• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1063-1068
• /
• 2000

Water treeing in underground distribution power cable is not easy to observe by nondestructive method and it has very complex patterns. This study describes the principles and practices of a continuous observation of initiation and growth of tree in polymeric insulation material using an image measurement technique. Using this technique we could observe water tree and the growing process of electrical tree due to the water tree and the growing process of electrical tree due to the water tree. All of these growing process is analyzed quantitatively by image measurement program composed of borland c++. We fabricated the thin film type specimen to observe water tree easier and also the needle electrode was prepared by etching method using electrolytes. Initiation and the growth of three was observed somewhat different depending on the applied voltage and the water electrode. AgNO$_3$solution electrode accelerates the initiation and the growth of water tree, compared to those of distilled water electrode. The water and the electrical tree occurred by water tree has discontinuous growth characteristic.

• 한국융합학회논문지
• /
• 제6권5호
• /
• pp.207-217
• /
• 2015

형사소송절차에 있어서 탄핵증거규정상에는 다양한 논란이 광범위하게 발생한다. 이러한 문제점을 해결하는 방법으로 본고에서는 대법원판례 및 외국의 입법례 등을 종합 분석(연구방법)하였으며 특히, 대법원판례 등에서 강조하고 있는 적정절차원칙은 탄핵증거규정에서도 반드시 준수되어야 한다는 점을 재인식하였다(연구결과). 탄핵증거규정은 형사소송법 제312조 내지 제316조에 의하여 증거능력이 인정되지 않은 증거일지라도(위법성을 띤 증거) 진술의 증명력을 탄핵하는데 이를 사용함으로써 실체진실발견에 가장 중요한 역할을 수행하는 증인 등(피고인 포함)의 증언은 소송상 극단적인 제한을 받을 수밖에 없다. 본고에서는 첫째 탄핵증거의 범위 둘째 증명력감쇄 등에 대한 문제 셋째 탄핵증거로 인한 증인 등의 지위 등을 연구해 보았다. 그런데 이러한 제 문제의 해결(결론)은 불법적인 절차를 배제하면서 적정절차원칙의 준수를 통해야만 융합적인 해결이 가능하다는 점이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 추계학술대회논문집
• /
• pp.122-130
• /
• 1996

During the cold forming, due to high working pressure acting on the die surface, failure mechanics must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. Die wear affects the tolerances of formed parts, metal flow and costs of process etc. The only way to control these failures is to develop methods which allow prediction of die wear and costs of process etc. The only way to control these failures is to develop methods which allow prediction of die wear and which are suited to be used in the design state in order to optimize the process. In this paper, the wear experiments to abtain the wear coefficients and the upsetting processes was accomplished to observe the wear phenomenon during the cold forming process. The analysis of upsetting processes was accomplished to observe the wear phenomenon during the cold forming process. The analysis of upsetting processes was accomplished by the rigid-plastic finite element method. The result from the deformation analysis was used to analyse the die wear during the processes and the predicted die wear profiles were compared with the measured die wear profiles.

• 천문학회보
• /
• 제46권2호
• /
• pp.56.3-56.3
• /
• 2021

In a ΛCDM universe, most galaxies are believed to evolve by mergers and accretions. The debris resulting from such processes remains faint and/or diffuse structures, such as tidal streams and stellar halos. Although these structures are a good indicator of the recent mass assembly history of galaxies, they have the disadvantage of being difficult to observe due to their low surface brightness (LSB). To recover these LSB features by reducing the photometric uncertainties introduced by the optics system, we attempt to develop an optimized telescope, called a linear astigmatism free-three mirror system, that minimizes the loss and scattering of light within the telescope. With that prototype, we observe NGC 5907, known as a nearby galaxy with a fabulous loop structure(s), to inspect its performance. After a dedicated data reduction process, including flat-fielding with dark sky flat and sky subtraction, our observation reaches a 1σ surface brightness limit of μlim,r ≃ 28.3 mag arcsec-2 in 10×10 arcsec boxes. We finally identify a single tidal stream that is likely the remnant of a nearly disrupted galaxy. This finding emphasizes that the capability of LSB detection with our telescope is comparable to that of much larger telescopes.

• 한국재료학회지
• /
• 제23권10호
• /
• pp.580-585
• /
• 2013

To observe the formation of defects at the interface between an oxide semiconductor and $SiO_2$, ZnO was prepared on $SiO_2$ with various oxygen gas flow rates by RF magnetron sputtering deposition. The crystallinity of ZnO depends on the characteristic of the surface of the substrate. The crystallinity of ZnO on a Si wafer increased due to the activation of ionic interactions after an annealing process, whereas that of ZnO on $SiO_2$ changed due to the various types of defects which had formed as a result of the deposition conditions and the annealing process. To observe the chemical shift to understand of defect deformations at the interface between the ZnO and $SiO_2$, the O 1s electron spectra were convoluted into three sub-peaks by a Gaussian fitting. The O 1s electron spectra consisted of three peaks as metal oxygen (at 530.5 eV), $O^{2-}$ ions in an oxygen-deficient region (at 531.66 eV) and OH bonding (at 532.5 eV). In view of the crystallinity from the peak (103) in the XRD pattern, the metal oxygen increased with a decrease in the crystallinity. However, the low FWHM (full width at half maximum) at the (103) plane caused by the high crystallinity depended on the increment of the oxygen vacancies at 531.66 eV due to the generation of $O^{2-}$ ions in the oxygen-deficient region formed by thermal activation energy.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.15-21
• /
• 2014

The utilization range of mobile devices is becoming broader than before due to the rapid development of the mobile market. Furthermore, the demands for computer-aided management are increasing due to the extensive expansion of the installation of solar street lights. In this paper, we propose a system which can be used to observe solar street lights. The manager of the system can control and manage the solar street lights using video images on a mobile device.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.90-96
• /
• 2013

During the cold forming, due to high working pressure acting on the die surface, failure mechanics must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. Die wear affects the tolerances of formed parts, metal flow and costs of process etc. The only way to control these failures is to develop methods which allow prediction of die wear and which are suited to be used in the design state in order to optimize the process. In this paper, the wear experiments to obtain the wear coefficients and the upsetting processes was accomplished to observe the wear phenomenon during the cold forming process. The analysis of upsetting processes was accomplished by the rigid-plastic finite element method. The result from the deformation analysis was used to analyse the die wear during the processes and the predicted die wear profiles were compared with the measured die wear profiles.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.257-257
• /
• 2011

The amorphous indium-gallium-zinc-oxide (a-IGZO) materials for use in high performance display research fields are strongly investigated due to its good performance, such as high mobility and better transparency. However, the stability of a-IGZO materials is increasingly becoming one of critical issues due to the sub-gap electron trap sites induced by rough interfaces during deposition processing. It is well-known that the threshold voltage shift is related to interface roughness and oxygen vacancy formed by breaking weak chemical bonds. Here, we report the better properties of transparent oxide transistors by reducing the threshold voltage shift with an external rf plasma supported magnetron sputtering system. Mainly, our sputtering method causes the surface of sample to be sleek, so that it prevents the formation of various defects, such as shallow electron trap sites in the interface. External rf power was applied from 0 to 50W during RF sputtering process to enhance the stability of our oxide transistor without having a large voltage shift. To observe the effects of external rf-plasma source on the properties of our devices, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Transmission Electron Microscopy (TEM) are carried out to observe surface roughness and morphology of sputtered thin film. In addition, typical electrical properties, such as I-V characteristics are analyzed.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.133-138
• /
• 2005

The deformation of sheet metal due to the residual stress during blanking or piercing process, is numerically simulated by means of a commercial finite element code. Two dimensional plain strain problem is solved and then its result is applied to the deformation analysis of the lead frame. The plain strain element is applied to the 2D problem to observe the Von Mises equivalent stress concentration at the both shearing edges. As the punch penetrates into the sheet material, the stress concentration generated on both edges is getting increased to be the shearing surface. The limits of the punching depth applied to the simulation is 16% and 24% of the sheet thickness for the plain strain element and the hexahedral element, respectively. The hexahedral element and the limit of punching depth were applied to the deformation analysis of the lead frame for the blanking process. The FEM results for the lead deformation were very good agreement with the experimental ones. This paper shows that the coarse mesh has enabled to analyze the lead deformation generated due to the blanking mechanism. This simple approach to save the calculation time will be very effective to the design of the blanking tools in industries.

• 대한안전경영과학회지
• /
• 제22권2호
• /
• pp.39-46
• /
• 2020

This paper recognizes the risk of ignition of air fryer (machine that can cook fried dishes with hot air without oil) that is far exceeding the sales rate of microwave ovens, which is necessary to modern household kitchen, and identifies fire risk through the operation principle of the process of heat transfer, and the main structure of the machine. The fire test that we conducted is to observe the risk of ignition of the machine due to the damage to the safety system and the possibility of igniting oil paper along with food, to experiment with the possibility of ignition due to blockage of the exhaust due to obstacles, and accumulation of oil stains on the hot wire, and to present the method of fire control and devise countermeasures.