• 제어로봇시스템학회논문지
• /
• 제22권4호
• /
• pp.253-265
• /
• 2016

We propose an obstacle classification method using multi-decision factors and decision sections based on Single 2D LiDAR. The existing obstacle classification method based on single 2D LiDAR has two specific advantages: accuracy and decreased calculation time. However, it was difficult to classify obstacle type, and therefore accurate path planning was not possible. To overcome this problem, a method of classifying obstacle type based on width data was proposed. However, width data was not sufficient to enable accurate obstacle classification. The proposed algorithm of this paper involves the comparison between decision factor and decision section to classify obstacle type. Decision factor and decision section was determined using width, standard deviation of distance, average normalized intensity, and standard deviation of normalized intensity data. Experiments using a real autonomous vehicle in a real environment showed that calculation time decreased in comparison with 2D LiDAR-based method, thus demonstrating the possibility of obstacle type classification using single 2D LiDAR.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.110-115
• /
• 2004

Examine merits and demerits and obstacle factor that exist to all direction of digital infratechnology that is supplied on industry whole according to development special quality of computer by development of computer and Information Technology and electricity electron information communication facility that basic impulse insulation level does not exist examined scorched earth or an interference problem factor and countermeasure of semiconductor degauss of factor and electricity electron information transmission system that is numbed or causes system down.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.158-167
• /
• 1997

For the use of a mobile robot in dynamic environment, a collision-avoidance algorithm with moving obsta- cle is necessary. In this paper, a collsion-avoidance algorithm of a mobile robot is presented, when a mobile robot detects the collision with moving obstacle on the navigational path. Using reported positions of moving obstacle with sensors, the mobile robot predicts the next position of moving obstacle with possibility of collision. The velocity of moving obstacle is modeled as random walk process with Gaussian distribution. The optimal collision-avoidance path in which turning motion of the mobile robot is considered is generated with relative velocity between the mobile robot and moving obstacle. For the safety of collision-avoidance path, attractive potential with the safety factor is suggested. The simulation results using this algorithm show the mobile robot avoids collision with moving obstacle in many cases.

• 한국응급구조학회지
• /
• 제20권3호
• /
• pp.95-105
• /
• 2016

Purpose: The purpose of the study was to examine the career obstacle factors and career identity according to career choice type among paramedic students. Methods: A self-reported questionnaire was completed by 234 paramedic students in C area from August 25 to September 3, 2015. The questionnaire consisted of general characteristics of the subjects, career obstacle factors, career identity, and types of career choice. The data were analyzed by t test, ANOVA, post hoc $Scheff{\acute{e}}$ test, Pearson's correlation analysis, and multiple regression analysis using SPSS v. 20.0. Results: Career obstacle factors and career identity of paramedic students had significant differences on motivation of university choice, major satisfaction, and job preference. A stable type of career choice showed a significantly lower score for career obstacle factors and a higher score for career identity. Career identity had a strongly positive relationship with major satisfaction and had a negative relationship with career obstacle factors. Logistic regression analysis revealed that the main variables affecting career identity were types of career choice, motivation of university choice, major satisfaction, and career obstacle factors. The explanatory power was 58.0%. Conclusion: The development of a career integrity enhancement program can solve the career obstacle factors for paramedic students.

• 한국태양에너지학회 논문집
• /
• 제39권1호
• /
• pp.77-89
• /
• 2019

The solar air heater has various performances according to an obstacle installed in the air duct. Many studies on thermal performance have been conducted. But many of these studies were using a kind of rib type obstacle attached at the bottom of absorbing plate, but they are so hard to be manufactured. In this study, characteristics of the heat transfer and pressure drop in the solar air heater with various horizontal rectangular obstacles was investigated by CFD (Computational Fluid Dynamics) analysis. As a result, the heat transfer performance was improved from 1.2 to 3.32 times depending on installation conditions of rectangular obstacle. The pressure drop, however, also increased with increment of heat transfer performance from 2.8 to 180 times only by changing installation conditions of rectangular obstacle. Thus, the performance factor presenting the thermal performance enhancement on the same pressure drop was also confirmed. As a result, the highest value of 0.828 as better performance factor was obtained at the lower height of rectangular obstacle and this value has started to decrease with increment of heat transfer performance. In the end, it could be confirmed that the pressure drop was carried higher than the quantity of improvement of the heat transfer performance when the heat transfer performance was increased by change of installation conditions of rectangular obstacle. Both heat transfer enhancement and pressure drop to be required for system need to be considered before the rectangular obstacles are applied to the solar air heater.

• 정보보호학회논문지
• /
• 제24권5호
• /
• pp.951-959
• /
• 2014

최근 들어 세계적으로 정보자산 유출에 대한 문제가 대두되고 있다. 국가정보원에 따르면, 2003년부터 2013년까지 총 375건의 해외 기술 유출을 적발했으며, 특히 2013년 한 해에만 49건이 적발되는 등 시간이 갈수록 증가 추세를 보이고 있다. 이는 기업에서 정보보호 관리체계를 수립 운용하고 이를 인증 받아야 할 필요성이 있음을 뜻한다. 하지만 ISMS 인증을 받기 위해서는 아직까지 이미 드러난, 혹은 아직 드러나지 않은 장애요인들이 상당히 존재하며, 관련 연구 또한 아직 부족하다. 따라서 본 연구에서는 기업이 ISMS 인증 시에 어떤 장애요인을 가지고 있는지 탐색적 요인 분석 기법을 이용하여 실증적으로 분석하였다. 연구 결과, 심사 난이도 및 기간, 컨설팅 업체 관련 요인, 인증 선행 사례 및 컨설팅 인력 자질, 내부적 요인, 인증기관 신뢰도 및 심사 비용, 인증 혜택 관련 요인과 같이 총 여섯 개의 압축된 요인을 도출하였다.

• 한국항해항만학회지
• /
• 제39권6호
• /
• pp.515-521
• /
• 2015

본 연구는 Fuzzy-AHP를 이용하여 한 중 카페리 피견인 트레일러 상호주행 시 장애요인의 가중치 분석을 연구의 목적으로 하였다. 이를 위해 본 연구에서는 문헌연구를 통해 1차적으로 요인을 선정한 후, 현 카페리업체에 종사 중인 화물 전문가집단과의 Indepth-Interview를 수행하여 요인을 최종 선정하였다. 선정된 상위 장애 요인은 불안정적 서비스 제공, 제한적 정책 지원, 추가 비용 발생이며, 이중 불안정적 서비스 제공이 가장 큰 장애요인으로 분석되었다. 선정된 측정변수 11가지 항목은 화물 장치장 공급 부족, 트레일러 보험 및 관리 문제, 특수장비 부족, 전문화된 인력부족, 투입 서비스 항로의 제한, 마케팅 홍보 전략의 부족, 수속 비용 증가 등이며, 이중 불균형 화물 집화에 따른 장비 회송 비용 증가가 가장 큰 장애 요인으로 분석되었으며, 서비스 항로의 제한, 특수장비 부족, 수속의 지연 및 추가 절차 발생이 그 뒤를 이었다.

• 한국전문물리치료학회지
• /
• 제18권3호
• /
• pp.16-25
• /
• 2011

This study aimed to evaluate factors related to the ability of ambulatory patients with cerebral palsy (CP) to walk over vertical and horizontal obstacles. Twenty patients with spastic CP who were able to walk independently for at least 10 m with or without walking devices were recruited for the study. Participants were required to walk over small obstacles (1, 4, and 8 cm in height or width; total of 6 conditions). A 'fail' was recorded when either the lower limbs or the walking device contacted the obstacle. Linear regression analyses were used to determine the effects of age, sex, walking devices, eyeglasses, subtype (hemiplegia or diplegia), ankle foot orthoses, functional level, and score of body mass index on the ability of obstacle crossing. Fifteen participants (75%) failed to adequately clear the foot or walking device over obstacles in at least 1 condition. The chance of failure in crossing vertical obstacle was affected by the use of ankle foot orthoses, eyeglasses, gender, and CP subtype (p<.05). The failure rate crossing horizontal obstacle was affected by CP subtype. These findings suggest that rehabilitation procedures should (1) consider the clinical characteristics of patients in order to prepare them to be more independent while performing daily activities, and (2) incorporate environmental conditions that patients encounter at home and in the community.

• 한국멀티미디어학회논문지
• /
• 제23권8호
• /
• pp.1088-1098
• /
• 2020

This paper proposes an obstacle avoidance method using a depth polar grid. Depth information is a crucial factor for determining the safe path for collision-free navigation of unmanned aerial vehicles (UAVs) as it can perceive the distance to the obstacles effectively. However, the existing depth-camera-based approaches for obstacle avoidance require computational y expensive path planning algorithms. We propose a simple navigation method using the polar-grid of the depth information obtained from the camera with narrow field-of-view(FOV). The effectiveness of the approach was validated by a series of experiments using software-in-the-loop simulation in a realistic outdoor environment. The experimental results show that the proposed approach successfully avoids obstacles using a single depth camera with limited FOV.

• 한국태양에너지학회 논문집
• /
• 제38권2호
• /
• pp.33-43
• /
• 2018

PV/Thermal module is the combined system, which consist of a photovoltaic module and solar thermal collector that can obtain electrical power and thermal energy simultaneously. Thus the power generation can be increase by decreasing the temperature of photovoltaic module and thermal energy retrieved from module also can be used for heating system. In this study, Heat transfer performance of air type PV/Thermal module was confirmed with various bottom obstacles that can be installed easily to real photovoltaic module by CFD (computational fluid dynamics) analysis. Eight type obstacles were investigated according to the shape and arrangement. As a result, nusselt number represent heat transfer performance was increased about 86% compare with the basic type PV/Tthermal module that has no obstacle and triangle type obstacle had higher value than other types. But pressure drop was also increased with increment of heat transfer enhancement. Thus the performance factor considering both heat transfer and pressure drop was confirmed and V-fin type obstacle arranged in a row for Reynolds number below 9,600 and protrusion type obstacle arranged in zigzag for Reynolds number above 14,400 were shown higher performance factor than other types. From these results, V-fin type obstacle arranged in row and protrusion type obstacle arranged in zigzag were considered as a proper type for applying to real PV/thermal module according to operating condition. But the heat transfer performance can be changed by the geometric conditions of obstacle such as height, width, length and arrangement. Thus, it could also confirmed that the optimal condition and arrangement of this obstacle need to be found in further study.