• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.59-68
• /
• 2013

The objective of this study was to analyze occlusal contact pattern of 33 young adult males with normal occlusion during lateral excursion using T-scan III system which can measure the dynamic occlusion. Occlusal contact patterns were examined and categorized in non-working side disclusion point(more functionally acceptable position) not canine-to-canine position. Disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point during lateral excursion movement was also measured and compared among the groups divided according to contact patterns. The results showed that group function was clearly more dominant than canine guidance and other occlusal contact patterns different with existing patterns were found. There were significantly difference between groups in variables of T-scan measurement. T-scan III system is effective tools to analyze and evaluate occlusal contact patterns, disclusion time, occlusal force, and occlusal force distribution ratio of upper canine at disclusion point.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.5
• /
• pp.537-542
• /
• 2008

BSSRO is most frequently operated among orthognathic surgery techniques for repairment of maxillofacial deformities. In case of patients with maxillofacial asymmetry accompanying mandibular protrusion who are operated by BSSRO, this study considers the recovering time for masticatory force of each tooth and Masseteric EMG and the adequate time enabling normal occlusion. The patients who are operated with BSSRO under general anesthesia in Dankook Dental Hospital, Department of OMS are selected for this study. The control group is devided into 2. 26 patients with facial asymmetry accompanying mandibular protrusion are selected for group 1 and their maximum voluntary bite force and masseteric EMG are measured. Group 2 is formed by volunteers with healthy dentition who are measured maximum bite force and masseteric EMG on both sides of the mouth. At the week of 3rd, 5th, 7th, 9th and 11th, Mann-Whitney U test is carried on for statistical analysis and the result is as follows. 1. Patients with mandibular protrusion showed apparently low maximum bite force and masseteric EMG than patients with normal occlusion. 2. In comparison with control group 1, Occlusal force is regained in incisors and canines at the 9th week and in premolars and molars, 11th week and masseteric EMG is regained at 11th week. 3. Comparing to normal occlusal patients, no recovery could be found in experimental group in every parts of the mouth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.45-56
• /
• 2022

The purpose of this study is to evaluate changes of occlusion following the placement of preformed metal crown in the permanent first molar affected by severe caries or hypomineralization. The study was conducted on 24 patients who met the criteria among the patients with occlusion in the permanent first molar reaching the occlusal plane. Restorative treatment was performed on one first molar using preformed metal crown. Before treatment, immediately after treatment, after 4 weeks, and after 8 weeks, the T-scan III was used for measuring distribution of bite force at the maximum intercuspal position, and overbite was measured with digital vernier calipers and change of dental midline was surveyed. After 8 weeks, questionnaires survey was conducted. In most cases, immediately after treatment, the distribution of bite force between the restored side and non-restored side of arch was reversed compared to before treatment, and the overbite was decreased. However, after 4 weeks, bite force of the left and right side was balanced and the distribution of bite force on the restored and non-restored permanent first molars had similar values. Also, the changed overbite and midline were returned to pre-treatment status and there was no significant temporomandibular joint and masticatory discomfort after treatment. In this study, it was confirmed that spontaneous occlusal equilibrium was achieved one month after the placement of preformed metal crown.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.4
• /
• pp.423-436
• /
• 2011

Trauma from occlusion (TFO) is a pathologic alterations which develop in the periodontium as a result of undue masticatory force. The purpose of this article is to review the controversies about TFO. There are evidences that TFO is a risk factor in the progression of periodontitis. Tooth mobility should be reduced by selective occlusal adjustment. TFO can be developed dependent on the masticatory pattern, occlusion and anterior overbite in sound periodontal conditions. Secondary TFO may aggravate unstable occlusion. If "loss of posterior support" was occur, the problems were worsen. Extrusion, migration, rotation and pathologic deviation can be resulted. Opposite contention is the "shortened dental arch" concept. However, these two concepts persue the occlusal stability together. To treat TFO adequately, exact diagnosis and multi-disciplinary treatment should be needed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.207-215
• /
• 2017

Many factors should be considered for successful denture treatment at edentulous patients: support, retention, stability, occlusion, esthetics, etc. The patient who has severely absorbed residual ridges, however, treatments are challenging to satisfy those factors. The dentures that use anatomic artificial teeth show good mastication efficiency and esthetics but, can easily lose stability at absorbed ridges. On the contrary, the dentures that use non-anatomic artificial teeth perform better stability but, lower masticatory efficiency and esthetics at absorbed ridges. The lingualized occlusion, using both anatomic and non-anatomic teeth, introduced for compromise those of the pros and cons. At lingualized occlusion, buccal cusps of the teeth do not contact on centric relation. Therefore, direction of the occlusal force towards lingually, then stability of dentures increases. This case report shows the results of the treatment flat residual ridges using complete dentures with ligualized occlusion to increase dentures stability and satisfactory of the patient.

• The Journal of Korean Academy of Prosthodontics
• /
• v.9 no.1
• /
• pp.29-34
• /
• 1969

Occlusal force is a critical factor affecting the condition and structure of the periodontium. When the occlusal forces exceed the physiologic adaptive capacity of the tissues, tissue damage ensues. Such damage is referred to as trauma from occlusion. Excessive pressure causes compression, degeneration and realignment of the periodontal ligament fibers so that they are paralleled perpendicular to the tooth and bone. By inducing excessive occlusal forces with a high amalgam filling on rat's molar, the author observed histologic alterations of the periodontal ligament fibers by means of Hematoxylin-eosin, Van Gieson and Aldenyde fuchsin stainings. The results of the study were observed as follows: 1) The excessive occlusal forces altered arrangement of the collagenous fibers. 2) The arrangement of the oblique fibers showed appreciable differences between the control group and the group subjected to 10 days experimental trauma from occlusion. 3) The realignment of the transseptal fibers was not found. 4) The arrangement of the oblique fibers after 15 days of trauma from occusion was similar to that of 10 days experimental group. 5) The oxytalan fibers were more abundant at the cementum rather than at the alveolar bone. 6) The excessive occlusal forces produced funnel-shaped widening of the oxytalan fibers, which followed wavy course. 7) The oxytalan fibers appeared to be distributed mainly around the middle third of the root rather than that of the apical third of the root during the experimental trauma from occlusion.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.159-169
• /
• 1995

The purpose of this study was investigating the effects of pivot splint on width of the temporomandibular joint space in order to get the basic data for clinical applications. Pivot splint could be used for treating the patients with temporomandibular disorders, especially for chronic closed lock which would not be reduced by joint manipulation or with other methods. So it is necessary to have a lot of underlying data for using pivot splint, but there is few available reports related to mechanical principle or clinical results of the splint. Healthy twenty dental students wee collected for this study and pivot splint with 2.5mm high right-side pivot was used. Next, transcanial projection was taken and width of joint space at there mandibular positions were measured : habitual occlusion position, clenching position with splint, and clenching position with splint and mandibular force. The data were processed with SAS statistical program. The obtained results were as follows : 1. Ipsilateral posterior joint space width was increased on clenching the pivot splint, but joint space widths of contralateral side were not significantly changed. 2. Superior and posterior joint space width were increased on clenching the pivot splint with mandibualr force on both ipsilateral and contralateral side. 3. Ipsilateral joint space widths were not significantly changed from habitual occlusion position to clenching the pivot splint with active mandibular force, but in case of with passive mandibular force, posterior joint space width was significantly increased. 4. Correlationships between mandibular positions were more significant at anterior joint space than at superior or posterior joint space. But the correlation between clenching and clenching with mandibular force was significant at all the three joint space.

• Journal of Sensor Science and Technology
• /
• v.15 no.6
• /
• pp.449-456
• /
• 2006

The purpose of urodynamic investigation is to obtain the information on the function of the urinary system. The aim of this study is to acquire the useful information of lower urinary tract symptom (LUTS) diagnosis through void force signal as noninvasive method. The system which could evaluate the function of compensatory hypertrophy with noninvasive and comfortable method was implemented to measure uroflow and void force during urination. The implemented system composes of the sensor parts, signal conditioning parts and PC monitoring program. For the evaluation of the implemented system, the simulation of control part of the system was performed and the model system for the lower urinary system was designed. The superiority of a measuring characteristic of the implemented system was verified using the model system. From the evaluation of the model system, we have found out that the void force was dependent on the occlusion degree and compensatory hypertrophy significantly.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.7-15
• /
• 2003

This study used FEM(Finite Element method) based on micro-CT images to see the effects of occlusal force distribution with varying bone density and structure. the mandibular premolar region from human cadaver, thickness of 10mm was imaged using micro-CT. the cross sectional images were taken every $10{\mu}m$. these were reconstructed and the longitudinal image at the mid point of mesiodistal of the speciman was obtained for the specimen for the FEM. The stress disribution produced by a vertical force at 100N and 100N horizontal were analyzed by MSC Nastran FEM Package. according to the result of this study the occlusal force distribution depends on the structure of cancellus bone and for further information on the occlusal force distribution on the tooth and the surrounding structure requires further studies on cancellus bone structure. CEJ of all model show the highest peak and region whice meet teeth and bone show second high peak. Original model and cortical bone add model show different stress distribution. Stress distribution changed according to bone structures and densities.

• The korean journal of orthodontics
• /
• v.48 no.5
• /
• pp.339-345
• /
• 2018

Objective: The purpose of this study was to clarify the effects of continuous force application for extrusive tipping movement and occlusal interference on periapical root resorption in the rat mandibular first molar. Methods: We constructed an appliance comprising a titanium screw implant with a cobalt-chromium post as the anchorage unit and a nickel-titanium closed coil spring (50 cN) as the active unit. Force was applied on the mandibular left first molar of rats for 8 (n = 10) and 15 days (n = 10; experimental groups), with the tooth in occlusion. Five rats were included as a non-treated control group to examine the body effect of the appliance. Active root resorption lacunae, identified using tartrate-resistant acid phosphatase, were evaluated in terms of the length, depth, and area. Results: The rat mandibular first molars were mesially tipped and extruded in the occlusal direction. This mesio-occlusal tipping movement and occlusion resulted in the formation of a compression zone and active root resorption lacunae in the distoapical third of the distal roots. However, there was no significant difference in the amount of root resorption between the two experimental groups. The control group did not exhibit any active root resorption lacunae. Conclusions: Periapical root resorption was induced by continuous extrusive tipping force and occlusal interference in rat mandibular molars. These data suggest that we orthodontists had better take care not to induce occlusal interference during our orthodontic treatment.