope of practice for healthcare professionals. Consistent interpretation of conflicting provisions among various laws and clear criteria for the term 'physician' in legal contexts are essential.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.442-451
• /
• 2019

Objectives: The aim of this study was to review the reduction methods for ammonia (NH₃) and hydrogen sulfide (H₂S) exposure in livestock. Methods: By reviewing domestic and international research reports from Korea and China, reducing ammonia and hydrogen sulfide in livestock pens was analyzed in terms of ventilation, deodorant, and feed additives. In addition, exposure limits in Korea and China were examined through a comparison between 'TLV-TWA and STEL under the Industrial Safety and Health Act in Korea' and 'Management Standards for Air of Livestock Pens in China'. Results and Discussion: In order to effectively control hazardous gases and odors in livestock pens, the enhancement of natural ventilation or the addition of ventilation fans at the pollution source are being examined. Deodorants are used as adsorbents or masking deodorants. Additives to feed were zeolite powder, FeSO₄·7H₂O, enzymes, and microbial preparations. Use of feed additives was low-cost and had significant effects compared to other methods. Zeolite was the most commonly used in feed additive in Chinese cases and proved to be low-cost and effective for reducing harmful gases. Enzyme preparations were shown to stimulate the growth of livestock, but were expensive. Conclusions: This study reviewed and examined domestic and international research papers in Korea and China for reducing ammonia and hydrogen sulfide concentrations in livestock pens. More diverse research and the development of feed additives are needed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.88-96
• /
• 1996

This study was conducted to establish model between lead and ZPP concentration in blood of workers exposed to lead. Workers employed in secondary smelting manufacturing industry showed $85.1{\mu}g/dl$ of blood lead level, exceeding $60{\mu}g/dl$, the Criteria for Removal defined by Occupational Safety and Health Act of Korea. Average blood lead level of workers in the battery manufacturing industry was $51.3{\mu}g/dl$, locating between $40{\mu}g/dl$ and $60{\mu}g/dl$, the Criteria for Requiring Medical Removal. Blood lead level of in the litharge and radiator manufacturing industry was below $40{\mu}g/dl$, the Criteria Requiring Temporary Medical Removal. Blood lead levels of workers by industry were Significantly different(p<0.05). 50(21 %) showed blood lead levels above $60{\mu}g/dl$, the Criteria for Removal and 66(27.7 %) showed blood lead levels between the Criteria for Requiring Medical Removal, $40-60{\mu}g/dl$. Thus, approximately 50 percent of workers indicated blood lead levels above $40{\mu}g/dl$, the Criteria Requiring Temporary Medical Removal and should receive medical examination and consultation including biological monitoring. Average ZPP level of workers employed in the secondary smelting industry was $186.2{\mu}g/dl$, exceeding above $150{\mu}g/dl$, the Criteria for Removal. Seventy seven of all workers(32.3 %) showed ZPP level above $100-150{\mu}g/dl$, the Criteria for Requiring Medical Removal. The most appropriate model for predicting ZPP in blood was log-linear regression model. Log linear regression models between lead and ZPP concentrations in blood was Log ZPP(${\mu}g/dl$) = -0.2340 + 1.2270 Log Pb-B(${\mu}g/dl$)(standard error of estimate: 0,089, ${\gamma}^2=0.4456$, n=238, P=0.0001), Blood-in-lead explained 44.56 % of the variance in log(ZPP in blood).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.90-98
• /
• 2021

Since 2017, the Occupational Safety and Health Act has been fully applied to school food services, and risk assessments have been implemented since 2019. The introduction was slow compared to other industries and was evaluated by non-professional nutritionists, so there was a limit to establishing the system. All schools under the Seoul Metropolitan Office of Education apply the KRAS every year in accordance with the OSH Act for school foodservice and a notice from the Ministry of Employment and Labor. A risk assessment is applied according to legal regulations. On the other hand, the effectiveness of risk assessment has been questioned because the frequency and intensity criteria of the risk are qualitative and subjective. Based on the accident statistics of catering workers, the frequency and intensity criteria of risk were presented quantitatively and objectively, and a risk assessment was conducted by applying a new calculation standard for some work during the catering service and compared with current risk assessment results. The risk was increased, and the improved effectiveness was confirmed by the specific suggestions for improvement. Thus, the pilot evaluation for the entire food service should be expanded, and the feasibility confirmed. The pilot evaluation should be applied to all schools to enhance the effectiveness and operability of the risk assessment.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.403-409
• /
• 2024

In this paper, the guidelines for the design of an Artificial Intelligence(AI) based Integrated Process Safety Management(PSM) system to enhance workplace safety using data from process safety reports submitted by hazardous and risky facility operators in accordance with the Occupational Safety and Health Act is proposed. The system composed of the proposed guidelines is to be implemented separately by individual facility operators and specialized process safety management agencies for single or multiple workplaces. It is structured with key components and stages, including data collection and preprocessing, expansion and segmentation, labeling, and the construction of training datasets. It enables the collection of process operation data and change approval data from various processes, allowing potential fault prediction and maintenance planning through the analysis of all data generated in workplace operations, thereby supporting decision-making during process operation. Moreover, it offers utility and effectiveness in time and cost savings, detection and prediction of various risk factors, including human errors, and continuous model improvement through the use of accurate and reliable training data and specialized datasets. Through this approach, it becomes possible to enhance workplace safety and prevent accidents.

• Journal of the Korean Society of Radiology
• /
• v.15 no.3
• /
• pp.355-359
• /
• 2021

In this study, the purpose of this study was to analyze the degree of exposure of radiation workers assigned to the Department of Radiology and frequent visitors during on-campus practice, and to conduct a basic study on the feasibility and optimization of the radiation protection of the Nuclear Safety Act for the Department of Radiology. . The average exposure dose of occupational workers by year was 0.01 mSv, the lowest in 2014 and 2016. The highest figure was 0.12 mSv in 2018. The average exposure dose of frequent visitors by year was the lowest at 0.013 mSv in 2018, and the highest at 0.022 mSv in 2016. According to this study, the annual exposure dose received by professors, practical assistants, and students in the department of radiology (department) who use only radiation generators in the course of in-school practice is less than 1 mSv, which is the dose limit for the general public. Therefore, at the time when the radiation dose of students in the Department of Radiology is lower than the dose limit of the general public, the current safety regulation of the Nuclear Safety law is judged to be excessive regulation. Therefore, it is considered necessary to revise the regulations for radiation generators in the current Nuclear Safety law or to revise the radiation safety management system for university students.