• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.2
• /
• pp.25-31
• /
• 2016

PURPOSE: The purpose of this study was to compare the trunk muscle activity according to the direction of upper extremity lifting using elastic band. METHODS: Thirty three healthy individuals participated in this study. Each subject performed upper extremity lifting using elastic band on two different directions (straight and diagonal). And then we compared the muscle activity of respective trunk muscles of both directions. In order to examine the muscle activity of trunk muscle, we used the electromyogram to measure peak and mean torque in shoulder 90 degree flexion with sitting position. Electromyographic activities were recorded from the external oblique, internal oblique, rectus abdominis, and erector spine muscles during upper extremity lifting. RESULTS: As a result, first, there was significant difference between two directions. The muscle activity of ipsilateral external oblique and contralateral internal oblique is significantly increased in both straight and diagonal directions (p<0.05). Second, the muscle activities of external oblique and internal oblique of both side showed significant difference in diagonal direction (p<0.05). Third, the muscle activity of erector spine of both side showed significant difference in straight direction (p<0.05). CONCLUSION: Through this study, it is important that implement diagonal direction exercise at sitting positions to help increasing muscle activity of ipsilateral external oblique and contralateral internal oblique on patients when activating the trunk muscle or stabilizing the trunk.

• PNF and Movement
• /
• v.18 no.1
• /
• pp.35-44
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of the simultaneous abdominal drawing-in maneuver (ADIM) on the muscle activity of the ipsilateral trunk and leg during proprioceptive neuromuscular facilitation (PNF) leg flexion, adduction, and external rotation with knee flexion (D1) patterns. Methods: The participants were 20 healthy adult males and females (18 males and 2 females). The maneuvers were performed by a physical therapist who fully understands the PNF leg patterns (D1) and their application in clinical practice. The participants were trained and allowed to practice for 15 minutes prior to applying ADIM, to ensure adequate learning as evidenced by the pressure biofeedback unit. In this study, we measured the muscle activity of the trunk and leg when the PNF leg pattern (D1) was performed by the physical therapist either sustaining or releasing the ADIM. Muscle activity was measured on the right transverse abdominis muscle (TRA), the external abdominal oblique muscle (EO), the internal abdominal oblique muscle (IO), the erector spinae muscle (ES), the vastus medialis oblique muscle (VMO), the vastus lateralis oblique muscle (VLO), and the tibialis anterior muscle (TA) and compared using the mean values from averaging three repeated measurements. Results: The muscle activity of the transversus abdominis, the external abdominal oblique, the internal abdominal oblique, the vastus medialis oblique, and the vastus lateralis oblique was significantly greater (p < 0.05), and the muscle activity of the erector spinae was significantly less (p < 0.05) during PNF leg pattern (D1) when the ADIM contraction was sustained compared to when it was not. Conclusion: These results suggest that sustaining ADIM during PNF leg pattern (D1) training increases the trunk and leg muscle activity, resulting in more effective training.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.321-329
• /
• 2021

Purpose: The abdominal drawing-in maneuver (ADIM) is an exercise that selectively strengthens deep abdominal muscles. It is reported to be effective in strengthening those muscles when using a pressure biofeedback unit. However, multiple factors of bridge exercise seem to bring exercise result of ADIM without stabilizer as they influence execution of ADIM. Therefore, the purpose of this study was to compare changes in the thickness of deep abdominal muscles through the ADIM exercise incorporating either a stabilizer or the bridge exercise. Methods: Thirty healthy adults who had voluntarily given their consent were selected as the subjects. A diagnostic sonograph was used to measure the thickness of the subjects' transverse abdominis, internal oblique, and external oblique muscles. First, the thickness of the subjects' deep abdominal muscle was measured while maintaining the ADIM using the stabilizer. After three minutes of rest, the thickness was measured again while the subjects maintained the ADIM with the bridge exercise. Results: In both exercises, the thickness of the transverse abdominis showed a statistically significant increase, with a more significant increase while executing the ADIM using the bridge exercise. In both exercises, the thickness of the internal oblique showed a statistically significant increase, with a more significant increase while executing the ADIM using the bridge exercise. The thickness of the external oblique showed a statistically significant increase only in the ADIM using the bridge exercise. Conclusion: Though strengthening is not as selective as the ADIM using a stabilizer, the ADIM using the bridge exercise has a more increased thickness of the transverse abdominis and the internal oblique than that of the internal oblique. Based on the outcome of this study, the ADIM using the bridge exercise without a stabilizer can selectively strengthen deep abdominal muscles even more.

• The Korean journal of sports medicine
• /
• v.36 no.4
• /
• pp.197-206
• /
• 2018

Purpose: This study analyzed the muscle activity changes induced by motions of reaching forward and chest expansion that were examined from the bilateral muscles with rectus abdominis, external oblique, multifidus, and longissimus thoracic using Pilates cadillac instrument. Methods: Nine young adult women, who have no musculoskeletal disorder and any of chronic diseases, were participated. Surface electromyography system was used for recording of all signals produced by muscles, and then normalized as percentage of maximum voluntary isometric contraction (%MVIC). The paired t-test and repeated measures of analysis of variance was performed. Results: Reaching-forward motion showed a higher muscle activity from non-dominant external oblique muscle than that of the chest-expansion motion. During both reaching-forward motion and chest-expansion motion, MVIC values collected from dominant side of external oblique muscle were shown a significantly lower than the values obtained from non-dominant side (p<0.05). Conversely, %MVIC values in external oblique muscle collected from dominant side showed a significantly higher than the values obtained from non-dominant side of the same oblique muscle (p<0.05). Reaching-forward motion was caused a higher %MVIC on non-dominant external oblique muscle than that of the chest-expansion motion (p<0.05). Regardless of dominant or non-dominant sides, external oblique muscle was shown the highest activation rate of all the other muscles during reaching forward action, and longissimus thoracic muscle was shown the highest activation rate of all the other muscles during chest expansion action. Conclusion: Reaching-forward motion is suitable for activating an external oblique muscle, and chest-expansion motion is an effective enough in activating of longissimus thoracic muscle.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.1197-1208
• /
• 2014

The problem of the oblique water entry of a three dimensional body is considered. Wagner theory is the theoretical framework. Applications are discussed for an elliptic paraboloid entering an initially flat free surface. A dedicated experimental campaign yields a data base for comparisons. In the present analysis, pressure, force and dynamics of the wetted surface expansion are assessed.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.577-585
• /
• 1995

This study has been performed to determine whether significant differences in the maxillary basal bone pattern exist between skeletal class II malocclusion and normal occlusion. Materials for the skeletal Class III sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 29 adult individuals, 15 males and 14 females. The average age was 19.75 years with a range from 16.4 to 29.1 years. A normal control sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 24 adult individuals, 13 males and 11 females. The average age was 24.25 years with a range from 20.8 to 29.4 years. The results of this study can be summarized and concluded as like follows. 1. In comparing sexual difference of maxillary basal bone morphology in skeletal Class III malocclusion, the following Parameters of males were found to be significally larger than those of females : inter first premolar width, inter molar width, oblique canine height, oblique molar height and maxillary basal bone perimeter. 2. In comparing sexual difference of maxillary basal bone morphology in normal occlusion, the following parameters of males were found to be significally larger than those of females : inter canine width, inter first and second premolar width, inter molar width, oblique canine height and oblique molar height. 3. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion md normal occlusion in males, the following parameters were found to be significally larger in normal occlusion : inter canine width, inter canine height, inter molar height, oblique canine height and oblique molar height. 4. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion and normal occlusion in females, the following parameters were found to be significally larger in normal occlusion : inter canine height, inter molar height, oblique canine height, oblique molar height and maxillary basal bone perimeter.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.37-42
• /
• 1997

Turbulent flow characteristics of a two - dimensional oblique plate impinging jet(OPIJ) were experimentally investigated. The jet mean velocity and turbulent intensity profIles were also measured along the plate. The jet Reynolds numbers(Re, based on the nozzle width)ranged from 10, 000 to 35, 000, the nozzle - to - plate distance(H/B) from 2 to 16, and the oblique angle (a) from 60 to 90 degree. It has been found that the stagnation point shifted toward the minor flow region as the oblique angle decreases and the position of the stagnation point nearly coin¬cided with that of the maximum turbulent intensity.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.10-13
• /
• 2004

The PSP(pressure sensitive paint) technique has recently received a large attention as a new revolutionary optical method to measure absolute pressure distribution on a model surface. The PSP technique can be applied to quantitatively investigate flow structure using a CCD camera and image processing technique. In the static calibration, the luminescent intensity of PSP coatings was measured from 0kPa to 11kPa with 0.5, 1, 2kPa increments. In this study, the low-pressure PSP technique was applied to an oblique impinging jet to measure pressure field variations on the impingement plate with varying angle of an oblique jet. The flow structure over the impingement plate was visualized using a surface tracing method. As a result, the detail pressure field distributions of the oblique low-speed impinging jet were visualized effectively using the PSP technique.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.100-105
• /
• 2022

Oblique car to car frontal impact is quite common on the road and series of studies have been done to realize this in the lab. At a certain angle of oblique crash a car (ego) is to travel at a speed of xkm/h to hit the other car(traffic) which is approaching to ego at a speed of ykm/h. Symmetry of the speed of two vehicles, x vs. y, is studied with respect to the impulse of the ego vehicle as well as occupant injury. If there is symmetry of speed of two vehicles, number of case studies needed to analyze the oblique frontal impact may decrease: ex. in the case of 30degree oblique crash 40km/h (ego) / 80km/h (traffic) will show the similar behavior as 80km/h (ego) / 40km/h (traffic) crash.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1789-1794
• /
• 2003

As a new approach to analyze shear behaviors in the shear plane and chip-tool friction behaviors in the chip-tool contact region during an end milling process, this paper introduces a method to transform an end milling process to an equivalent oblique cutting process. In this approach, varying undeformed chip thicknesses and cutting forces in the up-and down-end milling process are replaced with the equivalent ones of oblique cutting. Accordingly, in the current paper, the shear and friction characteristics of end milling operations, up- and down-end milling, have been analyzed based on the equivalent oblique cutting models. Two series of cutting tests, up- and down-end milling tests and the equivalent oblique cutting tests to that, have been carried out to verify the validity of the analyses. And using the results of cutting tests the cutting characteristics of the up- and down-end milling processes have been thoroughly investigated.