• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.361-364
• /
• 2006

The numerical methods of finding the optimal position of optical phase conjugator (OPC) and the optimal fiber dispersions are proposed, which are able to effectively compensate overall channels in $8\times40$ Gbps WDM system with non zero - dispersion shifted fiber (NZ-DSF) as an optical fiber. And BER characteristics in the system with two induced optimal parameters are compared with those in the system with the currently used mid-span spectral inversion (MSSI) in order to confirm the availability of the proposed methods. It is confirmed that the applying two induced optimal parameters into WDM system contribute to reduce power penalty to 4 times than that of WDM system with the conventional MSSI.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.96-102
• /
• 2019

When GGBFS(Ground Granulated Blast Furnace Slag) with high blaine is incorporated in concrete, compressive strength in the initial period is improved, but several engineering problems arise such as heat of hydration and quality control. In this paper, compressive strength and durability performance of concrete with 3,000 Grade-low fineness slag are evaluated. Three conditions of concrete mixtures are considered considering workability, and the related durability tests are performed. Although the strength of concrete with 3,000 Grade slag is slightly lower than the OPC(Ordinary Portland Cement) concrete at the age of 28 days, but insignificant difference is observed in long-term compressive strength due to latent hydration activity. The durability performances in concrete with low fineness slag show that the resistances to carbonation and freezing/thawing action are slightly higher than those of concrete with high fineness slag, since reduced unit water content is considered in 3,000 Grade slag mixture. For the long-term age, the chloride diffusion coefficient of the 3000-grade slag mixture is reduced to 20% compared to the OPC mixture, and the excellent chloride resistance are evaluated. Compared with concrete with OPC and high fineness GGBFS, concrete with lower fineness GGBFS can keep reasonable workability and durability performance with reduced water content.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.41-47
• /
• 2021

Manufacturing is facing radical changes around the world. The manufacturing industry, which has been changing since Germany, is now being introduced, improved, and developed worldwide by manufacturers under the name of smart factory. By utilizing IT technologies such as artificial intelligence and cloud at the production site, the desire to break away from the past manufacturing environment is increasing. How these technologies will be efficient in the future, manufacturing worldwide now faces radical changes. The manufacturing industry, which has been changing since Germany, is now being introduced, improved, and developed worldwide by manufacturers under the name of smart factory. By utilizing IT technologies such as artificial intelligence and cloud at the production site, the desire to break away from the past manufacturing environment is increasing. Discussions continue on how these technologies can be used efficiently and effectively. Increasingly, the expansion of the range from factory areas to regions, countries, and around the world raises the need for international standards for interactions. In this paper, we propose a design and implementation method for managing facilities, sensors, etc. as assets and monitoring facility data collected through OPC UA.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.1-9
• /
• 2019

GGBFS(Ground Granulated Blast Furnace Slag), one of the representative concrete mineral admixtures, improves the long-term durability and engineering performance of concrete by latent hydraulic activity. In this study, considering 3 levels of W/B(0.37, 0.42, 0.47) and GGBFS replacement ratio(0 %, 30 %, 50 %), durability performances for chloride attack are evaluated, and equations which predict behavior of accelerated chloride diffusion are proposed. Also, the relationship between accelerated chloride diffusion coefficient and passed charge is evaluated. In target curing day, accelerated chloride diffusion tests(Tang's method, ASTM C 1202) and compressive strength(KS F 2405) are performed. In the 730 day's results of accelerated chloride diffusion coefficient, GGBFS concrete has up to 28 % of decreasing ratio compared to OPC concrete, and in those of passed charge, GGBFS concrete has up to 29 % of decreasing ratio compared to OPC concrete. Also, it is deemed that the impact of variation of W/B is less in GGBFS concrete than in OPC concrete. The equations which predict accelerated chloride diffusion coefficient and passed charge are drawn, based on the characteristics of mixture and test results. The equation which predicts passed charge shows slightly higher coefficient of determination than that which predicts accelerated chloride diffusion coefficient.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.113-119
• /
• 2019

Many researches on alternative materials as construction materials is continuing by recycling industrial byproducts due to shortage of sitereclamation and natural aggregates. In this paper, engineering properties in early-aged OPC (Ordinary Portland Cement) and GGBFS (Ground Granulated Blast Furnace Slag) concrete are evaluated with EOS aggregate replacement. The related experiments were carried out with 0.6 of water to binder ratio, three levels of EOS replacement ratios (0%, 30% and 50%) for fine aggregate, and two levels of cement replacement with GGBFS (0% and 40%). Several tests such as slump air content, and unit mass measurement are performed for fresh concrete, and compressive strength and diffusion coefficient referred to NT BUILD 492 method are measured for hardened concrete. Through the tests, it was evaluated that the compressive strength in concrete with EOS aggregate increased to 3 days and 7 days but slightly decreased at the age of 28 days. In the accelerated chloride penetration test, GGBFS concrete showed reduced diffusion coefficients by 60 - 67% compared with OPC concrete. The lowest chloride diffusion coefficient was evaluated in the 50% replacement with EOS aggregate, which showed an applicability of EOS aggregate to concrete production.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.250-253
• /
• 2005

A Programmable Automation Controller (PAC) has been developed by Turbotek Co., Ltd. The developed system has multi-domain functionality-including sequence control, motion control and HMI- on a single platform. The PAC also has a common development platform for the design and integration of multi-domain automated systems. Since hardware of the developed system has modular architectures, performance and specification of the controller are determined by combination of specific modules. The developed system employs de facto standards such as OPC interface that allow users to easily exchange data as part of networked multi-vendor systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.483-483
• /
• 2000

The Fuzzy Preview Control (FPC) design methodology using I-PD Preview Control (IPC) and Optimal Preview Control (OPC)[6] are discussed in this paper. First we show a new fuzzy controller with single input single output, and build a relationship between it and the I-PD Control proposed by Kitamari, as well as Optimal Control with some specific equations. We also give the stability analysis with Lyapunov theorem. On this way, we can design a Fuzzy I-PD Controller (FIC) very easier and more effective. Then, preview control element design methodology of FCP was given according to IPC and OPC. Third, to make the system more rapidly and more little overshooting, two factors are given to adjust the controller's properties. At last, the performance of FPC is revealed via computer simulation using a nonlinear plant.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1096-1099
• /
• 2019

In this paper, we propose the protocol for construction of smart factory. The proposed protocol for construction of smart factory consists of an OPC UA Server/Client, a technology of TSN realtime communication, a NTP & PTP time synchronization protocol, a FieldBus protocol and conversion module, a technology of saving data for data transmit latency and synchronization protocol. OPC UA server/client is a system integration protocol which makes interface industrial hardware device and supports standardization which allows in all around area and also in not independent from any platform. A technology of TSN realtime communication provides an high sensitive time management and control technology in a way of sharing specific time between devices in the field of high speed network. NTP & PTP time synchronization protocol supports IEEE1588 standardization. A fieldbus protocol and conversion module provide an extendable connectivity by converting industrial protocol to OPC. A technology of saving data for data transmit latency and synchronization protocol provide a resolution function for a loss and latency of data. Results from testing agencies to assess the performance of proposed protocol for construction of smart factory, response time was 0.1367ms, synchronization time was 0.404ms, quantity of concurrent access was 100ea, quantity of interacting protocol was 5ea, data saving and synchronization was 1,000 nodes. It produced the same result as the world's highest level.

• Annual Conference of KIPS
• /
• 2003.05b
• /
• pp.1233-1236
• /
• 2003

오늘날 장비 제어 기술은 장비 제어 시스템 개발의 비용을 효과적으로 줄이고 유연하고 효율적인 개방 구조로의 전환이 요구되고 있다. 그러나 대부분의 장비 제어 시스템들은 그들 자신의 구조를 기반으로 각기 다른 방법으로 구현이 되어 있어 시스템의 개발 및 통합에 많은 비용이 든다. 본 논문에서는 장비 제어의 표준으로 등장하는 OPC를 이용하여 장비 구성요소들 간의 복잡한 활동을 디자인하고 시뮬레이션 하는 디자인 도구(iMaker)에 관하여 기술한다. 또한 XML 기술을 사용하여 OPC 기반의 장비의 특성과 행위를 모델링 하였다. iMaker는 장비의 행위를 미리 구성하고 시뮬레이션을 통하여 장비 개발의 질을 향상시키고 발생 가능한 문제를 미리 예측할 수 있으므로 장비 제어 시스템의 개발 및 유지보수에 대한 비용을 현저히 줄일 수 있다.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.394-400
• /
• 2007

We induced the optimal values of optical phase conjugator (OPC) position and dispersion coefficients of fiber sections depending on frequency chirp, which is substantially generated in optical signal by optical modulator and affects the transmission performances. In order to investigate the relation of optimal parameters with various frequency chirp, in this paper, positive(down) chirp, chirp-free and positive(up) chirp are assumed in 40 Gbps ${\times}$ 16 channels WDM transmission system of NRZ format with extinction ratio of 10 dB, which are the worst system parameters in the factor affecting system performance. It is confirmed that the OPC position offset and dispersion offsets between both fiber sections are more increased as frequency chirp become larger. It is also confirmed that the effect of the induced values on the compensation of WDM channels with negative frequency chirp is better than WDM channels with positive frequency chirp.