• Journal of Radiation Protection and Research
• /
• v.36 no.2
• /
• pp.52-58
• /
• 2011

OSL dating for three hearths having the sequence of use and discard in No. 29 and 29-1 dwelling sites at Sogol cultural site was carried out. Resulting from the deconvolution of natural CW-OSL decay curve and thermal zeroing test, it was turned out that OSL signal was entirely composed of the heat- and light-sensitive fast component with high photoionization cross-section and all quartz OSL signals were thermally bleached under $300^{\circ}C$ which is the minimum temperature related to heating and cooking in Bronze age. After dose recovery test and plateau test, paleodose of each hearth sample was evaluated by using SAR method, and OSL age was determined from the ratio of paleodose to annual dose rate. For the purpose of the precision improvement of OSL age, Bayesian statistics was applied to each hearth's age and the archaeological sequence information. Finally, it could be concluded to the accurate use period of each hearth from the resultant OSL ages.

• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.10-15
• /
• 2012

Design and performance test results of a newly developed optically stimulated luminescence (OSL) measurement system are presented in this paper. Generally, different types of optical filters are used in OSL reader system to minimize the interference of the stimulation light in the OSL signal. For optically stimulation of $Al_2O_3:C$, we have arrived at an optimal combination of the filters, i.e., GG420 filter for filtering the stimulating light source, and a combined UG11 and BG39 filter at the detecting window (PMT). By using a high luminance blue LED (Luxeon V), sufficient luminous intensity could be obtained for optically stimulation. By using various control boards, the OSL reader device was successfully interfaced with a personal computer. A software was developed to deliver required commands to operate the OSL reader by using the LabView program (National Instruments, Inc.). In order to evaluate the reliability and the reproducibility of newly designed-OSL reader. Performance testing of the OSL reader was carried out for OSL efficiency, OSL decay curve and signal to noise ratio of the standard $Al_2O_3:C$ OSL material. It was found to be comparable with that of commercial Riso reader system.

• Journal of Fashion Business
• /
• v.1 no.2
• /
• pp.55-64
• /
• 1997

This study adapted OSL (Optimum Stimulation Level) to induce the customer's behavior, especially customer's fashion behavior. The purpose of the fashion advertisement was to accelerate the purchasing desire for the clothes by catching the customer's attention. OSL is one of the methods. OSL can satisfy customers' desires using the new stimulation that reveals a customer's individual characters. In general, women are more concern about fashion and sensitive to the clothes of new fashion than men. But nowadays, many of the men are also concern about their appearance and fashion. The differences between men and women in fashion behavior and in each factor, of OSL, especially a relationship between OSL factor and fashion behavior are researched in this study. Such differences analyzed to find the sources that can satisfy their various desires. This study was expected to provide good information to plan advertising strategy in unpredictable market situation. The subjects for this study were 308 male and female university students. Mehrabian and Russell (1974),s ASTS(Arousal Seeking Tendency Scale) was adapted to measure the OSL, and twenty questions regarding fashion leadership and clothing importance released by Kwon, Shin, Lee, are adapted to measure the fashion behavior. An ANOVA was used as statistical analyzing method to find out the difference between men and women in fashion behavior. The relationship between fashion behavior and difference between men and women in OSL factors were measured by MANOVA. Conclusions were as follows; 1. In consciousness degree of fashion leadership and clothing importance in the fashion behavior, women were higher than men. 2. There was a difference between men and women in OSL's each factors in "unusual stimuli" and "sensuality", but there is no significant statistical difference in factors of "change", "risk", "new environment". Therefore women are higher than men in the stimulation level of "unusual stimuli" and" sensuality". 3. Low element of OSL relating to fashion behavior is from "change" and "unusual stimuli". 4. For the relationship between OSL and fashion behavior, fashion leadership and clothing importance were recognized better in the group of higher level of "change" and "unusual stimuli" irrespective of sex. In the case of "change" which is one of OSL factors, High OSL groups were higher than low OSL groups in the consciousness level of the fashion leadership and clothing importance. In men's case, High OSL-Change groups were higher than Low OSL-Change groups in the fashion leadership, but there was no difference between two groups in the consciousness of the clothing importance. In the case of "Unusual Stimuli", High OSL groups were superior to Low OSL groups in the fashion leadership, but there was no significant difference between two groups in the clothing importance. In women's case, High OSL-Change groups were superior to Low OSL-Change groups. In the case of "Unusual Stimuli", High OSL groups were superior to Low OSL groups in the fashion leadership, but there was no difference between two groups in the clothing importance.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.3
• /
• pp.187-195
• /
• 2014

In this paper, we report new OSL ages of the marine terrace sediments at Suryum fault site, using single grains of quartz, and briefly discuss their chronological implications on the timing of terrace formation along the southeastern coast of Korea. Of 1200 grains measured, 93 quartz grains were found to have OSL properties suitable for dating, the equivalent dose ($D_e$) values of which varied significantly, ranging from 50 Gy to 610 Gy with the overdispersion of $30{\pm}4%$. Applied to the Central Age Model (CAM) and Minimum Age Model (MAM), these quartz grains showed the OSL ages of $83{\pm}4ka$ and $60^{+3}{_{-7}}ka$, respectively, both of which are stratigraphically inconsistent with the previously reported OSL ages of lower $2^{nd}$ terrace (MIS 5a; ~80 ka). However, Finite Mixture Model (FMM) revealed that a small fraction of the measured quartz grains ($6{\pm}4%$) were of the ages ($194{\pm}24ka$) corresponding to MIS 7. Conclusively, based on single grain OSL ages, it would be prudent not to exclude the possibility that the marine terrace sediments at Suryum fault site have formed during MIS 7. Further, our single grain OSL ages imply that multiple grain(single aliquot) OSL dating methods are not applicable to the marine sediments at Suryum fault site.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.357-365
• /
• 2010

Optically stimulated luminescence (OSL) of quartz is commonly applied to the age dating of Quaternary sediments. However, one of the issues is that some of the quartz samples are not suitable to OSL dating. Mineralogical analysis of the quartz samples with diverse OSL signals are required to strengthen the reliability and applicability of the OSL dating. We analysed the OSL signal characteristics of sedimentary quartz samples from diverse geological environments and measured their trace element contents using laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Quartz samples could be grouped into ones suitable to OSL dating and ones unsuitable on the basis of their OSL signal characteristics. The average trace element contents ranged from 73 to 260 ppm (Al), and from 61 to 248 ppm (Ti) with minor Li, Mg, Cr, Mn, and Fe contents below 40 ppm. We did not find any significant variation of trace element contents of quartz samples consistent with their OSL signal characteristics. This indicates unknown mineralogical factors causing diverse OSL characteristics which should be confirmed by further analysis of sufficient set of samples.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.69-76
• /
• 2017

Background: Time-resolved optically stimulated luminescence (TR-OSL) is a very useful method for calculating the lifetimes of crystalline quartz and feldspar. Materials and Methods: A compact TR-OSL system was developed, comprising a heater assembly manufactured using Kanthal wire, 2 powerful blue light-emitting diodes (LED, LXHL-PB02) for optical stimulation equipped with VIS liquid light guides, and a photomultiplier tube combined with an optical filter for luminescence detection. A pulse generated from the data acquisition board (NI PCI 6250) was used to initiate on/off signals in LED and TR-OSL measurements. Results and Discussion: The TR-OSL and background signals measured using this TR-OSL system using quartz samples were very similar to those reported in a previous study. Additionally, the lifetimes of the build-up and TR-OSL signals were calculated as $27.4{\pm}2.2{\mu}s$ and $30.3{\pm}0.6{\mu}s$, respectively, in good agreement with the findings of a previous study. Conclusion: It was concluded that the developed TR-OSL system was very reliable for TR-OSL signal measurements and lifetime calculations.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.269-276
• /
• 2016

Gosan-ri site is known as the early Neolithic cultural heritage, in which an archaic plainware, called as the Gosan-ri-type pottery, was excavated regarding as the first pottery manufactured in Korea. In this study, OSL dating was carried out to five soil layer samples collected in stratigraphic cross-section for evaluating the formation and occupation of the Gosan-ri site. Paleodose of each soil sample was calculated using the single aliquot regenerative dose (SAR) method with preheat of $220^{\circ}C$ and finally determined using maximum age model, considering its deposition process. The OSL age was determined from the ratio of paleodose to annual dose rate. From the resultant OSL ages and the related 14C dates, it was concluded that the Gosan-ri site was formed after 9,000 BC and a variety of cultural feature including the Gosan-ri-type pottery were occupied ranging from the early Neolithic to the middle of 4,000 BC. Finally, the Gosan-ri site was discarded in the middle of 4,000 BC and has been arrived at present through natural deposits.

• Journal of Radiation Protection and Research
• /
• v.43 no.4
• /
• pp.160-169
• /
• 2018

Background: This study aims to develop an integrated optical system that can simultaneously or selectively measure the signals obtained from radioluminescence (RL), thermoluminescence (TL), and optically stimulated luminescence (OSL), which are luminescence phenomena of materials stimulated by radioactivity, heat, and light, respectively. The luminescence mechanism of various materials could be investigated using the glow curves of the luminescence materials. Materials and Methods: RL/TL/OSL integrated measuring system was equipped with a X-ray tube (50 kV, $200{\mu}A$) as an ionizing radiation source to irradiate the sample. The sample substrate was used as a heating source and was also designed to optically stimulate the sample material using various light sources, such as high luminous blue light emitting diode (LED) or laser. The system measured the luminescence intensity versus the amount of irradiation/stimulation on the sample for the purpose of measuring RL, TL and OSL sequentially or by selectively combining them. Optical filters were combined to minimize the interference of the stimulation light in the OSL signal. A long-pass filter (420 nm) was used for 470 nm LED, an ultraviolet-pass filter (260-390 nm) was used for detecting the luminescence of the sample by PM tube. Results and Discussion: The reliability of the system was evaluated using the RL/OSL characteristics of $Al_2O_3:C$ and the RL/TL characteristics of LiF:Mg,Cu,Si, which were used as dosimetry materials. The RL/OSL characteristics of $Al_2O_3:C$ showed relatively linear dose-response characteristics. The glow curve of LiF:Mg,Cu,Si also showed typical RL/OSL characteristics. Conclusion: The reliability of the proposed system was verified by sequentially measuring the RL characteristics of radiation as well as the TL and OSL characteristics by concurrent thermal and optical stimulations. In this study, we developed an integrated measurement system that measures the glow curves of RL/TL/OSL using universal USB-DAQs and the control program.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.2
• /
• pp.59-70
• /
• 2021

This study aims to determine the sunlight exposure according to depositional environment to improve the accuracy of optically simulated luminescence (OSL) dating. Sufficient sunlight exposure during transportation of sediment is a basic assumption of the OSL dating, and if the process does not occur enough, the results may be overestimated compared to the actual depositional age. Therefore, the main purpose of this study is to establish a correction method by determining residual or unbleachable dose after sunlight exposure in the actual deposition process, not in the laboratory measurement. Four samples from two sites were collected according to the depositional environment from rivers and coasts, and various OSL signals, including the size of residual dose, degree of dispersion between grains, and OSL signal sensitivity, were measured. As a result, it was confirmed that sediments formed under temporarily high energy environments, such as floods and surges, had relatively high residual dose or large dispersion of residual dose between particles. In further studies, the OSL signal characteristics of river sediments by flow velocity will be identified and the relationship between energy and OSL signal characteristics will be identified in more detail. Moreover, a method of reconstructing the paleo-environment at the time of deposition for existing sediments will be devised. It is expected to provide important information for the frequency of disaster recurrence and prediction of future climate change.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.253-260
• /
• 2001

In a structural inverse problem with a limitation to the number of measuring degrees of freedom, the selection of optimal sensor locations (OSL) is critical for a good result. The current research proposes and a new OSL method and compares it with a widely used OSL method. The proposed method utilizes the sensitivity of eigenvectors with respect to the structural parameters. A simulation study for a tower structure is carried out. The structural parameters are estimated by a SI method. The influences of OSL on SI results are investigated.