• Journal of The Korean Society of Clinical Toxicology
• /
• v.10 no.2
• /
• pp.73-79
• /
• 2012

Purpose: The purpose of this study was to identify the changes in the characteristics of patients with carbon monoxide (CO) poisoning, as well as the distinctive differences in intentionally exposed patients. Methods: The medical records of CO poisoning patients, who visited nine emergency departments between January 2010 and December 2011, were reviewed retrospectively. The clinical information including age, gender, hospitalization, type of discharge, cause and location of exposure, site of onset, concentration of initial blood carboxyhemoglobin (COHb), methods of treatment and presence of neurological complications was examined. The subjects were divided into an intentional and non-intentional group and the differences between them was compared. Results: A total 209 subjects were recruited. The median age was 38 years (29~49.5 years). They frequently complained of nausea and vomiting, and the most common exposures occurred in winter, normally in the home. The cause of exposure was usually fire, followed by incomplete combustion of fuels. The median initial blood COHb was 13.15%. The proportion of intentionally exposed patients was 21%. They were significantly younger, more frequently discharged against medical advice, and showed a higher initial blood COHb level (22.85%) than the non-intentional group. Conclusion: This study suggests that those with intentional CO poisoning are normally discharged against medical advice even when they have a higher initial COHb level. An adequate explanation of the delayed neurologic sequelae and short term follow-up observation is recommended for those patients with intentional exposure.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.52-67
• /
• 2008

Recently, frequent occurrence of flash floods caused by climactic change has necessitated prompt and quantitative prediction of precipitation. In particular, the usability of rainfall radar that can carry out real-time observation and prediction of precipitation behavior has increased. Moreover, the use of distributed hydrological model that enables grid level analysis has increased for an efficient use of rainfall radar that provides grid data at 1km resolution. The use of distributed hydrologic model necessitates grid-type spatial data about target basins; to enhance reliability of flood runoff simulation, the use of visible and precise data is necessary. In this paper, physically based $Vflo^{TM}$ model and ModClark, a quasi-distributed hydrological model, were used to carry out flood runoff simulation and comparison of simulation results with data from Imjin River Basin, two-third of which is ungauged. The spatial scope of this study was divided into the whole Imjin River basin area, which includes ungauged area, and Imjin River basin area in South Korea for which relatively accurate and visible data are available. Peak flow and lag time outputs from the two simulations of each region were compared to analyze the impact of uncertainty in topographical parameters and soil parameters on flood runoff simulation and to propose effective methods for flood runoff simulation in ungauged regions.

• Korean journal of applied entomology
• /
• v.56 no.1
• /
• pp.29-39
• /
• 2017

To compare the features of ground-dwelling invertebrates according agroecosystems, we selected paddy fields, dry fields, orchards in the Eastern region of Korea. The surveys were performed by using pit-fall traps twice per year from 2013 to 2015. Total 6,420 individuals of 172 species belonging to 13 orders, 58 families were investigated in the Eastern region, the species of Hymenoptera (38.26%), Orthoptera (16.28%) accounted large portion of the communities. In the geographical observation, invertebrates were caught was 2,983 individuals in Gyeongsangnam-do, the diversity index of Gyeongsangbuk-do community was higher than of the others and abundance and species richness of paddy field were higher than from dry field or orchard. To understand the relation between taxonomic groups and environmental factors, we carried out the canonical correspondence analysis and hierarchical clustering. As a result, Homoptera, Blattaria, Isoptera, and Coleoptera were positively related to soil pH, soil temperature, and moisture contents, and negatively related to the others. Invertebrate community also were patterned dependently by type of ecosystems. This results were shown that distribution of invertebrates is a few influenced the relationship of the space habituated invertebrates and environmental factors.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.191-198
• /
• 1977

This study was conducted to determine the inheritance to bacterial leaf blight in rice. Varieties used in the study were IR1544-349-2, IR1698-237-2, IR1529-680-3, IR28, IR29, RP663-337-7-8-4-1-1, RP291-20, 62-595 and Kele. The isolate of bacteial leaf blight used was 71-23, 76-1 of Xanthomonas oryzae. $F_1s$ were obtained from crosses between resistant and susceptible varieties. Field observation was made from the Parents, $F_1s$ and $F_2$ sagregating population. The result is summaryzed as fallow: 1) The resistance to the bacterial leaf blight (71-23) derived from cultivars IR1529-680-3, IR28, IR29, RP663-337-7-8-4-1-1, RP291-20 and 62-595 was controlled by a single dominant gene. 2) The resistance to the bacterial leaf blight (71-23) derived from cultivars IR1545-339-2, IR1544-340, IR1698-237-2 and Kele was controlled by a single recessive gene. 3) The resistance to the bacterial leaf blight (76-1) derived from cultivars IR1545-339-2, IR1544-340, IR 1698-237-2 was controlled by a single dominant gene. 4) Degree of resistance to the bacterial leaf blight and genetic type were different depending on isolates within the same resistant cultivar. 5) There was no relation between resistance to the bacterial leaf blight and heading days.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• Journal of Acupuncture Research
• /
• v.24 no.4
• /
• pp.143-155
• /
• 2007

Objectives: To observe the effect of acupuncture and nerve block combination treatment on adhesive capsulitis patients. Methods : 59 voluntary patients were randomly assigned to acupuncture treatment group(E group, n=22), nerve block treatment group(W group, n=17) and acupuncture and nerve block combination treatment group(EW group, n=20). The E group received acupuncture treatment on LI15, $TE_{14}$, $GB_{21}$ and Master Dong's acupuncture points, Shin-gwan and Gyun-joong, twice a week for 4 weeks. The W group received suprascapular nerve block, subacromial injection and trigger point injection, twice a week for 4 weeks. The EW group received the same treatment as the W group and after 5minutes of rest, successively received the treatment identical to that of E group. All three groups were instructed to practice groups were instructed to practice self exercise during their daily lives. Evaluations were made before treatment and after 1, 2, 3 and 4week treatment. Constant Shoulder Assessment(CSA), Shoulder Pain and Disability Index(SPADI), Range of Motion(ROM), the patient's treatment satisfaction measured by Visual Analogue Scale(VAS) and Digital Infrared Thermographic Imaging(DITI) were used as assessment tools. The obtained data were analyzed and compared. Results : The E group showed significant improvement(p<0.05) on CSA, SPADI, VAS and DITI. As for ROM, Adduction and Extension improved significantly(p<0.05). The W group showed significant improvement(p<0.05) on CSA, SPADI, VAS and DITI. As for ROM, Abduction and Extension improved significantly. The EW group showed significant improvement(p<0.05) on CSA, SPADI and VAS. As for ROM, Adduction, Abduction, Extension and Flexion improved significantly. The improvement of CSA, VAS and Abduction ROM in the EW group was significantly(p<0.05) superior compared to the groups treated with single type of treatment. Conclusion : It is suggested that acupuncture and nerve block combination treatment for adhesive capsulitis patients is more effective than the two single treatments. Through further studies, the acupuncture and nerve block combination treatment model may be developed into East-West Collaboration Model in treating adhesive capsulitis.

• Journal of Aquaculture
• /
• v.11 no.1
• /
• pp.99-103
• /
• 1998

Artemia often observed as a co-existing organism in the mass culture tank of marine rotifer. The rotifer and Atremia are commonly used as food organisms in the marine fish larvae rearing. In this study, interspecific relation between the rotifer Brachionus rotundiformis (formely called S-type) and anostracan Artemia of the two developmental stages (0 and 19 day old after hatching) were investigated in the larboratory. The population growth of B. rotundiformis and one of the stage (nauplius or adult) of Artemia in mixed culture was compared with that of each single species culture. Culture period was 16 days. Every two days, the number of organisms in each species was counted and transferred to a fresh medium containing $7{\times}10^5$cells/ml of food Nannochloropsis oculata. Culture volume, temperature, salinity and photoperiod were set at 40ml, $25^{\circ}C.$, 22ppt and 24h all dark except to observation time, respectively. The rotifer population growth was greatly decreased by co-existence with Artemia. The coexisting Artemia suppressed the rotifer population growth due to it's high filtering speed for food (N. oculata). This study suggested that contamination by Artemia must be prevented for the stable rotifer production in the rotifer mass culture tank.

• Composites Research
• /
• v.31 no.5
• /
• pp.209-214
• /
• 2018

This paper explain about the development of environmental friendly, low cost and stable supply material i.e., rice husk and shell were used as micro incorporating bio waste filler. Those were processed by ball mill and analyzed through micro observation by FE-SEM, EDS and particle size distribution. The obtained filler was mixed with epoxy resin for the manufacturing of CFRP composite and study tensile properties. In EDS analysis main contents of rice husk and rice husk ash are C, O and Si. When rice husk was burned C and Si ration were increased. Shell powder has C, O and Ca. It caused $CaCO_3$ from shell. Surface weighted mean of rice husk powder is $6.19{\mu}m$ and volume weighted mean is $14.77{\mu}m$. And it has rod type particles which caused hair and husk structure parts. Surface weighted mean of rice husk ash powder is $1.55{\mu}m$ and volume weighted means is $8.20{\mu}m$. Surface weighted mean of shell powder is $2.53{\mu}m$ and volume weighted mean is $5.79{\mu}m$. The tensile decreased with increasing the content of micro filler in CFRP composites. In case of rice husk, the significant decrement of tensile strength was observed. and in case of shell powder, there is no effect of changes take place in tensile strength.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.351-356
• /
• 2012

Ultrasonic cavitation is a physical phenomenon that generates and collapses microbubbles in media (mainly fluids) under conditions of strong ultrasonic irradiation. In this study, changes in the ultrasonic acoustic characteristics of bubble clouds in relation to ultrasonic irradiation were observed by the quantitative evaluation of cavitation yields. Concave-type single ultrasonic transducers with center frequencies of 500 kHz and 1.1 MHz were used to produce cavitation, and 2.25 MHz interference ultrasonic waves that would traverse any bubble clouds generated were used to analyze the cavitation. The parameters used for the evaluation of cavitation yields (changes in the center frequency, attenuation characteristics, and the propagation time of penetrating waves) were analyzed in relation to the cavitation-generating conditions (irradiation intensity, excitation signal, and center frequency). On the basis of these results, correlations between the changes in the center frequency and irradiation intensity were identified. Although the correlation coefficient was low, notable changes were observed in the center frequency under certain irradiation conditions. Attenuation trends in the interference ultrasonic waves showed high correlations with all the irradiation conditions, and it was noted that these trends were not affected by the forms of cavitation generated. No differences in the propagation time were observed among different irradiation conditions. These findings suggest that bubble yields can be quantitatively evaluated effectively by evaluating the diverse irradiation conditions and that such a quantitative evaluation could be used to study the basic cavitation phenomenon occurring in high-intensity ultrasonic wave treatment.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.1-14
• /
• 2015

The standard GARCH model imposing symmetry on the conditional variance, tends to fail in capturing some important features of the data. This paper, hence, introduces the models capturing asymmetric effect. They are the EGARCH model and the GJR model. We provide the systematic comparison of volatility models focusing on the asymmetric effect of news on volatility. Specifically, three diagnostic tests are provided: the sign bias test, the negative size bias test, and the positive size bias test. This paper shows that there is significant evidence of GARCH-type process in the data, as shown by the test for the Ljung-Box Q statistic on the squared residual data. The estimated unconditional density function for squared residual is clearly skewed to the left and markedly leptokurtic when compared with the standard normal distribution. The observation of volatility clustering is also clearly reinforced by the plot of the squared value of residuals of export volume and values. The unconditional variance of both export volumes and export value indicates that large shocks of either sign tend to be followed by large shocks, and small shocks of either sign tend to follow small shocks. The estimated export volume news impact curve for the GARCH also suggests that $h_t$ is overestimated for large negative and positive shocks. The conditional variance equation of the GARCH model for export volumes contains two parameters ${\alpha}$ and ${\beta}$ that are insignificant, indicating that the GARCH model is a poor characterization of the conditional variance of export volumes. The conditional variance equation of the EGARCH model for export value, however, shows a positive sign of parameter ${\delta}$, which is contrary to our expectation, while the GJR model exhibits that parameters ${\alpha}$ and ${\beta}$ are insignificant, and ${\delta}$ is marginally significant. That indicates that the asymmetric volatility models are poor characterization of the conditional variance of export value. It is concluded that the asymmetric EGARCH and GJR model are appropriate in explaining the volatility of export volume, while the symmetric standard GARCH model is good for capturing the volatility.