• Title/Summary/Keyword: ORA

Search Result 57, Processing Time 0.019 seconds

Optimal Echo phase of FLASH sequence for Brain Enhancement scan of mouse at 9.4T MRI system (9.4T MRI FLASH Sequence에서 마우스의 뇌 조영증강 검사를 위한 적정 Echo phase)

  • Jeong, Hyunkeun;Kim, Mingi;Nam, Kichang;Jung, Hyundo;Ahn, Chigwon;Kim, Hochul
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.54 no.7
    • /
    • pp.115-124
    • /
    • 2017
  • The objective of study was to investigate the optimal echo phase for mouse brain enhancement scan using fast low angle shot (FLASH) sequence of 9.4T magnetic resonance imaging (MRI). For quantification based on this method, an MR phantom experiment and clinical research were done. The phantom experiment was conducted by fabricating three phantoms with different molar concentration of gadolinium to create changes in echo phase of 9.4T FLASH sequence used in mouse brain scans. In the phantom experiment, SSI was 25~27 [arbitrary units, a.u.] in each of 33 phases from $6{\pi}$ to $28{\pi}$, while RSP was 30~100 mmol. MPSI was 47~52 [a.u], while MPP, where MPSI is seen, was 0.8~9 mmol. EPMS was 80.8~108.0%, while ASIMP was formed between 21.1 and 31.8 [a.u]. In the clinical research, Finally, the occurrence rate of artifact that expressed -1 nd +1. The present study was able to quantify the degree of enhancement at FLASH sequence of 9.4T MRI, as well as identify the optimal echo phase during mouse brain enhancement scan.

Habitat Environment and Vegetation Structure of Forest Communities Growing Schisandra nigra Maxim. in Cheju Island of Korea (흑오미자 자생 임분의 입지환경과 식생구조)

  • Lee Kab-Yeon;Kim Sea-Hyun;Kim Pan-Gi;Shin Chang-Ho;Han Sang-Sup
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.1 no.2
    • /
    • pp.81-89
    • /
    • 1999
  • To propose basic information for natural resource management and conservation strategy of Schisan-dra nigra Maxim., its habitat environment and vegetation structure of forest communities growing the species was investigated. Fourteen plots (each plot size 400 $m^2$) were set up at the distributed area of Cheju island, southern part of Korea. S. nigra is the economic useful species that scatteringly grows at 850~920 m in the western part, at 660~710 m in the northern part and at 750~1,250 m in the southern part of Mt. Halla. The community of S. nigra in Mt. Halla is the mixed secondary forest of pine and broad leaved trees that are mainly composed of Pinus densif1ora, Quercus serrata, Styrax japonica, Lin-dera erythrocarpa and Carpinus laxiflora. The density in a main distribution sector of S. nigra appears in the range of 3~39 individuals per each 20$\times$20 m plot. The distribution patterns by Morisita's Index showed that S. nigra was distributed randomly in all of the stands. The association analysis showed that the following tree species were positively associated with S. nigra. In other words, the following trees were appeared to require the same ecological niche together with S. nigra: Lindera erythrocarpa, Cornus waltri, Acer mono, and Styrax japonica.

  • PDF

The study on toothbrush filaments (칫솔 강모 형태에 관한 연구)

  • Han, Seung-Min;Yang, Seung-Min;Lee, Young-Moo;Ku, Young;Rhyu, In-Chul;Chung, Chong-Pyoung;Choi, Sang-Mook;Han, Soo-Boo
    • Journal of Periodontal and Implant Science
    • /
    • v.32 no.4
    • /
    • pp.857-864
    • /
    • 2002
  • The aim of this study is to investigate the end of filaments of the different toothbrushes in the market through the stereomicroscope and to evaluate the % of rounded-end filaments considered to be acceptable. 9 brands, total 11 type toothbrushes were tested. 2 toothbrushes of each type which is marked as rounded-end filaments were tested. The toothbrushes which are not marked as rounded-end filaments were excluded. The domestic as well as foreign toothbrushes which are familiar to consumers were tested. 2 tufts of each toothbrushes were cut and examined by stereomicroscope using $40{\times}$ magnification. The procedure was carried out with blind-technique, and the digital photographs were taken. Besides the % of rounded-end filaments, total tufts number, material of the tuft, stiffness, and other special characteristics were recorded. By the classification of Silverstone and Featherstone, rounded-end filaments were examined and counted. The results shows that there are different range of rounded-end filaments according to the toothbrush types(17.7%-91.2%). Atman toothbrush has the most rounded-end filaments(91.2%) among the observed toothbrushes, and the Advantage Plus(Ora1-B) has the next(86.75%). E-Clean #411 has the least(17.70%) and E-Clean #410 of the same brand has also low % rounded-end filaments(20.60%). While G.U.M #409(Butler) has 67.90% rounded-end filaments, G.U.M #471 of the Same brand has comparative low 41.83% rounded-end filaments. 4 types of total 11 have the rounded-end filaments over 80%, however other 4 types have under even 50%. Considering that the correct brushing habit with a toothbrush which has rounded-end filaments can protect the gingival injury and tooth abrasion, it is thought that we dentists need to give the correct information about toothbrush to the patients

Fabrication and Performance Evaluation of MR-16 Lamp Series with Narrow Angular Distribution of Luminous Intensity Using an Aspherical Planar-convex 2×2 Fly-eye Lens Type (평면-비구면 2×2 fly-eye 렌즈형태의 2차 렌즈를 사용한 고효율의 좁은 배광각을 갖는 MR-16 램프 시리즈 제작 및 성능평가)

  • Chu, Kyung-duk;Ryu, Jae Myung;Hong, Chun-Gang;Jeong, Youn Hong;Jo, Jae Heung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.8
    • /
    • pp.25-33
    • /
    • 2017
  • This paper reports the optical design of the MR-16 lamp series with a LED second lens and an aspherical plano-convex lens suitable for a simple and rapid injection molding fabrication method. The fabrication and performance evaluation of the MR-16 lamp series, which was designed with a narrow angular distribution of luminous intensity, were conducted to replace halogen lamps with LED lamps. Four types of LED lamps were fabricated, which have angular distributions of luminous intensity of $22.4^{\circ}$, $31.1^{\circ}$, $37.3^{\circ}$, and $59.9^{\circ}$ and luminous efficiencies of 76.5 lm/W, 75.2 lm/W, 72.0 lm/W, and 77.8 lm/W, respectively, while their spreading angles with an illuminance uniformity of 81% were $3^{\circ}$, $15^{\circ}$, $22^{\circ}$, and $49^{\circ}$, respectively. After eliminating a yellow tail of the LED lamps using a diffusion sheet, the angular distributions of the luminous intensity were measured to be $20.8^{\circ}$, $31.5^{\circ}$, $37.8^{\circ}$, and $68.7^{\circ}$.

The effect analysis of birefringence of plastic f$\heta$ Iens on the beam diameter (플라스틱 f$\heta$렌즈의 복굴절이 결상빔경에 미치는 영향분석)

  • 임천석
    • Korean Journal of Optics and Photonics
    • /
    • v.11 no.2
    • /
    • pp.73-79
    • /
    • 2000
  • We measure a beam diameter of scan and sub-scan direction of LSD (Laser Scanning Urnt) which uses $fheta$ lens produced by injecLion molding method as a scanning lens. While the measured beam diameter in scan direction, which is $62muextrm{m}$ to $68\mu\textrm{m}$, shows similar size comparing to the design beam diameter, the sub-scan beam diameter shows sIzable beam diameter deviation as much as 37 11m ranging from $78\mu\textrm{m}$ to $115\mu\textrm{m}$. Injection molding lens has the surface figure error due to the shrinkage III the cooling time and the internal distortion (birefringence) due to the uneven cooling conditIOn so that these bring about wavefront aberration (i.e., the enlargement of beam size), and are eventually expre~sed as the deterioration of the pdnting image. In this paper. we first measure and analyze beam diameter, birefringence (polanzation ratio), and asphedcal figure error of mIens in order to know the principle cause of the beam diameter deviation in sub-scan directIOn. And Lhen. through the analysis of a designed depth of focus and a calculated field curvature (imaging position of the optical axis directIon) using the above figure elTor data, we know Lhat the birefringence IS the main factor of sizable beam diameter deVIation in sub-scan direction. ction.

  • PDF

Andic Properties of Major soils in Cheju Island 1. Characterization of Volcanic Ash Soils by Selective Dissolution Analysis (제주도(濟州島) 대표토양(代表土壤)의 Andic 특성(特性)에 관(關)한 연구(硏究) 1. 선택적(選擇的) 추출방법(抽出方法)에 의(依)한 화산회토(火山灰土)의 특성(特性) 구명(究明))

  • Song, Kwan-Cheol;Yoo, Sun-Ho
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.24 no.2
    • /
    • pp.86-94
    • /
    • 1991
  • Volcanic ash soils were classified as Andepts, a suborder of the Inceptisols in Soil Taxonomy. Increased knowledge on the volcanic ash soils necessitated and facilitated considerable improvement in this system. As a result, the new Order of Andisols was incorporated in the 1990 edition of the Keys to Soil Taxonomy. The central concept of an Andisol is that of a soil developing in volcanic ejecta, and/or in volcaniclastic materials, whose colloidal fractions are dominated by short-range-order minerals or Al-humus complexes. Andic propertis of volcanic ash soil in Cheju Island were investigated. For this study, soils of toposequence distributed along the southern slope of Mt. Halla, and the major soil groups such as dark brown soils, very dark brown soils, black soils, and brown forest soils were collected and analyzed for Al, Fe and Si extracted with solutions of pyrophosphate, dithionite-citrate. and oxalate respectively. Weolpyeong and Yongheung soils developed on the lower elevations contain only small amounts of allophane and Al-and Fe-humus complexes. For other soils, allophane content decrease with elevation and increaes with soil depth,whereas Al-humus complexes increase with elevation and decrease with soil depth. Substantial amount of allophane and ferrihydrite are found in all horizons of Ora and Ara soils developed on 150-300m elevations and of Noro and Jeogag soils developed on cinder cones. In the A horizons of Pyeongdae, Tosan and Heugag soils developed on the higher elevations, Al-humus complexes are dominant form of Al reflecting low pH and high organic matter content. However, lower horizons are dominated by allophane.

  • PDF

Experimental study on Cervi Cornu on Adjuvant Arthritis in rats (록각(鹿角)의 Adjuvant 관절염(關節炎)에 대한 실험적(實驗的) 연구(硏究))

  • Shin, Ji-Won;Park, Jai-Young;Park, Hee-Soo
    • Journal of Pharmacopuncture
    • /
    • v.5 no.1 s.8
    • /
    • pp.113-133
    • /
    • 2002
  • Objective: To investigate effects of Cervi Cornu on Adjuvant Athritis in rats, the edema inhibit rate, the anaJgesic effects, the number of WBC, RA facter, Platelet, the quantity of CRP, total protein, albumin and globuline in the blood serum were measured in the arthritis part. Results: The results obtained as fonows ; 1. After arthritis of Sprague dawley(SD) rats was induced by injecting Freund's complete adjuvant for 2 weeks, any treatment was not for Control group, acupunctured for Treat Ⅰ group. normal saJine was ora] administrated for the Treat Ⅱ group, Cervi Cornu Ex. was oral administrated for Treat Ⅲ, and Cervi Cornu Herbal-acupullcture was injected for Trea Ⅳ group during 2 weeks every other day. Selected point was on pressure pain point in both groups. And then the edema inhibit rate were checked. The edema inhibit rate was $46.03\%$ in Treat I group, $43.24\%$ Treat IV group, $37.44\%$ in Treat III. there was significance in the edema inhibit rate between Control group and Treat group, in order of Treat Ⅰ, Ⅳ, Ⅲ.(p<0.05) 2. The analgesic effects was $7.58{\pm}1.80$(${\times}10$gm) in Control group. $11.00{\pm}1.10$(${\times}10$gm) in Treat Ⅰ group. $99.92{\pm}1.28$(${\times}10$gm) in Treat Ⅲ group and $14.67{\pm}1.03$(${\times}10$gm) in Treat Ⅳ group. There was significance in the analgesic effects between Control group and Treat group(p<0.05) 3. The number of WBC was $14.72{\pm}1.48$(${\times}10^3$㎕) in control Group, $10.26{\pm}1.13$(${\times}10^3$㎕) in Treat Ⅰ group, $11.00{\pm}1.13$(${\times}103$㎕) in Treat Ⅱ Group and $9.63{\pm}1.75$(${\times}10^3$㎕) in Treat Ⅳ group. There was significance in the number of WBC between Control group and Treat group(p<0.05) 4. The content of total protein in the blood serum were $6.13{\pm}0.05$g/dl in control group, $5.73{\pm}0.14$g/dl in Treat I group, $5.88{\pm}0.13$g/dl in Treat Ⅲ group and $5.90{\pm}0.13$g/dl in Treat IV group. There was significance in The content of total protein in the blood serum between Control group and Treat group(p<0.05) 5. The contests of albumin in the blood serum were $2.32{\pm}0.12$g/dl in the Control group, $2.35{\pm}0.05$g/dl in Treat Ⅰ group, $2.35{\pm}0.05$g/dl in Treat Ⅱ group, $2.30{\pm}0.06$g/dl in Treat Ⅲ group, $2.42{\pm}0.08$g/dl in Treat IV group. There was no significance in The content of albumin in the blood serum between Control group and Treat group(p<0.05) 6. The contests of globulin in the blood semm were $3.68{\pm}0.08$g/dl in the Control group, $3.43{\pm}0.12$g/dl in Treat Ⅰ group, $3.55{\pm}0.10$g/dl in Treat IV group. There was significance in The content of globulin in the blood serum between Control group and Treat group(p<0.05) 7. The numbers of RA factor were $3.47{\pm}0.54$IU/ml in Control group and $2.38{\pm}0.50$IU/ml in Treat Ⅱ group. There was significance inThe numbers of RA factor between Control group and Treat group(p<0.05) 8. The numbers of platelet were $1126.33{\pm}1126.33{\pm}85.93{times}10^3$/㎕ in Control group, $1043.33{\pm}80.80{times}10^3$/㎕ in Treat Ⅰ group, $1116.82{\pm}77.93{times}10^3$/㎕ in Treat Ⅱ group, $1164.17{\pm}94.02{times}10^3$/㎕l in Treat Ⅲ group, $1076.67{\pm}54.84{times}10^3$/㎕ in Treat Ⅳ group. There was no significance in The numbers of platelet between Control group and Treat group(p<0.05) 9. The quantity of CRP were $0.05{\pm}0.01$mg/ml in Control group, $0.05{\pm}0.01$mg/ml in Treat Ⅰ group, $0.06{\pm}0.01$mg/ml in Treat Ⅱ group, $0.05{\pm}0.00$mg/ml in Treat Ⅲ group, $0.05{\pm}0.00$mg/ml in Treat Ⅳ group. There was no significance in The quantity of CRP between Control group and Treat group(p<0.05) Concluslon : From these results, it is shown Cervi Comu Herbal-acupuncture more efffective thaJJ Cervi Cornu Ex. on Adjuvant Arthritis in rats.