Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지

A Study on the Flow Characteristics of a Two - Dimensional Oblique Plate Impinging Jet

경사진 평판에서 2차원 충돌 제트의 유동 특성에 관한 연구

  • 윤순현 (부산대학교 기계설계공학과 기계기술연구소) ;
  • 김경문 (부산대학교 대학원 기계설계공학과) ;
  • 김대성 (부산대학교 기계기술연구소)
  • Published : 1997.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Turbulent flow characteristics of a two - dimensional oblique plate impinging jet(OPIJ) were experimentally investigated. The jet mean velocity and turbulent intensity profIles were also measured along the plate. The jet Reynolds numbers(Re, based on the nozzle width)ranged from 10, 000 to 35, 000, the nozzle - to - plate distance(H/B) from 2 to 16, and the oblique angle (a) from 60 to 90 degree. It has been found that the stagnation point shifted toward the minor flow region as the oblique angle decreases and the position of the stagnation point nearly coin¬cided with that of the maximum turbulent intensity.

Keywords

References

  1. Stanford Univ. Tech. no.3 The Flow Development and Heat Transfer Characterisitcs of Plane Turbulent Impinging Jets Schauer, J. J.;Eustis, R H.
  2. J. of Hydraulisc Div. ASCE v.100 Impinging Circular Turbulent Jets Beltaos, S.;Rajaratnam, N.
  3. J. of Fluid Mech. v.73 The Planar Turbulent Jet Gutmark, E.;Wyananske, J.
  4. J. of Fluid Mech. v.88 The Plane Turbulent Impinging Jet Gutmark, E.;Wolfshtein, M.;Wygnanski, I.
  5. Bulletin of the JSME v.26 no.221 Turbulent Effect on the Impinging Jet on a Flat Plate Amano, R. S.
  6. Trans. of ASME, J. of Basic Eng. v.92 Some Solutions of the Plane Turbulent Impinging Jet Wolfshtein, M.
  7. ASME, J. of Heat Transfer v.88 Heat Transfer Characteristics of impinging Two Dimesional Air Jets Gardon, R.;Akfirat, J. C.
  8. ASME J. of Heat Transfer v.111 Heat Transfer Measurements From a Surface With uniform Heat Flux and a Fully Developed Impinging Jet Baughn, J. W.;Shimizu, S. S.
  9. ASME J. of Heat Transfer v.110 Heat Transfer From a Flat Surface to an Oblique Impinging Jet Goldstein, R. J.;Frachett, M. E.
  10. ASME J. of Heat Transfer v.102 Heat Transfer Characteristics of an Obliquely Impinging Wall Jet Sparrow, E.;Lovell, B. J.
  11. J. Heat and Fluid Flow v.13 A Review of Heat Transfer Data for Single Circular Jet Impingement Jambunthan, K.;Lai, E.;Moss, M. A.;Button, B. L.
  12. Trans. ASME, J. Appl. Mech. Investigation of a Turbulent Radial Wall Jet Poreh, M.;Tsuei, Y. G.;Cermak, J. E.
  13. AIAA Journal v.17 no.8 Measurements in a Large Angle Oblique Jet Impingment Flow Foss, J. F.