• 대한전자공학회논문지SP
• /
• 제42권4호
• /
• pp.13-20
• /
• 2005

본 논문에서 우리는 추정된 시차지도에서 가려짐 영역의 시차를 교정하는 새로운 스무딩 필터인 가려짐 패턴 (occluding patterns)을 제안한다. 영상은 몇 개의 계층으로 구성되어 있고, 각각의 계층은 유사한 시차를 나타낸다. 그리고 추정된 시차들은 가려짐 영역의 경계 주변에서 특정한 방향성을 갖고 분포하며, 이러한 시차 분포의 방향성은 좌우 시차지도에 대해서 서로반대이다. 그러나 평균값 필터 또는 중간값 필터와 같은 기존의 스무딩 필터는 이러한 시차의 분포 특성을 고려하지 않고 스무딩을 수행하기 때문에 오차는 줄일 수 있으나, 교정된 시차의 정확성은 보장되지 않았다. 이와 반대로, 본 논문에서 제안하는 가려짐 패턴은 좌우 영상에서 각각 추정된 시차지도에 대해서 가려짐 영역이 발생하는 특성과 가려짐 영역에서의 시차 분포 특성을 함께 고려하여 정확하게 가려짐 영역의 시차를 교정한다. 본 논문에서 제안한 가려짐 패턴은 다양한 실험 영상에 적용하여 실험하였고, 그 결과 기존의 스무딩 방법에 비해서 정확하게 시차를 교정하는 것을 확인하였다.

• 대한치과의사협회지
• /
• 제58권8호
• /
• pp.505-512
• /
• 2020

With the fourth industrial revolution, digitization is accelerating in all healthcare areas. In the field of dentistry, active discussions on digital dental technologies are ongoing, with increasing interest from clinicians daily. Thus far, accuracy and efficiency have primarily been emphasized in digital dentistry, and interest in occlusion has been relatively low. This is because digital dentistry has been predominantly used to restore small numbers of teeth rather than extensive prosthetic reconstruction. However, in the future, most dental treatments will undergo a digital transformation that will require the application of digital technology to more extensive prosthetic rehabilitation, for which discussion of occlusion is essential. In extensive prosthetic reconstruction, occlusion and articulation involve determining the position of the dental arch in relation to the reference plane of the skull or the long axis of the face and the position of the transverse horizontal axis. It also includes determining an occlusal surface with a shape that allows the mandible to move in an eccentric path and masticate most efficiently without any occlusal interference. To better understand how digitization will impact dentistry, this review article summarizes and discusses occlusion and articulation using digital dental technologies. This discussion is divided into several aspects, including facial scan, virtual articulation, augmented reality, and virtual reality.

• 대한치과교정학회지
• /
• 제10권1호
• /
• pp.45-53
• /
• 1980

This study was based on the study models of 32 subjects with normal occlusion, 40 with Class I malocclusion, 32 with Class II, Division 1 malocclusion and 38 with Class III malocclusion, aged 12 to 20 years (mean age 16.4 years). The purpose of present study was to define the difference between normal and malocclusion groups in maxillary dental arch and palate. On the basis of findings of this study, the following results were obtained. 1. The intermolar widths and the intercanine widths in Class II, Div. 1 malocclusion group were smaller than in normal occlusion group significantly. 2. The arch lengths measured in both Class I and Class II, Div.1 malocclusion groups were larger than in normal occlusion group. 3. The palates in Class I and Class II, Div. 1 malocclusion groups were longer and narrower than in normal occlusion, but the palates in Class III malocclusion group were shorter than in normal occlusion group significantly. 4. The palatal depths measured at level 1 in Class III malocclusion group were significantly higher than in normal occlusion and in Class II, Div. 1 group they were significantly higher than in normal occlusion at level 2 and 3. 5. The measurements of palatal areas at various levels showed no significant difference between malocclusion and normal occlusion groups. 6. The palatal indies 1 (palatal length / palatal width) measured in both Class I and Class II, Div. 1 malocclusion groups were significantly greater than in normal occlusion and the palatal indice 2 (palatal depth at level 1/palatal width) measured in all malocclusion groups are greater than in normal occlusion. 7. It was determined from findings of this study that the measurements of maxillary dental arch and palate were influenced to a considerable extent by the molar relationship.

• Korean Journal of Geomatics
• /
• 제1권1호
• /
• pp.7-13
• /
• 2001

Geospatial Information Systems (GIS) have been employed to systematically manage and design land use in urban areas. This has increased the need for more accurate vector and raster data. In Korea, l/l,000-scale digital maps are used as vector data for the facility management in urban areas. This has increased the need for large scale orthoimages. Orthoimages generated from aerial imagery can provide accurate information, making possible the more effective city management. However, there is a large problem in using the orthoimages, i.e., currently available conventional orthoimages have not been generated based on Digital Elevation Model (DEM) that takes into account the building heights. So this causes the displacements of building image in large scale orthoimages. The present study is an attempt to generate the large scale orthoimages based on building DEM. The semiautomatic building extraction method can detect building outlines by mouse clicking on either building roofs or corners. Building DEM, based on the outline and calculated building height, was used to produce the large scale orthoimages with the corrected building occlusion.

• 한국측량학회지
• /
• 제18권1호
• /
• pp.51-57
• /
• 2000

레이저 프로파일링 시스템의 등장으로, 기존에는 얻을 수 없었던 도시 지역에 대한 DTM이 취득 가능해졌고, 더욱 정확한 정사투영영상 또한 제작할 수 있게 되었다. 하지만, 높이변화를 보이는 자연지물과 인공구조물이 있는 지역에 대해 기존의 정사투영사진 제작기법이 적용될 때, 폐색이나 이중매핑과 같은 문제가 발생하여 정사투영영상의 품질을 저해하는 주요한 원인이 된다. 따라서, 본 연구에서는 카메라의 외부표정요소와 DTM을 이용하여 폐색영역을 탐지하고, 폐색이 안된 다른 영상의 정보를 통해 폐색영역을 복원하여 더욱 완전한 정사투영영상을 제작할 수 있는 알고리즘을 제안하였다. 제안된 알고리즘에 의해 자연지물이나 인공구조물에 의한 폐색영역을 탐지할 수 있었고 폐색영역의 많은 부분을 부가영상을 이용하여 복원하였다. 건물에 대한 사전지식을 이용하여 폐색영역을 탐지하는 국내 연구가 있지만, 본 연구는 건물에 대한 부가정보나 모델링을 사용하지 않고 DTM과 카메라 외부표정요소만을 이용하여 폐색영역을 탐지한다는 점에서 이러한 연구들과 차별성을 가진다.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.565-579
• /
• 1993

This study was accomplished to analyse and compare the occlusal contact patterns during eccentric mandibular movements in adult with normal occlusion. 50 subjects(male 27, female 23), who had natural occlusion and no symptom of temporomandibular disorder, were selected. Teeth contact patterns during mandibular eccentric movements were recorded and the distribution of tooth contacts in maximum intercuspation analysed by T-scan system. And then, tooth contact numbers recored by T-scan and silicone bite registration at centric occlusion were analysed and compared. The results obtained were as follows : 1. Antero-posteriorly, the qualitative center of occlusal contacts in centric occlusion were in the first molar areas, but there was a slight deviation in left-right directions. Thus, distribution of occlusal contacts were not bilaterally symmetric. 2. During the mandibular movements from centric occlusal position to right lateral and left lateral directions, the frequency that maxillary canine joined in lateral guidance was relatively high, but pure canine protected occlusion or pure group function occlusion had small frequency. 3. During mandibular protrusive movement, one or more maxillary central incisors frequently joined in protrusive guidance. 4. During mandibular eccentric movements, working and balancing side premature contact was observered in relatively high frequency. 5. In centric occlusal position, the numbers of occlusal contacts recorded on T-scan were relatively smaller than on silicone bite registration.

• ETRI Journal
• /
• 제34권1호
• /
• pp.87-97
• /
• 2012

This study presents an automatic matching method for generating a dense, accurate, and discontinuity-preserved digital surface model (DSM) using multiple images acquired by an aerial digital frame camera. The proposed method consists of two main procedures: area-based multi-image matching (AMIM) and stereo-pair epipolar line matching (SELM). AMIM evaluates the sum of the normalized cross correlation of corresponding image points from multiple images to determine the optimal height of an object point. A novel method is introduced for determining the search height range and incremental height, which are necessary for the vertical line locus used in the AMIM. This procedure also includes the means to select the best reference and target images for each strip so that multi-image matching can resolve the common problem over occlusion areas. The SELM extracts densely positioned distinct points along epipolar lines from the multiple images and generates a discontinuity-preserved DSM using geometric and radiometric constraints. The matched points derived by the AMIM are used as anchor points between overlapped images to find conjugate distinct points using epipolar geometry. The performance of the proposed method was evaluated for several different test areas, including urban areas.

• 대한치과교정학회지
• /
• 제17권1호
• /
• pp.33-45
• /
• 1987

This study was designed to examine relations between posture and size of the tongue and dentoalveolar pattern. The sample was consisted of three groups, the 34 subjects of Normal occlusion, the 31 subjects of Bimaxillary protrusion and the 31 subjects of Class III malocclusion. On the cephalograms, lengths, heights and areas of the tongue and intermaxillary space and on the study model, arch length, intercanine width, intermolar width and palatal height were measured. These data from measuring cephalograms and models were statistically analyzed. The results of the study were as follows; 1. Length of the tongue was the greatest in Bimaxillary protrusion and in order of Normal occlusion and Class III malocclusion. 2. Posture of the tongue was the lowest in Class III malocclusion and in order of Bimaxillary protrusion and Normal occlusion. 3. There were a tendency to be larger area of tongue and intermaxillary space in Class III malocclusion compared to Normal occlusion and Bimaxillary protrusion. 4. Size of the tongue and intermaxillary space showed low correlations with the dentoalveolar pattern.

• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.21-30
• /
• 2007

Despite of the successful clinical performance of implants, it is still lacking of the knowledge of changes in implant occlusion. The purpose of this study was to evaluate the changes of infraocclusal contact after clinical occlusal function of implant. Twenty patients(38 implants) were recalled during 10 months after placement of implant prosthesis. Occlusion changes were investigated at placement, placement 1 months, 4 months and 10 months serially with silicone bite material and T-Scan II sensor. Bony changes were also evaluated with periapical radiographs. The changes of silicone thickness and T-Scan II sensored areas were statistically analyzed with repeated measured ANOVA and the Scheffe's post-hoc test at the 95% significance level. The following results have been made based on this study: 1. Alveolar bone loss was within 0.20mm and it was generally concluded within physiologic level. 2. There were no statistically significant differences in the thickness changes of silicone material at 1 month and 4 months of occlusal function. However, there was statistically significant difference at 10 months of occlusal function (p<0.05). 3. There was no statistically significant difference in changes of occlusal contact area in T-Scan II at 1 month and 4 months of occlusal function, but there was statistically significant difference at 10 months of occlusal function (p<0.05). Conclusively, as time goes by, implant occlusion to be formed infraocclusion was to be far close and increased occlusal contact. However, it was not observed destructive bone resorption in periapical radiographs and any other side effects.

• Spatial Information Research
• /
• 제19권1호
• /
• pp.51-59
• /
• 2011

라인빙식의 항공디지털 카메라인 ADS 80의 후방(backward)영상으로 정사영성을 제작하고 건물의 기복 변위와 폐색영역을 보정 후, True Ortho Photo을 제작하였다. 또한 제작된 정사영상과 True Ortho-Photo을 검증을 위해 지상검사점, 사진기준점을 이용하여 평면 위치정확도 평가 및 분석한 결과, 프레임방식과 비교하여 상대적으로 소량의 지상기준점을 이용하여 고품질의 정사영상을 제작할 수 있었다. 또한 라인 방식 카메라의 True Ortho Photo 제작 시, 종중복도가 100%이므로 폐색영역 보정시에 효과적임을 검증 할 수 있었다.