• 대한소아치과학회지
• /
• 제5권1호
• /
• pp.33-38
• /
• 1978

It has been studied that aminoacetonitrile was associated with the inhibition of collagen fiber, argyrophilic fiber and oxytalan fiber synthesis. This experiment was performed, by the basic knowledge of above mentioned study, to study on the biological effect of aminoacetonitrile to the developing periodontal ligament in Sprague Dawley rat. twenty two of female rats weighing about 200gm were gestated. In 7 days after gestation, the experimental rats were injected aminoacetonitrile 7 times intraperitoneally. After parturition, delivered fJtuses were divided into 4 groups and each group was sacrificed to 1 day, 7 days, 14 days, and 21 days after delivery, schematically. All the fetuses were observed on their periodontal ligament by histological and histo chemical methods. To study on the components of periodontal ligament fiber in these experimental study van Gieson, Masson's trichrom, argyrophilic fiber, oxytalan fiber, methyl green pyronin and periodic acid-Shiff staining were performed. Results were as follows; 1) Retardation of functional orientation in periodontal ligament collagen fiber was observed in 1 day fetuses hut this appearance was diminished gradually and recovered in normal condition in 7 days fetuses. 2) Distribution of argyrophilic fiber in 1 day fetuses was oriented delicately and loosely but volume of this fiber was gradually thickened and distributed densely. 3) Oxytalan fiber was oriented dendritic ally and contradictorily in 14 days fetuses but their orientation was changed into oblique form in middle portion of roof and their numbers were increased gradually. 4) Pyronin-philic stain of fibroblast was gradually deepened in 7 days fetuses and this finding also suggested to the depreciation of collagen synthesis in this specimen. 5) PAS positive line was observed continuousely at the portion of cervical to the middle root surface.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.145-155
• /
• 2002

In order to investigate how upper limb motion gives influence on clothing, this study measured tests by following standards: Front Vertical motion, Side-Vertical motion, and Horizontal motion. For this study, the procedures in the order of alphabet are applied. A. Eeach of testee's pattern was copied by the motion with a method of tight fitting technique. B. Analyzing each of the size-change on measuring item. C. Studying the moving aspects at each datum points. The results shows that the biggest change can be found in the following items. 1) In vertical motion of F4 (the length to shoulder point from A-point) 2) In horizontal motion of F5 (the length to front-width point from A-point), the check-result gained by checking the notice between motions shows that the most noticeable items are F4 (the length to shoulder point from A-point), F5 (the length to front-width point from A-point), F6 (the length to armpit point from A-point), B7 (the length to side-waist point from B-point). In result of the study of datum point's movement by motion, the items which were measured with the longest on straight-distance in vertical motion are the front and rear-shoulder, and the rear-shoulder, front-armpit in horizontal motion each. In the movement of each datum points by length, the check-result gained by checking the notice between motions shows that the most remarkable item is the front-shoulder.

• 한국어류학회지
• /
• 제7권2호
• /
• pp.114-119
• /
• 1995

1994년(年) 7월(月) 6일(日) 제주도(濟州道) 한림(翰林)에서 채집(採集)된 양태과(科)의 점양태속(屬) 어류(魚類) 1개체를 조사(調査)한 결과(結果) 지금까지 우리나라에서는 보고(報告)된 적이 없는 Inegocia guttata (Cuvier)로 동정(同定)되었다. 본 종(種)은 형태적(形態的)으로 Cymbacephalus beauforti와 흡사(恰似)하나 측선(側線) 유공린수(有孔鱗數)는 측선린(側線鱗) 위쪽에 비스듬이 배열(配列)되어 있는 후하방(後下方) 종열린수(縱列鱗數)보다 매우 적으며 두부(頭部)에는 비극(鼻棘)이 있고 눈 위에 피판(皮瓣)이 없으며 간새개부의 피판(皮瓣)은 단일형(單一形)이고 가슴지느러미와 배지느러미에는 도형(圖形)의 검은 반점(斑點)이 존재(存在)하는 것 등의 특징(特徵)이 Cymbacephalus beauforti와 잘 구별(區別)되었다. 본(本) 종(種)의 한국명(韓國名)으로는 "악어양태" 라고 잠정적으로 명명(命名)하였다.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.173-181
• /
• 2013

This research analyzed the expression trend about the slit which composes the open space by the visual concept and then introduced the imbedded aesthetic value in it. Based on it, this work aims at showing the evidence on the slit as a utilizing tool for various design applications and providing the basic materials in order to develop the creative design production in the fashion area in the future. Specifically, for the theoretical background in this research, the concept of slit and its chronological changes were reviewed through literature. For the empirical analysis on the slit, a total of 226 designs with its application were analyzed from collection pieces in the four major collections including Paris, Milan, New York, and London from 2006S/S to 2012S/S. As a result of analysis, types of slit appeared as a slash, opening, slit, or a mix of them. These were applied to many different items of clothing, and among which, one-piece or dress was adopted most for application. In regard to space form, perpendicularity was used most frequently. But other various forms like cross and geometrical pattern were also used as well as curve, oblique line and horizontality. As to the arrangement of slit, single type was most frequently used. However, in addition to it, other types were also applied, producing both the functionality and the decorative detail such as bilateral symmetry, free irregularity, and a combination of regular and repeated layout which makes an effect of single pattern. Aesthetic values imbedded in slit were revealed as functionality, sensuality, spatiality, and decorativeness.

• Archives of Reconstructive Microsurgery
• /
• 제25권2호
• /
• pp.25-28
• /
• 2016

Purpose: Reconstruction of small defects of the dorsal fingers and toes is a challenging task. Although adipofascial flap is widely used for these areas, additional refinements are warranted. In this paper, we define the appropriate defect size in the finger and toes that can be treated with the adipofascial flap, refine its surgical indications and present a few surgical tips. Materials and Methods: Twelve patients with dorsal defects of the fingers and toes were treated with a random-type adipofascial turn-over flap and skin graft. If the defect area exceeded the size that could be covered by a conventional design, the flap base was designed in oblique or curvilinear fashion to lengthen the flap. For accurate defect coverage, the width of the flap base was designed in an asymmetrical shape depending on the defect configuration, varying the width from 0.3 to 1.0 cm, as opposed to the standard 0.5 to 1.0 cm width. Moreover, the lateral limit of the flap was defined as the lateral axial line. The size of the defect ranged from $3.0{\times}1.7cm$ to $1.5{\times}1.3cm$. Results: All flaps survived completely. Gliding function of the hand was well preserved and there was no evidence of tendon adhesion. Conclusion: The small defect in the dorsal finger and toe can be defined as less than one phalanx-length, measuring about $3.0{\times}2.0cm$ in size. If the defect exceeds this dimension, it is recommended that a different option be considered. We believe the adipofascial flap is an excellent option for treating small defects.

• Journal of Korean Dental Science
• /
• 제3권2호
• /
• pp.4-11
• /
• 2010

Purpose: This study aimed at examining the thickness of lateral cortical bone in the mandibular posterior body and the location of the inferior alveolar nerve canal as well as investigating the clinically viable bone grafting site(s) and proper thickness of the bone grafts. Subjects and Methods: The study enrolled a total of 49 patients who visited the Department of Oral and Maxillofacial Surgery at Kyung Hee University Dental Hospital to have their lower third molar extracted and received cone beam computed tomography (CBCT) examinations. Their CBCT data were used for the study. The thickness of lateral cortical bone and the location of inferior alveolar nerve canal were each measured from the buccal midpoint of the patients' lower first molar to the mandibular ramus area in the occlusal plane of the molar area. Results: Except in the external oblique ridge and alveolar ridge, all measured areas exhibited the greatest cortical bone thickness near the lower second molar area and the smallest cortical bone thickness in the retromolar area. The inferior alveolar nerve canal was found to be located in the innermost site near the lower second molar area compared to other areas. In addition, the greatest thickness of the trabecular bone was found between the inferior alveolar nerve canal and the lateral cortical bone. Conclusions: In actual clinical settings involving bone harvesting in the posterior mandibular body, clinicians are advised to avoid locating the osteotomy line in the retromolar area to help protect the inferior alveolar nerve canal from damage. Harvesting the bone near the lower second molar area is judged to be the proper way of securing cortical bone with the greatest thickness.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.275-285
• /
• 2006

With these excavated clothes discussed above, the clothing style before and after the Chosun-Japan War from 1592 to 1597 can be summarized as follows. 1) Shroud was a clothes newly made for funeral or usually worn by the deceased. Shroud was mostly a unlined clothes whose adjustment was made in such way its left part was on top of its right one. Yeomeui, a clothes used to wrap up the body of the deceased or fill between the body and the coffin, was usually lined or quilted. Suryeeui was a suit sent by close relatives of the deceased or granted by the court. Mostly padded with cotton or quilted, suryeeui was used only for yeomeui. 2) The term of ching was used to count units of po and suits of trousers and jeogori during dressing the deceased for burial. If trousers and jeogori were not joined into a suit, they were not counted as ching. 3) Aekjueumpo, bangryeongsangeui, three-forked trousers and haengjeon for women were all clothes worn around the war. All these clothes were not worn after the war. 4) Several types of po which were discovered in Daejeon included danryeong, simeui, nansam, jikryeong, cheolik, aekjuempo, changeui and jungchimak for men and jangeui for women. Often, jikryeong, cheolrik, aekjueumpo and bangryeongsangeui were used before the war and changeui and jungchimak since then. 5) The git of jeogori had the style of mokpan git before the war, which was changed into that of dangko git through making the rectangular ege of mokpan git rounded in the 17th century. And jeogori became entirely small sized and the baerae line of sleeve became oblique. 6) In funeral rites of Daejon, simeui and nansam both of which were symbols of Confucian scholars, instead of official uniforms, were used as funeral garments. This suggests that funeral rites of Daejeon considerably reflected academic traditions of the Giho school meaning groups of scholars representing the region.

• 한국어류학회지
• /
• 제19권3호
• /
• pp.246-252
• /
• 2007

농어목 바리과에 속하는 Chelidoperca pleurospilus 2개체(체장 56.3~61.1 mm)와 양동미리과에 속하는 Parapercis muronis 21개체(체장 34.0~93.6 mm)가 제주도 주변해역에서 채집되었다. C. pleurospilus는 체측에 5개의 검은 반점이 있고 꼬리지느러미 후단부가 절단형이며, 양눈사이에 비늘이 없는 것이 특징이다. P. muronis는 체측에 5줄의 검은 띠가 비스듬히 있고 등지느러미 극조가 5개이며, 등지느러미의 극조부와 연조부 사이에 결각이 없는 것이 특징이다. 두 종에 대해 각각 "별각시돔"과 "다섯줄양동미리"라고 신한국명을 부여하였다.

• 해양환경안전학회지
• /
• 제23권7호
• /
• pp.948-955
• /
• 2017

현재 해양플랜트용 패널의 주요한 중심재는 다공성재료(미네랄울) 이지만, 뛰어난 차음성능에도 불구하고 환경적인 이유로 이를 대체할 재료가 요구되고 있다. 허니컴 구조는 무게 대비 강도가 우수하여 산업전반에서 많이 쓰이고 있다. 하지만 소음진동 측면에서의 연구는 미미하다. 다공성재료를 대체하기 위한 연구로서 허니컴의 음향학적 연구가 필요하다. 본 논문에서는 허니컴패널을 대칭모드와 비대칭모드의 중첩으로 가정하여 수치해석을 진행하였다. 이러한 이론을 통한 수치해석과 실험결과를 비교하여 수치해석의 신뢰성을 검증하였다. 그리고 수치해석을 통해 허니컴패널의 차음특성을 연구하고 중심재로서의 가능성을 평가하였다. 패널두께를 키울수록 일치주파수가 저주파수로 이동하였다. 셀사이즈와 셀벽의 사이각이 감소함에 따라 차음성능이 개선되었고, 셀벽두께의 경우 증가할수록 차음성능이 향상되었다.

• 한국정보통신학회논문지
• /
• 제24권10호
• /
• pp.1280-1287
• /
• 2020

본 논문에서는 주문형 케이크의 자동화 제작을 위해 필요한 일련의 영상 기반 식품 모양 인식 및 정밀 측위 방법을 제안한다. 초소형 카메라 모듈을 푸드 아트 프린터 내부의 비스듬한 위치에 장착 후 원근 변환을 적용하여 탑 뷰(top veiw) 이미지로 전환 후 에지 검출, 직선 및 원형 허프 변환 등을 수행하도록 하여 식품의 모양을 인식하고 무게 중심 좌표를 검출하도록 하였다. 본 알고리즘을 케이크 및 떡 모형에 적용하여 테스트를 수행하였으며 그 결과 180~250 lux 범위의 조명 환경에서 98.75% 의 높은 객체 인식률을 얻을 수 있었으며 50~120 lux 범위에서 0.87% 이내의 중심점 측위 오차율을 얻을 수 있었다. 이는 수요처의 요구 사항을 충분히 만족하는 수치이며 실시간 처리 성능도 프레임당 0.5초 이내로 나타나 상용화 가능성을 충분히 갖춘 것으로 판단된다.