• Communications of the Korean Mathematical Society
• /
• v.29 no.4
• /
• pp.555-568
• /
• 2014

A set with an operation defined on a family of subsets is studied. The operation is used to generalize the topological space itself. The operation defines the operation-open subsets in the set. Relations are studied among two types of the interiors and the closures of subsets. Some properties of maximal operation-open sets are obtained. Semi-open sets and pre-open sets are defined in the sets with operations and some relations among them are proved.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.35-36
• /
• 2012

Part load operation usually covers large periods of the total operation time on the economic ground and electricity demand in small-scale boilers. Performance analysis of part load behavior is very important for the purpose of boiler operation optimization. A simple thermal calculation approach is applied to predict performance of a pilot-scale circulating fluidized bed (CFB) boiler at part load operation. Verification has been carried out by comparing between calculation results an operation data of the boiler.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.384-387
• /
• 1995

A helicopter is used in a variety of situations because of its usability. Its operation, needs human skill. The authors are working on automatization of human skill. Helicopter operation is one of such fields of practicing human skill. This is why the present paper deals with helicopter (model helicopter) operation. Full operation of a helicopter needs more complicated system in both aspects of software and hardware, and also requires more training for operation. From the purpose here that helicopter operation is for checking the applicability of the authors' idea for automatization based on experience, attitude regulation in hovering is the target. In the present paper, a human operator's operation is recorded as a time series of operation actions, and the record is reorganized as the correspondence between the helicopter's attitude and the proper operation action required in that particular situation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.123-130
• /
• 1999

The bus as a feeder trip should supply equality service to the whole community. But in spite of the change of latent demand to the bus by the variety of regional structural change, the existing bus route can not supply effective feeder service. For cope with the latent demand to the bus, this study establish a concept that frame of the bus operation and management. This study tackled to evidence this fact by analyzing the bus transport problems in terms of the urban growth, and following issues were discussed: 1) the strategy for improvement of bus operation, 2) the land use control which is appropriate for the public transport network, 3) the economical range to justify the bus operation, 4) the allowance for the private transport mode. On the second part of this study, the difference on the bus operation was compared to determine the range within which the bus operation can be justified. This would provide the direction to improve the management for bus operation and fundamental information to develop the bus operation system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.881-887
• /
• 2005

A total knee replacement is an extremely 'position-sensitive' operation; a malposition or a malalignment of the components will lead to a breakage of the component, a fracture around the knee prosthesis, and the limitation of range of the motion, etc. In a conventional total knee replacement, surgeons have to select an appropriate prosthesis according to the shape of the surgical region. A wrong selection may give rise to side effects or to need re-operation. Nevertheless, it is so difficult to choose the most proper prosthesis out of various kinds of prosthesis. This paper presents a surgical planning system for the total knee replacement with an operation simulating method in order to determine the parameters for the total knee replacement operation. We select an alignment axis and a resection angle as major operation parameters in the total knee replacement operation, and introduce the method to determine the major operation parameters with the operation simulator we developed. The simulator is used to determine operation parameters for optimized operations, to select the most appropriate prosthesis, and to analyze the prospective problems of the operation.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.31-33
• /
• 2003

Recently, KARI developed in-house meteorological sensor processing system named MESIS for GOES GVAR 5-CH Imager for better KOMPSAT EOC mission operation. MESIS consists of antenna system, receiver, serial telemetry card, processing and mapping software, and 2 NT PC systems. This paper shows system requirement, system design, characteristic and test results of processing system. System operation concept and sample image are also provided. Implemented system was proven to be fully operational through lots of operations covering from RF signal reception to web publishing.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.129-138
• /
• 1993

The shortage of agricultural labour due to industrial growth has greatly induced the mechanization in Korean agriculture. However small and scattered land holdings have been the main constraints in the process of mechanization. This paper describes the interrelationships of farm land structure, machinery selection and machinery operation areas. The sandy silt loam irrigated paddy land having single crop a year was selected as a target areas for this study. Machine operation cost is greatly influenced by operation period, plot geometry and operation area. On the improved geometry plots, optimal machine size increases slowly with increase in operation area. Operable area increases due to increased effective machine capacity on better geometry plot. The difference between the effects of operation period and plot geometry is that in the former case, the cost reduction is caused by delay in increase of machine size, whereas in the latter case timeliness cost is reduced by increase ffective capacity. The effect of farmland consolidation is greater on small plots than that on big plots. Increasing wage rates have induced the adoption of more labor saving machinery. Bigger labor saving machines require enlargement of operation area and larger plots through improvement in farm land structure. Machine cost on poor plot geometry increases more rapidly than that on the good plot geometry and as operation area increases machine cost reduces significantly. It is concluded that the development of agricultural mechanization ion Korea will depend on the improvement in farm land structure and enlargement of operation area.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.38-48
• /
• 2007

this paper analyses how much acceleration and deceleration of urban rail vehicle should be applied and how to choose an operation mode to minimize energy consumption when train runs between stations within the fixed operation time. The decided operation pattern satisfying the minimum energy consumption becomes a target trajectory and a basis for the controller design criteria. To make this goal it grasps the characteristics of urban rail vehicle, realize operation energy model of urban rail vehicle and verity the accuracy of embodied model the Matlab simulation with the same operation result of real route. It searches for operation pattern to minimize operation energy by changing the acceleration and deceleration on the imaginative route and proposes operation pattern minimizing energy consumption by applying real operation data between stations of Seoul Metropolitan Subway Line 6.

• Convergence Security Journal
• /
• v.21 no.3
• /
• pp.39-47
• /
• 2021

Standardization of the security operation dashboard is essential for efficient operation of security operation center. The security operation dashboard should be configured so that it is widely used by security operation workers who have to live together 24 hours a day, 365 days a year. In addition, it must be able to comprehensively express the business activities of the security operation center. In addition, it should be possible to easily explain the business activities of the security operation center. Therefore, in this paper, we would like to explain the design of a security control dashboard based on blockade, detection, and response that is actually applied to case organizations in the power sector. Through this, it is intended to reduce the effort and time required for configuring a custom dashboard for VIPs, and contribute to the efficient operation of the security operation center.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.400-408
• /
• 2009

Simulation applications for analyzing the productivity of construction operations at operation level and project schedules at project level are crucial methods in project management. The application at two different levels should be very tightly linked to each other in practice. However, appropriate integration at the levels is not achieved in that existing systems do not support to integrate operation models into a schedule model. This paper presents a new approach named to Discrete Event Simulation-Nesting modeling approach, which supports not only productivity analysis at operation level but also schedule management at a project level. The system developed by the authors allows creating operation models at the operation level, maintaining them in operation model library, executing sensitivity analysis to find the behaviors of the operation models when different combination of resources are used as existing DES systems do. On top of the conventional functions, the new system facilitates to find the optimum solution of resource combinations which satisfy the user's interest by computing the hourly productivity and the hourly cost of the operation. By drag-and-dropping an operation model kept in the operation model library, the operation models are integrated into an activity of the schedule model. When a complete schedule model is established by nesting operation models into the schedule model, stochastic simulation based scheduling is executed. A case study is presented to demonstrate the new simulation system and verify the validity of the system.