• Restorative Dentistry and Endodontics
• /
• 제30권5호
• /
• pp.355-362
• /
• 2005

본 연구는 복합레진을 광조사하기 전과 광조사한 후에 표면 전색제인 Biscover를 적용하여 이들에 대한 변연 미세누출을 평가하고, 또한 표면 전색제를 적용하지 않는 복합레진 수복물과의 미세누출 차이를 비교하기 위하여 시행하였다. 30개의 발거된 대구치의 협면 치경부에 5급 와동을 형성하여 다음과 같이 3개의 군으로 분류하였다; 대조군은 복합레진 표면에 Biscover를 적용하지 않은 군, 1군은 복합레진을 광조사하고 마무리한 후 Biscover를 적용한 군, 2군은 복합레진을 광조사하지 않고 Biscover를 적용한 군. 각 군의 시편은 실온의 증류수에 48시간 동안 보관한 후 $5^{\circ}C$와 $55^{\circ}C$에서 1,000회의 열 순환을 시행하고 2% methylene blue용액에 4시간 동안 침적시켰다. 20배율의 광학 입체현미경 하에서 각 군의 교합면측과 치은측 변연의 색소침투 정도를 관찰하여 미세누출 점수를 얻은후, 각군 간의 유의성을 검정하여 다음과 같은 결과를 얻었다. 1. 2군은 1군보다 교합면측과 치은측 변연 모두에서 높은 미세누출을 보였으나 통계학적으로 유의한 차이는 없었다 (p > 0.05). 2. 대조군은 교합면측 변연에서 1군과 2군보다 약간 높은 미세누출을 보였으며 , 치은측 변연에서 1군보다 약간 높게 그리고 2군과 비슷한 미세누출을 보였다 (p > 0.05). 3. 대조군과 2군은 교합면측 보다 치은측 변연에서 통계학적으로 높은 미세누출을 보였으며 (p < 0.05), 1군은 교합면측과 치은측의 변연 미세누출 간에 통계학적인 차이를 나타내지 않았다 (p > 0.05). 본 연구를 종합하면, Biscover는 중합된 복합레진 표면에 적용할 경우 치은측 변연의 미세누출을 감소시키는데 효과적이었다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.174-186
• /
• 1996

The purpose of this study was to evaluate the adaptability to tooth structure of composite resin and glass ionomer cement according to filling methods. In this study. two class V cavities were prepared on the buccal and lingual surface of each tooth of forty extracted human premolars. and they were randomly assigned into 4 groups with 10 teeth. The cavities of each group were filled with the CLEARFIL FII self curing resin(Control Group), Z-100 light curing resin (Group 1). $Vitremer^{TM}$ light curing glass ionomer cement(Group 2) and Z-100 light curing resin over the $Vitremer^{TM}$ liner(Group 3). The specimens underwent temperature changed from $5^{\circ}C$ to $55^{\circ}C$ five hundred times. After thermocycling. specimens were immersed in 2% methylene blue solution and stored in 100% relative humidity at $37^{\circ}C$ for 24 hours. And then. the specimens sectioned buccolingually. Degree of dye penetration at tooth-restoration interfaces were examined by Tool maker's microscope(x 200) and Image analyzer. The results were as follows : 1. On the occlusal margin. among the experimental groups. the group 2 showed the highest dye penetration($2.40{\pm}0.68$) and the group 3 showed the lowest dye penetration($1.15{\pm}0.37$). There was significant difference among the experimental groups(p<0.001). 2. On the gingival margin, among the experimental groups, the group 1 showed the highest dye penetration($3.30{\pm}0.57$) and the group 2 showed the lowest dye penetration($1.65{\pm}0.49$). There was significant difference among the experimental groups(p>0.001). 3. About total degree of dye penetration, the group 1 showed the highest dye penetration($2.25{\pm}1.17$) and the group 3 showed the lowest dye penetration ($1.43{\pm}0.55$). There was significant difference among the experimental groups(p<0.001). 4. The sum of dye penetration at occlusal margin was less than gingival margin. There was significant difference between occlusal margin and gingival margin (p<0.001). The results showed that differences were more pronounced at the gingival margin. Composite restorations inserted over the glass-ionomer liner demonstrated significantly less leakage than single restoration that used composite resin or glass-ionomer cement.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.55-72
• /
• 1993

The aim of this study was to compare the marginal leakage of class II light curing composite resin restoration according to filling methods. With using acid etching technique and dentin bonding agent, various methods were suggested to eliminate or reduce the marginal leakage. In this study, class II cavities were prepared in 100 extracted human premolars with cementum margin(1mm below the CEJ) and the teeth were randomly assigned to 5 groups of 20 teeth each. The teeth in group 1, 2, 3 and 4 were restored by direct filling methods using P-50 and Clearfil Photoposterior of 10 teeth each, but the method of insertion of the restorative materials varied with each group. And the teeth in group 5 were restored by inlay method using Kulzer Inlay and CR Inlay. Filling methods are as follows : Group 1 : The composite resin was inserted in one layer in the proximal box and one layer in the occlusal portion. Group 2 : Insertion was in two equally thick horizontal layers in the proximal box. Group 3 : Insertion was in two diagonally placed layers in the proximal box. Group 4 : The composite resin was inserted in the same way as in group 3 except that a glass ionomer liner was first placed on the axial wall and gingival floor. Group 5 : The teeth were restored by Inlay technique using dure cure resin cement. All the teeth were thermocycled, stained with 1 % methylene blue solution, sectioned mesiodistally, and scored for marginal leakage. To compare the marginal leakage, ANOVA and T-test were used in analysis. The following results were obtained : 1. In direct filling methods, there was no significant difference in marginal leakage at both occlusal and cervical margins. 2. In all groups, occlusal margin showed significantly less leakage than cervical margin. 3. In group using glass ionomer liner, there was no significant reduction of marginal leakage at the cervical margin. 4. The group restored by inlay method showed significantly less marginal leakage than groups restored by direct filling methods at both occlusal and gingival margins. 5. There was no significant difference in each group according to filling materials.

• 대한소아치과학회지
• /
• 제24권3호
• /
• pp.495-510
• /
• 1997

The purpose of this study was to evaluate the efficacy of several surface coating agents in preventing microleakage and increasing microhardness of light-cured glass ionomer restoration. 50 and 25 sound molar teeth were used for the microleakage test and microhardness test respectively. Data were analyzed statistically using Kruskal-Wallis and/or Mann-Whitney test. The results of the present study were as follows: 1. The effect of surface coating in reducing microleakage was proven only at the gingival margin of restorations with statistical significance(p<.05). 2. The distribution of microleakage score at gingival margin was shown to be better than that of occlusal margin in general but with no statistically significant differences(p>.05). 3. No statistically significant differences in microhardness could be found between groups (p>.05) regardless of depth of measurement. 4. Under the present experimental conditions, the types or application of surface coating agents did not impose any significant effect on microhardness of glass ionomer restorative material whereas the protective effect of surface coating in reducing microleakage was partly proven.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.392-398
• /
• 1999

The purpose of this study was to assess the effect of catalase used following bleaching for the elimination of hydrogen peroxide residues from human teeth on the microleakage at the tooth-resin composite interface. In this study, class V cavities were prepared on the buccal or lingual surfaces of seventy extracted human molar teeth, and crown of sixty teeth were immersed in 30% hydrogen peroxide at $37^{\circ}C$ for 5 days except for negative control group. Then the teeth were rinsed with water and distributed randomly into seven groups of 10 each and were conditioned as following Negative control group: No bleaching Positive control group : bleaching and no application of catalase (C-40) Experimental group 1 : one cycle of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 2 : two cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 3 : three cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 4 : four cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 5 : five cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching The cavities of each groups were restored with composite resin. The teeth were thermocycled, stained with 2% methylene blue, and sectioned buccolingually. Degree of dye penetration at tooth-restoration interfaces were examined by stereomicroscope(${\times}30$) at occlusal and gingival margin The results were as follows : 1. On the occlusal margin, there was no significant difference in the microleakage between the negative coltrol group and experimental groups (p>0.05). But on the gingival margin, experimental groups showed higher microleakage than the negative coltrol group (p<0.05). 2. On the occlusal margin, positive coltrol group showed higher microleakage than experimental groups (p<0.05) and among the experimental groups, group 1 showed higher microleakage than group 3, 4, 5 (p<0.05). 3. On the gingival margin, there was no significant difference between the positive coltrol group and experimental groups, and between experimental groups (p>0.05). The result indicated that catalase used in bleached cavity for the elimination of hydrogen peroxide residues from human teeth maybe reduced microleakage at the tooth-resin composite interface.

• Restorative Dentistry and Endodontics
• /
• 제35권3호
• /
• pp.164-172
• /
• 2010

복합레진 수복시, 일반적으로 연마, 산부식, 수세 및 건조 단계를 거쳐 저점도 레진을 적용하는 재접착 술식을 통해 예상되는 수축간극을 봉쇄한다. 그러나, 이 과정은 재접착제 적용 이전에 물이나 잔사가 간극을 매워버릴 수 있어 그 효과가 의심된다. 본 실험에서는 연마 단계 이전, 즉 복합레진을 중합한 직후에 재접착제를 도포한다면 변연누출을 더 줄일 수 있을 것이라는 가설을 검증하고자 하였다. 실험을 위해 35개의 발거한 대구치에서 협면과 설면에 교합면 변연은 법랑질에, 치은측 변연은 상아질에 위치하는 5급 와동을 형성하였다. 와동은 Z250 (3M ESPE, USA)로 충전하였고, 접착제로는 $Adper^{TM}$ Single Bond 2 (3M ESPE)을 사용하였다. 재접착제로는 Biscover LV (Bisco, USA) 레진 전색제와 ScotchBond Multi-purpose system (3M ESPE)의 접착제, 및 점도가 낮은 실험용 접착제를 연마 전 또는 일련의 연마 및 산부식 후 수복물의 변연에 적용하였다. 2% 메틸렌 블루 용액에 네 시간 동안 침적한 뒤 교합측 및 치은측 변연에서의 색소 침투 깊이를 광학 입체 현미경으로 측정하였다. 재접착제의 점도와 변연미세누출의 상관관계도 평가하였다. 재접착 술식, 재접착제, 및 변연의 위치, 그 각각에서는 통계적으로 유의한 차이를 관찰할 수 없었다. 그러나, 재접착 술식을 시행하지 않은 대조군의 경우에는 세 가지 재접착제를 사용한 재접착군에 비해 치은측 변연에서 미세누출이 통계적으로 유의하게 크게 나타났다(p < 0.05). 대조군과 재접착군의 미세누출의 차이는 교합측 변연에서는 관찰되지 않았다. 연마 및 산부식 후 치은변연에 재접착제를 적용한 경우에서 약한 음의 상관관계(r = -0.326, p = 0.041)를 보인 경우를 제외하고는, 재접착제의 점도와 미세누출은 유의한 상관관계를 보이지 않았다.

• 대한소아치과학회지
• /
• 제29권1호
• /
• pp.57-68
• /
• 2002

고동아말감수복시 프라이머 및 상아질접착제의 변연봉쇄효과를 비교검토하기 위하여 발거된 소구치 100개의 치아 협면에 5급 와동을 형성하고 대조군과 실험군으로 나누어 $Copalite^{(R)}$와 프라이머 및 상아질접착제를 적용하였다. 고동아말감합금인 $Luxalloy^{(R)}$로 충전한후 변연누출의 정도를 측정하고 주사전자현미경을 이용해 치질과 아말감과의 경계면을 관찰하여 다음과 같은 결론을 얻었다. 1. 교합측과 치은측에서 실험군은 모두 대조군보다 유의하게 적은 변연누출을 보였다(p<0.05). $Copalite^{(R)}$를 적용한 군은 나머지 실험군에 비해 많은 변연누출을 보였다(p<0.05). 2. 모든 실험군의 변연누출은 치은측이 교합측보다 많았다. 3. 산부식 처리, 프라이머 적용후 접착제사용 및 프라이머와 접착제의 혼합사용이 변연누출에 영향을 미치지 못하였다(p>0.05). 4. 주사전자현미경 소견에서는 대조군과 $Copalite^{(R)}$를 적용한 군에서 아말감과 와동벽사이에 연속적인 틈이 관찰되었으나, 나머지 실험군에서는 틈이 프라이머나 접착제층으로 채워져 있었다. 이상의 결과로 보아 고동 아말감합금의 사용시에 프라이머나 상아질접착제가 변연누출방지에 효과적이며, $Copalite^{(R)}$는 변연누출방지에 비효율적이다.

• 대한소아치과학회지
• /
• 제23권2호
• /
• pp.389-400
• /
• 1996

In Class II amalgam restoration in deciduous molar, failure rate and incidence of recurrent caries are high as children become older. In order to preserve deciduous molars till the physiologic exfoliation time, stainless steel crown is a choice of the treatment. As a result of a careless treatment, such as overhanging margin, poor marginal adaptation, poor proximal contour and inadequate mesiodistal width give rise to interfering eruption of the adjacent teeth, recurrent caries and chronic gingival irritation and insufficient arch length respectively. In this study, 252 s.s. crowned teeth extracted due to physiologic exfoliation or periapical lesion. The purpose of this study is to analyze the marginal adaptation of stainless steel crown to the deciduous molar in order to obtain better clinical result. The results were as follows : 1. Between the length of s.s. crown and the marginal gap of crown, positive correlations were shown. 2. Largest amount of marginal gap was shown at buccal side in upper deciduous molars and lower first deciduous molar, lingual side in lower second deciduous molar. But no significant diffrence were found statistically compared to second most largest one. 3. Incidence of exposed restoration and recurrent caries were higher in proximal surface than buccal/lingual surface. And extension of restoration below the margin of s.s. crown gives rise to higher rate of recurrent caries. 4. Defect of contour was found in 34%, frequently found in lower 1st deciduous molar and upper 1st deciduous molar. 5. Marginal polishing defects were found in 23%. 6. Ledge was formed in 10% especially in lower 1st deciduous molar and lower 2nd deciduous molar. 7. 16% of the teeth had wear facet due to traumatic occlusion, 7% of them had occlusal perforation.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.47-61
• /
• 1998

The purpose of this study was to compare the microleakage pattern of glass ionomer with resin restoration in microleakage pattern of primary and permanent teeth. Microscopical observation of interface between tooth structure and restoration was also performed. 80 and 8 sound molar teeth were used for the microleakage test and SEM study respectively. Data were analyzed statistically using ANOVA test and/or t-Test. The results of the present study were as follows: 1. According to the result of microleakage pattern between primary and permanent tooth, primary tooth generally showed more micro leakage than permanent tooth in all groups (p<.05). 2. In the resin-filled groups, occlusal margin was shown to have more microleakage than gingival margin(p<.05). Whereas the glass ionomer-filled groups showed no statistically significant differences between them(p>.05). 3. No statistically significant differences in microleakage could be found between two different resin groups(p>.05), while Fuji II LC group showed less microleakage than Ketac-Fil group(p>.05). 4. The various type hybrid layer was evident under SEM in resin-filled groups both in primary and permanent teeth with generally thicker layer in primary group. Among glass-ionomer group, Fuji II LC group showed more intact adhesion to tooth surface than Ketac-Fil group

• Restorative Dentistry and Endodontics
• /
• 제32권5호
• /
• pp.437-444
• /
• 2007

이 연구는 거친 입자와 미세한 입자의 다이아몬드 포인트로 형성한 5급 와동에서 서로 다른 2단계 접착시스템 사용시 법랑질과 상아질 변연에서의 미세누출 차이를 상호 비교하기 위하여 시행하였다. 40개의 발거한 대구치의 협면 치경부에 각각 $106-205\;{\mu}m$의 거친 다이아몬드 포인트 (EX-41)와 $53-63\;{\mu}m$의 미세한 다이아몬드 포인트 (TF-21F)를 이용하여 20개씩 5급 와동을 형성한 후 사용된 접착시스템과 복합레진에 따라 다음과 같이 4개의 군으로 분류하였다; 1군은 EX-41 포인트로 형성한 와동에 Single Bond와 Z 250을 사용한 군, 2군은 TF-21F 포인트로 형성한 와동에 Single Bond와 Z 250을 사용한 군, 3군은 EX-41 포인트로 형성한 와동에 Clearfil SE Bond와 Clearfil AP-X를 사용한 군, 4군은 TF-21F 포인트로 형성한 와동에 Clearfil SE Bond와 Clearfil AP-X를 사용한 군으로 분류하였다. 각 군은 $5^{\circ}C$와 $55^{\circ}C$의 증류수에서 500회 열 순환한 후 2% methylene blue용액에 1일 동안 침적하였다. 각 군의 치아를 협설로 절단하여 광학 입체현미경 하에서 법랑질과 상아질 변연에서의 색소침투 정도를 관찰하여 미세누출 점수를 평가하고, 각 군 간의 유의성을 검정하여 다음과 같은 결과를 얻었다. 이 연구를 종합하면, 5급 와동에서 Single Bond는 이 연구에 사용한 다이아몬드 포인트의 종류에 따른 변연 미세누출 차이를 보이지 않았으나 Clearfil SE Bond는 거친 다이아몬드 포인트 보다는 미세한 다이아몬드 포인트를 사용하는 것이 법랑질과 상아질 변연 모두에서 낮은 미세누출을 보였다.