• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.361-370
• /
• 2009

The image quality management of bone mineral density is the responsibility and duty of radiologists who carry out examinations. However, inaccurate conclusions due to lack of understanding and ignorance regarding the methodology of image quality management can be a fatal error to the patient. Therefore, objective of this paper is to understand proper image quality management and enumerate methods for examiners and patients, thereby ensuring the reliability of bone mineral density exams. The accuracy and precision of bone mineral density measurements must be at the highest level so that actual biological changes can be detected with even slight changes in bone mineral density. Accuracy and precision should be continuously preserved for image quality of machines. Those factors will contribute to ensure the reliability in bone mineral density exams. Proper equipment management or control methods are set with correcting equipment each morning and after image quality management, a phantom, recommended from the manufacturer, is used for ten to twenty-five measurements in search of a mean value with a permissible range of ${\pm}1.5%$ set as standard. There needs to be daily measurement inspections on the phantom or at least inspections three times a week in order to confirm the existence or nonexistence of changes in values in actual bone mineral density. in addition, bone mineral density measurements were evaluated and recorded following the rules of Shewhart control chart. This type of management has to be conducted for the installation and movement of equipment. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. Bone mineral density inspection was applied as the measurement method for patients either taking two measurements thirty times or three measurements fifteen times. An important point when taking measurements was after a measurement whether it was the second or third examination, it was required to descend from the table and then reascend. With a 95% confidence level, the precision error produced from the measurement bone mineral figures came to 2.77 times the minimum of the biological bone mineral density change. The value produced can be stated as the least significant change (LSC) and in the case the value is greater, it can be stated as a section of genuine biological change. From the initial inspection to equipment moving and shifter, management must be carried out and continued in order to achieve the effects. The enforcement of proper quality control of radiologists performing bone mineral density inspections which brings about the durability extensions of equipment and accurate results of calculations will help the assurance of reliable inspections.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.4
• /
• pp.251-258
• /
• 2004

Soil testing for silicon (Si) in the upland soils has not been sufficiently investigated. The objective of this study was to identify a suitable Si extraction method for upland soils of oriental melon (Cucumis melo L.). Thirty-eight surface soil samples and matured leaf samples were collected from plastic film houses in Sungju, Gyeongbuk province. In the laboratory, six different methods were used for extracting Si from the soils. The methods included 0.5 N HCl extraction, 1 N sodium acetate buffer (PH 4.0) extraction, citric acid 1% extraction, water extraction, Tiis buffer pH 7.0 extraction, and extraction after incubation with water for 1 week. The concentration of dissolved Si in soil extracts from all methods was determined colorimetrically. With 1 N sodium acetate buffer extraction, as the available soil Si increased, the concentration ofSi in oriental melon leaf increased until around $14g\;SiO_2\;kg^{-1}$ was reached in the form of a saturation curve. Also, among the methods studied, extraction with 1 N sodium acetate buffer was the only method provided a significant linear correlation with oriental melon leaf Si content in the range of extractable soil Si lower than the level which inducing Si saturation in oriental melon leaf. These results indicate that 1 N sodium acetate buffer extraction procedure is the best soil Si test method for upland soils of oriental melon. This sodium acetate buffer extraction procedure is rapid and quite well acquainted with scientists and farmers, since the method has been used for routine paddy soil testing.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.91-98
• /
• 2009

The objective of this research was to evaluate the chemico-physical and sensory traits of Hanwoo beef quality grade $1^{++}$ ($HW1^{++}$), grade $1^+$ ($HW1^+$), grade 1 (HW1), and Australian Wagyu (AUW) beef. The Longissimus Lumborum (LL) of $HW1^{++}$ beef had the lowest (p<0.05) moisture contents (54.07%) while it had the highest (p<0.05) CIE L, a, b value and water holding capacity (WHC). Fat contents of LL were significantly different (p<0.05) among the beef groups: $HW1^{++}$ (25.58%), $HW1^+$ (16.39%), HW1 (11.29%), and AUW (11.87%) beef. Warner-Bratzler shear force (WBSF) values were the lowest in the beef from AUW (2.81 kg) beef. Cooking loss of AUW beef had the highest value (23.77%) among the beef groups. Quality grade affected sensory traits, with $HW1^{++}$ receiving highest (p<0.05) tenderness, juiciness and flavor. In Hanwoo beef, from grade 1 to $grade1^{++}$, there were significant increases in fat content (from 11.29% to 25.58%), CIE L value (37.56 to 43.15), WHC (55.97% to 60.05%), tenderness (4.63 to 5.28), and decreases in moisture contents (66.84% to 54.07%), protein contents (20.35 to 19.76%), and WBSF value (5.43 kg to 2.93 kg) value. In sensory evaluation, overall acceptability score for Hanwoo $1^{++}$ grade beef was significantly higher than for Australian Wagyu beef. However, there were no significant differences in sensory properties between Hanwoo 1, $1^+$ grade and Australian Wagyu beef.

• Journal of agricultural medicine and community health
• /
• v.37 no.3
• /
• pp.167-180
• /
• 2012

Objective: This study was conducted to evaluate an education program for cardiocerebrovascular high-risk patients. Methods: This program was developed according to Tyler's model for curriculum development. To evaluate the effects of this program, we measured clinical outcome change (weight, waist circumference, systolic blood pressure, diastolic blood pressure) and behavior change stages (checking blood pressure, blood sugar levels, doing physical activity, consistent maintenance of food intake, eating low amounts of salt, abstention from tobacco and alcohol) before and 4 weeks after participation in the education program. The group of subjects consisted of High-risk group patients who attended basic program(32 patients), and staged program(37 patients) during KHyDDI meetings from Oct. 2009 to May 2010. Results: The staged educational program was developed three aspects(disease, nutrition and exercise)and three stages(basic, in-depth and individual education). In the staged education program, the evaluations were made by measuring clinical outcome and stage of behavior before and after education. Significant differences were found in waist circumference, systolic blood pressure, diastolic blood pressure, consistent maintenance of food intake(p<0.05), and eating low salt(p<0.001)and their self efficacy. Conclusion: In the practice-oriented staged education program, significant differences were found in the clinical outcomes and stage of behavior before and after education. Possible limitations of the study include the small number of participating subjects and the short follow-up management period, but the results indicate that continued application of this program could contribute to the prevention of cardiocerebrovascular diseases for the elderly patients with long periods of chronic diseases.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.4
• /
• pp.109-138
• /
• 2010

This study examined how practical reasoning process is reflected in the 2007 revised home economics textbook of the 7th grade that is being used in schools since 2010. For a textbook analysis of the components of practical reasoning process, 12 published textbooks were all analyzed, and analysis areas were decided by reconstructing the textbook system into introduction, body contents, learning activities, evaluation. Analysis criteria were extracted from the previous literatures. Practical reasoning process was classified into Valued Ends, Context and Background, Alternatives and Means, on sequence, and Action and Reflection. As a result of analyzing categories and problems that practical reasoning process is reflected in the textbook, firstly, here was a category, which Valued Ends was absent in the practical reasoning process. In the relevant category, general problem solving progress and practical reasoning process could not be differentiated, and activity was developed with 'strategies for solution' as objective. Second, there was a category that the practical reasoning process was reflected in body contents. In this category, knowledge, concept, principle, and theory were insufficiently dealt with. Third, there was a category that reflected components of practical reasoning process but was covered with general problem solving process. Fourth, there was a category that described theme of sub-unit and body contents from the different curriculum perspectives. A curriculum perspective works as the foundation of preparing class contents or consistency of methods when developing lessons. Therefore, confusion might occur when a teacher plans a class with this kind of textbook. Fifth, a category that suggested partial components of practical reasoning process was shown the most and this category is difficult to maximize effects of practical reasoning process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.158-165
• /
• 2010

Purpose: The objective of the present study was to histologically evaluate durability and bone regeneration capacity of new synthetic membranes in comparison to clinically available collagen membrane. Material and methods: To the skulls of 12 rabbits, we created 4 bone defects of 6 mm in diameter on each of them. Each of defects were covered with at least one of 5 membranes; No membrane, Collagen ($Ossix^{TM}$), PLGA, HA-coated-PLGA and HA-PLGA/PLGA. After 4, 8, 12 weeks, we cut the skulls and dyed with H-E. And then, the histologic observation was done. Results: In current study, the control group which did not use the membrane showed bone regeneration at 12 weeks and covered the bone defect partially. New bones were formed through the underneath of endocranium, and the upper defect was filled with connective tissues and fats. Collagen membrane ($Ossix^{TM}$) showed new bones after 4 weeks, and they were formed through the membrane which maintained until 12 weeks. PLGA, HA-coated-PLGA, HA-PLGA/PLGA showed bone regeneration after 4 weeks and after 8 weeks, they mostly filled defects. At 12 weeks, we could find new bones and previous bones almost look alike and also, they united well. Membranes were unnoticeable after 4 weeks and were absorbed. Conclusion: Bone formation and maturation of PLGA, HA-coated-PLGA and HA-PLGA/PLGA were faster than the control group. They showed no difference on the application of HA and after 4 weeks, they were absorbed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.122-127
• /
• 2010

Purpose: The objective of this study was to investigate the effects of calcium phosphate coated titanium implant surface on bone response and implant stability at early stage of healing period of 3 weeks and later healing period of 6 weeks. Material and methods: A total of 24 machined, screw-shaped implants (Dentium Co., Ltd., Seoul, Korea) which dimensions were 3.3 mm in diameter and 5.0 mm in length, were used in this research. All implants (n = 24), made of commercially pure (grade IV) titanium, were divided into 2 groups. Twelve implants (n = 12) were machined without any surface modification (control). The test implants (n = 12) were anodized and coated with thin film (150nm) of calcium phosphate by electron-beam deposition. The implants were placed on the proximal surface of the rabbit tibiae. The bone to implant contact (BIC) ratios was evaluated after 3 and 6 weeks of implant insertion. Results: The BIC percentage of calcium phosphate coated implants ($70.8{\pm}18.9%$) was significantly higher than that of machined implants ($44.1{\pm}16.5%$) 3 weeks after implant insertion (P = 0.0264). However, there was no significant difference between the groups after 6 weeks of healing (P > .05). Conclusion: The histomorphometric evaluation of implant surface revealed that; 1. After 3 weeks early healing period, bone to implant contact (BIC) percentage of calcium phosphate coated implants (70.8%) was much greater than that of surface untreated machined implants (44.1%) with P = 0.0264. 2. After 6 weeks healing period, however, BIC percentage of calcium phosphate coated implants group (79.0%) was similar to the machined only implant group (78.6%). There was no statistical difference between two groups (P = 0.8074). 3. We found the significant deference between the control group and experimental group during the early healing period of 3 weeks. But no statistical difference was found between two groups during the later of 6 weeks.

• The Journal of Korean Academy of Sensory Integration
• /
• v.7 no.1
• /
• pp.37-46
• /
• 2009

Background : Theory of Sensory Integration (SI) was initially developed with an effort to understand children's behavior by Jean Ayres and has been evolved with extensive research by occupational therapist practitioners and researchers since in the latter of the 20 century. With extension of recognition to SI, various professions begin to refer their clients who are children with sensory integration dysfunction. Upon those referrals, occupational therapists normally use Short Sensory Profile (SSP) to screen and decide whether SI therapeutic intervention is needed or not. Objective : Purpose of this study is (1) to examine any difference between different age groups and genders for children who are seven to nine years old; (2) to compare the score results of those Korean children with the original Standard which is established for American children: and (3) to compare tendency of response for each item between children with- and without SI dysfunction. This study was intended to validate test items of the SSP and determine whether the original standard of SSP is applicable for Korean children. Method : 155 students (81 for male, 74 for female) underwent SI evaluation using the Korean-translated SSP. 52 student (22 for male, 30 for female) were 7 years old, 54 students (32 for male, 22 for female) were 8 years old, 49 students (27for male, 22 for female) were 9 years old. Results : There is no significant difference of SSP score by neither age nor gender. In comparison the average score and sensory integrative disorder with the American Standard, there is significant difference on score of sub-item and total score. For six items, there is no significant difference on the tendency of response between children with- and without SI dysfunction. Conclusions : It is concluded that the original standard is suitable for Korean children aged seven to nine. The six test items that children without SI dysfunction shown similar tendency to respond are questionable to be appropriate as screening test item. It is suggested to proceed to do further item analysis study and extend the study to broad age groups, so develop the most appropriate Standard of SSP for Korean children.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.421-426
• /
• 2015

The objective of this paper is to look into the growth of Cryptomeria japonica stand in South Korea along with the evaluation on their yields, followed by their carbon stocks and removals. A total of 106 sample plots were selected from Jeonnam, Gyeongnam, and Jeju, where the groups of standard are grown. We only used 92 plots data except outlier. As part of the analysis, the Weibull diameter distribution was applied. In order to estimate the diameter distribution, the growth estimation equation for each of the growth factors including the height, the diameter at breast height, and the basal area was drafted out and the verification for each equation was examined. The site index for figuring out the forest productivity of Cryptomeria japonica stand for each district was also developed as a Schumacher model and 30yr was used as a reference age for the estimation of the site index. It was found that the site index for Cryptomeria japonica stand in South Korea ranges from 10 to 16 and this result was used as a standard for developing the stand yield table. According to the site 14 in the stand yield table, the mean annual increment (MAI) of the Cryptomeria japonica reaches $7.6m^3/ha$ on its 25yr and its growing stock is estimated to be at $190.1m^3/ha$. This volume is about $20m^3$ as high as that of the Chamaesyparis obtusa. Furthermore, the annual carbon absorptions for a Cryptomeria japonica stand reached the peak at 25yr, which is 2.14 tC/ha/yr, $7.83tCO_2/ha/yr$. When compared to the other conifers, this rate is slightly higher than that of a Chamaecyparis obtusa ($7.5tCO_2/ha/yr$) but lower than that of the Pinus koraiensis ($10.4tCO_2/ha/yr$) and Larix kaempferi ($11.2tCO_2/ha/yr$). With such research result as a base, it is necessary to come up with the ways to enhance the utilization of Cryptomeria japonica as timbers, besides making use of their growth data.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1106-1113
• /
• 2017

The objective of this study was to determine the quality characteristics of fried yakgwa and baked yakgwa prepared with different amounts of P. frutescens powder. Moisture contents of fried yakgwa were 7.05%, and moisture content of baked yakgwa with different amounts of P. frutescens powder were 12.42~10.44% and decreased with higher amount of P. frutescens powder. This result can be attributed to loss of water in yakgwa in the course of the fried process. Although the degree of expansion of baked yakgwa was lower than that of fried yakgwa, size and shape of yakgwa were maintained. Yakgwa is appropriate as a cookie type product. Crude lipid contents of fried yakgwa were higher than those of baked yakgwa due to the exchange reaction of water and fat during the fried process. Energy of fried yakgwa was 501 kcal and was higher than that of baked yakgwa with different amounts of P. frutescens powder. This greatly affected the fat content of each sample. Energy of baked yakgwa increased with higher amount of P. frutescens powder due to the characteristics of the ingredients or jasoyeop. For chromaticity determination, L values of fried yakgwa were lower, but a, and b values were higher than those of baked yakgwa, and L, a, and b values decreased when P. frutescens powder increased. Texture measurement showed that hardness, cohesiveness, chewiness, gumminess increased with higher amounts of P. frutescens powder, whereas springiness decreased. The antioxidant activities of fried yakgwa measured based on DPPH scavenging activity were higher than those of baked yakgwa with 0%~0.2% P. frutescens powder and lower than those of baked yakgwa with 0.3%~0.4% P. frutescens powder. In the sensory evaluation, baked yakgwa with 0.1% addition of P. frutescens powder showed the highest preference in terms of overall acceptance, and 0% addition of P. frutescens powder showed the highest preference in terms of color and flavor. These results suggest that P. frutescens powder may be a useful ingredient in baked yakgwa to improve quality and sensory properties.