• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.768-773
• /
• 2012

유기 랭킨사이클의 증발기 2차 유체로서 화력발전소에서 버려지는 $35^{\circ}C$의 온배수를 이용하는 경우와 $25^{\circ}C$의 해양 표층수를 이용하는 경우의 사이클 특성을 서로 비교한 후, 유기 랭킨사이클에 화력발전소에서 버려지는 온배수를 유기 랭킨 사이클에 적용 가능한지를 확인 하였다. 본 연구에서 고려된 작동변수는 과열도, 과냉각도, 터빈효율, 펌프효율 등이다. 주요 결과를 요약하면 다음과 같다. 화력발전소에 배출되는 $35^{\circ}C$의 온배수를 적용한 유기 랭킨사이클의 효율이 $25^{\circ}C$의 표층수를 적용한 유기 랭킨사이클에 비해 87% 이상 높게 나타났다. 따라서 화력발전소의 온배수를 유기 랭킨사이클에 적용할 수 있음을 확인할 수 있었다.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.41-47
• /
• 2017

This study aimed to analyze organic Rankine cycle(ORC) which recovers discarded heat from a gas turbine based combined cycle cogeneration(CC-cogen) plant in terms of both performance and economics. The nominal electric power of the CC-cogen plant is around $120MW_e$, and heat for district heating is $153MW_{th}$. The major purpose of this study is to compare various options in selecting heat source of the ORC. Three heat sources were compared. Case 1 uses the exhaust gas from the HRSG, which is purely wasted to environment in normal plant operation without ORC. Case 2 also uses the exhaust gas from the HRSG. On the other hand, in this case, the DH economizer, which is located at the end of the HRSG, does not operate. Case 3 generates power using some of the district heating water which is supplied to consumers. The estimated ORC power generation ranges between 0.3 to 2.3% of the power generation capacity of the CC-cogen plant. Overall, Case 3 is evaluated to be better than other two options in terms of system design flexibility and power generation capacity.

• 한국유체기계학회 논문집
• /
• 제18권4호
• /
• pp.13-21
• /
• 2015

The system design of the Organic Rankine Cycle(ORC) is greatly influenced by the thermal properties such as the temperature or the thermal capacity of heat source. Typically waste heat, solar energy, geothermal energy, and so on are used as the heat source for the ORC. However, thermal energy supplying from these kinds of heat sources cannot be provided constantly. Hence, an experimental study was conducted to utilize fluctuating thermal energy efficiently. For this experiment, an impulse turbine and supersonic nozzles were applied and the supersonic nozzle was used to increase the velocity at the nozzle exit. In addition, these nozzles were used to adjust the mass flowrate depending on the amount of the supplied thermal energy. The experiment was conducted with maximum three nozzles due to the capacity of thermal energy. The experimented results were compared with the predicted results. The experiment showed that the useful output power could be producted from low-grade thermal energy as well as fluctuating thermal energy.

• 에너지공학
• /
• 제21권4호
• /
• pp.393-397
• /
• 2012

본 연구에서는 산업용 가스 엔진의 배기 폐열을 회수하여 발전하는 유기랭킨사이클을 구성하고 시스템 성능 분석 실험을 수행하였다. 엔진 배기가스 열을 작동유체(냉매 R134a)에 흡수시키기 위해 Shell & Tube 방식 열교환기를 엔진 배기 매니폴드 후단에 장착하였다. 엔진출력 60 kW인 조건에서 약 63 kW의 배기가스 열을 배출하였으며, 열교환기를 통해 작동유체에 흡수된 열량은 43~46 kW로서 배기가스 열회수율은 68~73%, 최대출력은 4.6 kW로서 배기가스 열량에 대한 최대출력의 비는 7.3%을 나타내었다.

• ETRI Journal
• /
• 제40권5호
• /
• pp.613-623
• /
• 2018

The instability of operational channels on cognitive radio networks (CRNs), which is due to the stochastic behavior of primary users (PUs), has increased the complexity of the design of the optimal routing criterion (ORC) in CRNs. The exploitation of available opportunities in CRNs, such as the channel diversity, as well as alternative routes provided by the intermediate nodes belonging to routes (internal backup routes) in the route-cost (or weight) determination, complicate the ORC design. In this paper, to cover the channel diversity, the CRN is modeled as a multigraph in which the weight of each edge is determined according to the behavior of PU senders and the protection of PU receivers. Then, an ORC for CRNs, which is referred to as the stability probability of communication between the source node and the destination node (SPC_SD), is proposed. SPC_SD, which is based on the obtained model, internal backup routes, and probability theory, calculates the precise probability of communication stability between the source and destination. The performance evaluation is conducted using simulations, and the results show that the end-to-end performance improved significantly.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.699-705
• /
• 2011

A combined heat and power cogeneration system driven by low-temperature sources is investigated by the first and second laws of thermodynamics. The system consists of Organic Rankine Cycle (ORC) and an additional process heater as a series circuit. Seven working fluids of R152a, propane, isobutane, butane, R11, R123, isopentane and n-pentane are considered in this work. Maximum mass flow rate of a working fluid relative to that of the source fluid is considered to extract maximum power from the source. Results indicate that the second-law efficiency can be significantly increased due to the combined heat and power generation. Furthermore, higher source temperature and lower turbine inlet pressure lead to lower second-law efficiency of ORC system but higher that of combined system. Results also show that the optimum working fluid varies with the source temperature.

• 한국수소및신에너지학회논문집
• /
• 제31권2호
• /
• pp.234-241
• /
• 2020

This paper presents a thermodynamic performance analysis of a combined cycle consisting of regenerative organic Rankine cycle (ORC) and liquefied natural gas (LNG) Rankine cycle to recover low-grade heat source and the cold energy of LNG. The mathematical models are developed and the system performances are analyzed in the aspect of thermodynamics. The effects of the turbine inlet pressure and the working fluid on the system performance such as the mass flow rates, heat transfers at heat exchangers, power productions at turbines, and thermal efficiency are systematically investigated. The results show that the thermodynamic performance of ORC such as net power production and thermal efficiency can be significantly improved by the regenerative ORC and the LNG cold energy.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.107-113
• /
• 2013

본 논문은 산업현장에서 발생하는 폐열원을 이용하여 200kW의 발전을 하기위한 터빈의 개발에 관한 전반적인 과정이 제시되었다. 유기 랭킨 사이클에 적용되는 터빈은 세계적으로도 개발이 활발히 진행되고 있는 단계이며, 시장 성장에 관한 잠재성이 크다. 따라서 국내의 연구기관에서도 많은 관심을 가지고 연구가 진행되고 있지만 상품 개발까지는 아직 도달하지 못하고 있는 상황이다. 본 논문에서는 유기 랭킨 사이클에서 작동하는 200kW급 터빈을 개발 하는데, 사이클 해석을 바탕으로 비속도 분석, mean line 해석, 3차원 해석 과정이 설명되었다. 그리고 해석 결과를 바탕으로 터빈 요소 부품을 제작하였고, 회전체 안정성 시험 및 성능시험을 수행하였다. 터빈 개발은 세계적으로도 활발히 이루어지지만 개발 과정과 단계에 대한 사항은 기업 비밀이란 이유로 공개 되지 않는 실정이다. 본 논문은 유기 랭킨 사이클용 터빈의 개발에 있어 어떠한 과정과 단계로 진행되는지 참고가 될 수 있을 것이다.

• 지열에너지저널
• /
• 제7권4호
• /
• pp.56-63
• /
• 2011

• 대한설비공학회지:설비저널
• /
• 제41권9호
• /
• pp.46-51
• /
• 2012