• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1769-1774
• /
• 2006

A fully integrated inline OLED production system is presented. The performance of PLED devices that are encapsulated with a thin film multilayer stack are compared to conventionally encapsulated devices with glas/dessicant protection. The observed luminance decay is the same in both cases. The lifetime performance of the thin film encapsulation is measured and critical parameters are discussed. The first smOLED devices produced on the OTB equipment are presented and comparison with other smOLED devices shows very good results.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.449-461
• /
• 2021

Analysis Ready Data (ARD) for optical satellite images represents a pre-processed product by applying spectral characteristics and viewing parameters for each sensor. The atmospheric correction is one of the fundamental and complicated topics, which helps to produce Top-of-Atmosphere (TOA) and Top-of-Canopy (TOC) reflectance from multi-spectral image sets. Most remote sensing software provides algorithms or processing schemes dedicated to those corrections of the Landsat-8 OLI sensors. Furthermore, Google Earth Engine (GEE), provides direct access to Landsat reflectance products, USGS-based ARD (USGS-ARD), on the cloud environment. We implemented the Orfeo ToolBox (OTB) atmospheric correction extension, an open-source remote sensing software for manipulating and analyzing high-resolution satellite images. This is the first tool because OTB has not provided calibration modules for any Landsat sensors. Using this extension software, we conducted the absolute atmospheric correction on the Landsat-8 OLI images of Railroad Valley, United States (RVUS) to validate their reflectance products using reflectance data sets of RVUS in the RadCalNet portal. The results showed that the reflectance products using the OTB extension for Landsat revealed a difference by less than 5% compared to RadCalNet RVUS data. In addition, we performed a comparative analysis with reflectance products obtained from other open-source tools such as a QGIS semi-automatic classification plugin and SAGA, besides USGS-ARD products. The reflectance products by the OTB extension showed a high consistency to those of USGS-ARD within the acceptable level in the measurement data range of the RadCalNet RVUS, compared to those of the other two open-source tools. In this study, the verification of the atmospheric calibration processor in OTB extension was carried out, and it proved the application possibility for other satellite sensors in the Compact Advanced Satellite (CAS)-500 or new optical satellites.

• Korean journal of applied entomology
• /
• v.34 no.2
• /
• pp.147-153
• /
• 1995

The occurrence of Oriental Tobacco Budworm (OTB), Helicoverpa assulta (Guenee), larvae in early and late planted tobacco fields showed tow or three distinct peaks. The parasitoid, Campoletis chlorideae Uchida, occurred for a short period with one peak following th second peak of OTB in early planted fields. However, in late planted fields, the parasitoid occurred as long as the OTB larvae were abundant. The OTB larval density was higher in late planted fields than in early planted fields. Among four varieties of tobacco, the OBT larval occurrence was relatively high on NC-744 throughout the season. However, more parasitoid cocoons were found in Burleyf-21 and NC-82. The seasonal occurrence of the larval parasitoid, C. chlorideae, assessed by an OTB larval release and recovery method, continued from late June to early September and relatively higher abundance was noticed from early July to late August. In a field cage evaluation of C. chlorideae as a biological control agent of OTB larvae, higher rate of C. chlorideae release (4 females/2$\m^2$) resulted in higher larval parasitism (86.1%) and less leaf damage (8.7%) in tobacco. The leaf damage by OTB larvae was significantly high in the untreatment plot (23.2%) and the lowest damage (1.6%) was recorded in the chemical treatment plot.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.361-371
• /
• 2010

In recent, interests regarding open source software for geo-spatial processing are increasing. Open source remote sensing (OSRS) is regarded as one of the progressing and advanced fields in remote sensing. Nevertheless, analyses or application cases regarding OSRS are not enough for general uses or references. In this study, three kinds of OSRS software in consideration of international popularity, types of functionalities, and development environments are taken into account: OSSIM, Opticks, and ORFEO Toolbox (OTB). First, functional comparison with respect to these is carried out on the level of the preliminary survey. According to this investigation, OTB is chosen as the most applicable OSRS software in this study. Running on OTB, NIX format importing module and database connecting module are implemented for widely general uses and further application. As for an example case, airborne image of NIX format is used to region growing segmentation algorithm in OTB, and then the results are stored and retrieved in PostGIS database to test implemented modules. Conclusively, local customization and algorithm development using OSRS software are necessary to build on-demand applications from the developers' viewpoint.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.693-709
• /
• 2018

In this paper, we propose a compact Convolutional Neural Network (CNN)-based tracker in conjunction with a particle filter architecture, in which the CNN model operates as an accurate candidates estimator, while the particle filter predicts the target motion dynamics, lowering the overall number of calculations and refines the resulting target bounding box. Experiments were conducted on the Online Object Tracking Benchmark (OTB) [34] dataset and comparison analysis in respect to other state-of-art has been performed based on accuracy and precision, indicating that the proposed algorithm outperforms all state-of-the-art trackers included in the OTB dataset, specifically, TLD [16], MIL [1], SCM [36] and ASLA [15]. Also, a comprehensive speed performance analysis showed average frames per second (FPS) among the top-10 trackers from the OTB dataset [34].

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.253-261
• /
• 1991

Polyamic acids, precursor polymers of polyimides have been obtained by the solution polycondensation of benzophenone tetracarboxylic dianhydride (BTDA) with 4, 4'-diamino diphenyl methane (MDA) and/or 3, 3'-dimethyl benzidine (OTB). The reaction was carried in two solvent systems such as m-cresol and m-cresol/xylene mixture. The results of TGA analysis showed that the polyimide films had good thermal stability with the initial decomposition temperature ranging from $540^{\circ}$ to $590^{\circ}$. According to DSC analysis of polymers, the glass transition temperature was over $340^{\circ}$. Polyimide film samples, showed good mechanical and electrical properties, had over $16Kg/mm^2$ of tensile strength and about 200 KV/mm of dielectric breakdown voltage. The properties of the copolymer from MAD/OTB were better than those of the homopolymer from MDA. And the polymer synthesized in m-cresol had lower properties than that obtained in m-cresol/xylene.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_1
• /
• pp.485-496
• /
• 2022

This study is for the software implementation to generate atmospheric and surface reflectance products from RapidEye satellite imagery. The software is an extension based on Orfeo Toolbox (OTB) and an open-source remote sensing software including calibration modules which use an absolute atmospheric correction algorithm. In order to verify the performance of the program, the accuracy of the product was validated by a test image on the Radiometric Calibration Network (RadCalNet) site. In addition, the accuracy of the surface reflectance product generated from the KOMPSAT-3A image, the surface reflectance of Landsat Analysis Ready Data (ARD) of the same site, and near acquisition date were compared with RapidEye-based one. At the same time, a comparative study was carried out with the processing results using QUick Atmospheric Correction (QUAC) and Fast Line-of-sight Atmospheric Analysis of Spectral Hypercubes (FLAASH) tool supported by a commercial tool for the same image. Similar to the KOMPSAT-3A-based surface reflectance product, the results obtained from RapidEye Extension showed accuracy of agreement level within 5%, compared with RadCalNet data. They also showed better accuracy in all band images than the results using QUAC or FLAASH tool. As the importance of the Red-Edge band in agriculture, forests, and the environment applications is being emphasized, it is expected that the utilization of the surface reflectance products of RapidEye images produced using this program will also increase.

• Korean Journal of Remote Sensing
• /
• v.38 no.1
• /
• pp.21-32
• /
• 2022

The importance of the classical theme of how the Top-of-Atmosphere (TOA) and Top-of-Canopy (TOC) reflectance of high-resolution satellite images match the actual atmospheric reflectance and surface reflectance has been emphasized. Based on the Radiometric Calibration Network (RadCalNet) BTCN and BSCN data, this study compared the accuracy of TOA and TOC reflectance products of the currently available optical satellites, including KOMPSAT-3, WorldView-2, and Pléiades-1A image sets calculated using the absolute atmospheric correction function of the Orfeo Toolbox (OTB) tool. The comparison experiment used data in 2018 and 2019, and the Landsat-8 image sets from the same period were applied together. The experiment results showed that the product of TOA and TOC reflectance obtained from the three sets of images were highly consistent with RadCalNet data. It implies that any imagery may be applied when high-resolution reflectance products are required for a certain application. Meanwhile, the processed results of the OTB tool and those by the Apparent Reflection method of another tool for WorldView-2 images were nearly identical. However, in some cases, the reflectance products of Landsat-8 images provided by USGS sometimes showed relatively low consistency than those computed by the OTB tool, with the reference of RadCalNet BTCN and BSCN data. Continuous experiments on active vegetation areas in addition to the RadCalNet sites are necessary to obtain generalized results.

• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.737-747
• /
• 2017

This experiment was carried out to determine the optimal concentration of agricultural organic materials using sulfur and oil for the insect pest control in pepper and cherry tomato cultivation. The control value of aphids and Oriental tobacco budworm (OTB) was examined one day after spraying with sulfur preparation (SP) (0.33~0.17%), oil preparations (OP) (2.00~0.33%), SP+OP, OP+ginkgo leaf extracts (GLE), SP+OP+GLE on the "Super Manidaa"pepper. The aphid control in pepper was complete by applications of SP+OP (0.25+1.00%) in the early growth stage and the control value was above 98.1% by the application of OP+GLE (1.00+1.00 %), SP+OP+GLE (0.25+1.0+1%), SP+OP+GLE (0.25+1.0+0.5%) in the middle to late growth stage while showing 0% in the control treatment. The OTB was completely controlled by the 3 times application with the high concentration of SP+OP (0.25+1.00%) in pepper cultivation. This result indicates that the oil and the sulfur preparations should be applied at low concentration before insect pests do not appeared, and then sprayed at the high concentration after they appear at pepper plant. The greenhouse whitefly in 'Minichal' tomatoes was completely controlled by three times application of SP (0.25~0.33), OP (1.0~2.00%). and all the treatment of SP+OP. However, continuous control with intervals of 1~3 days was considered favorable in the tomato plant. By the periodical control with agricultural organic materials using sulfur and oil, the greenhouse whitefly, which is a high-temperature insect pest, several moths of OTB did not occur at all. In conclusion, SP+OP (0.17%+0.33%) treatment was the most economical combination to control the aphid, OTB, and greenhouse whitefly in pepper and tomato cultivation when considering operating cost. In addition, we recommend that SP should not be sprayed on the plant shoots during the day time from July to August because of high temperature.

• Korean Journal of Remote Sensing
• /
• v.33 no.4
• /
• pp.339-350
• /
• 2017

In recent, cloud computing paradigm and open source as a huge trend in the Information Communication Technology (ICT) are widely applied, being closely interrelated to each other in the various applications. The integrated services by both technologies is generally regarded as one of a prospective web-based business models impacting the concerned industries. In spite of progressing those technologies, there are a few application cases in the geo-based application domains. The purpose of this study is to develop a cloud-based service system for satellite image processing based on the pure and full open source. On the OpenStack, cloud computing open source, virtual servers for system management by open source stack and image processing functionalities provided by OTB have been built or constructed. In this stage, practical image processing functions for KOMPSAT within this service system are thresholding segmentation, pan-sharpening with multi-resolution image sets, change detection with paired image sets. This is the first case in which a government-supporting space science institution provides cloud-based services for satellite image processing functionalities based on pure open source stack. It is expected that this implemented system can expand with further image processing algorithms using public and open data sets.